Gekko's role in the game system was to facilitate game scripting, Artificial Intelligence, physics and collision detection, custom graphics lighting effects and geometry such as smooth transformations, and moving graphics data through the system.
The project was announced in 1999 when IBM and Nintendo agreed to a $1 billion dollar contract (IBM's largest ever single order)[1] for a CPU running at approximately 400 MHz. IBM chose to modify their existing PowerPC 750CXe processor to suit Nintendo's needs, such as tight and balanced operation alongside the "Flipper" graphics processor. The customization was to the bus architecture, DMA, compression and floating point unit which support a special set of SIMD instructions. The CPU made ground work for custom lighting and geometry effects and could burst compressed data directly to the GPU.[citation needed]
The Gekko is considered to be the direct ancestor to the Broadway processor, also designed and manufactured by IBM, that powers the Wii console.
4 stages long two-integer ALUs (IU1 and IU2) – 32 bit
7 stages long Floating Point Unit – 64-bit double-precision FPU, usable as 2 × 32-bit SIMD for 1.9 single-precision GFLOPS performance using the Multiply–accumulate operation. The SIMD is often found under the denomination "paired singles."
Branch Prediction Unit (BPU)
Load-Store Unit (LSU)
System Register Unit (SRU)
Memory Management Unit (MMU)
Branch Target Instruction Cache (BTIC)
SIMD Instructions – PowerPC750 + roughly 50 new SIMD instructions, geared toward 3D graphics
Front-side Bus – 64-bit enhanced 60x bus to GPU/chipset at 162 MHz clock with 1.3 GB/s peak bandwidth
