This article relies excessively on references to primary sources. Please improve this article by adding secondary or tertiary sources. Find sources: "Shay locomotive" – news · newspapers · books · scholar · JSTOR (October 2021) (Learn how and when to remove this message)
This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.Find sources: "Shay locomotive" – news · newspapers · books · scholar · JSTOR (August 2023) (Learn how and when to remove this message)
Shay Sonora Class C No. 7 (three driven trucks and articulated tender)
Shay Sonora Class C No. 7
Roaring Camp & Big Trees Narrow Gauge Railroad, Felton, California
Drive side of the Class B Shay locomotive No. 1 Dixiana at the Roaring Camp & Big Trees Narrow Gauge Railroad, Felton, California
Accessory side of the No. 1 Dixiana

The Shay locomotive is a geared steam locomotive that originated and was primarily used in North America. The locomotives were built to the patents of Ephraim Shay, who has been credited with the popularization of the concept of a geared steam locomotive. Although the design of Ephraim Shay's early locomotives differed from later ones, there is a clear line of development that joins all Shays. Shay locomotives were especially suited to logging, mining and industrial operations and could operate successfully on steep or poor quality track.

Development

Ephraim Shay (1839–1916), was a schoolteacher, a clerk in an American Civil War hospital, a civil servant, a logger, a merchant, a railway owner, and an inventor who lived in Michigan.

In the 1860s, he became a logger and wanted a better way to move logs to the mill than on winter snow sleds. He built his own tramway in 1875, on 2 ft 2 in (660 mm) gauge track on wooden ties, allowing him to log all year round. Two years later he developed the idea of having an engine sit on a flatcar with a boiler, gears, and trucks that could pivot. The first Shay only had two cylinders and the front truck was mounted normally while the rear truck was fixed to the frame and could not swivel, much as normal drivers on a locomotive. He mounted the 3-foot (914 mm) diameter by 5-foot (1,524 mm) tall boiler centered on the car with the water tank over the front trucks and with an engine supplied by William Crippen mounted crossways over the rear trucks. Shay experimented first with a chain drive from the engine through the floor to the truck axle. It is not known if he powered one or both axles, but he soon found that the chain drive was not practical and he next tried a belt drive. It did not take long for the idea to become popular.

Shay applied for and was issued a patent for the basic idea in 1881.[1] He patented an improved geared truck for his engines in 1901.[2]

Lima Locomotive Works of Lima, Ohio built Ephraim Shay's prototype engine in 1880.[3] Prior to 1884, all the Shays Lima produced weighed 10 to 15 short tons (8.9 to 13.4 long tons; 9.1 to 13.6 t) each and had just two cylinders. In 1884, they delivered the first 3-cylinder (Class B) Shay, and in 1885, the first 3-truck (Class C) Shay. The success of the Shay led to a major expansion and reorganization of the Lima company.[4] When Lima first received the Shay idea it was not impressed, until John Carnes influenced the company to use the idea, resulting in the classic Shay design.

In 1903, Lima could claim that it had delivered the "heaviest locomotive on drivers in the world", the first 4-truck (class D) Shay, weighing 140 short tons (120 long tons; 130 t). This was built for the El Paso Rock Island Line from Alamogordo, New Mexico to Cox Canyon, 31 miles (50 km) away over winding curves and grades of up to 6%. The use of a two-truck tender was necessary because the poor water quality along the line meant that the locomotive had to carry enough water for a round trip.[5][better source needed]

Lewis E. Feightner, working for Lima, patented improved engine mounting brackets and a superheater for the Shay in 1908 and 1909.[6][7]

After the basic Shay patents had expired, Willamette Iron and Steel Works of Portland, Oregon, manufactured Shay-type locomotives, and in 1927, Willamette obtained a patent on an improved geared truck for such locomotives.[8] These became known as Willamette locomotives. Since "Shay" was a trademark of Lima, strictly speaking it is incorrect to refer to locomotives manufactured by Willamette and others as "Shays". Six Shay Patent locomotives, known as Henderson-style Shays, were built by the Michigan Iron Works in Cadillac, Michigan.

Overview

According to Lima Locomotive Works in 1925, "The Shay Geared Locomotive has a wide and varied range of service, being used in industrial, quarry, contractors, logging, mining and plantation work; (also on branch lines and mountain sections of trunk-line railways). It is especially adapted to industrial railroads in and around large manufacturing plants. Its value as a switching engine is due to the rapidity with which it will accelerate a load and to its ability to spot cars in a minimum of time. It is designed to take any curve on which standard cars can be operated."[9] The company emphasized its performance on "steep grades", "uneven track", and "track too light for a direct engine of the same axle load".[9]

Shay locomotives had regular fire-tube boilers offset to the left to provide space for, and counterbalance the weight of, a two or three cylinder "motor," mounted vertically on the right with longitudinal drive shafts extending fore and aft from the crankshaft at wheel axle height. These shafts had universal joints and square sliding prismatic joints to accommodate the swiveling trucks. Each axle was driven by a separate bevel gear, with no side rods.

The strength of these engines lies in the fact that all wheels, including, in some engines, those under the tender, are driven so that all the weight develops tractive effort. A high ratio of piston strokes to wheel revolutions allowed them to run at partial slip, where a conventional rod engine would spin its drive wheels and burn rails, losing all traction.

Shay locomotives were often known as sidewinders or stemwinders for their side-mounted drive shafts. Most were built for use in the United States, but many were exported, to about 30 countries, either by Lima, or after they had reached the end of their usefulness in the US.

Classes

Approximately 2,770 Shay locomotives were built by Lima in four classes, from 6 to 160 short tons (5.4 to 142.9 long tons; 5.4 to 145.1 t), between 1878 and 1945.

Two 15 short tons (13 long tons; 14 t) Shays were built with two cylinders and three trucks.

Four Shays, 600 mm (1 ft 11+58 in) gauge, were built left-handed, all special ordered by the Sr. Octaviano B. Cabrera Co.,[10] San Luis de la Paz, Mexico.

Survivors

Shay "Leetonia No. 1" at the Railroad Museum of Pennsylvania
Anaconda Copper Mining Co. Shay No. 5 on static display by the Williams Depot

115 Shays survive today, some a combination of parts of two Shays.[11] This is a partial list:

Ely-Thomas Lumber Company No. 6 operating at New Jersey Museum of Transportation
Midwest Central Railroad Three-Truck Shay No. 9
Meadow River Lumber Co. No. 1
Cass Scenic Railway Shay No. 2 at Cass Station, WV

Images

References

  1. ^ Ephraim Shay, Locomotive-Engine, U.S. patent 242992A, June 14, 1881.
  2. ^ Ephraim Shay, Locomotive-Truck, U.S. patent 706604A, August 12, 1902.
  3. ^ "Shay" Locomotives at Work, The Locomotive, Vol XV, No. 198 (February 15, 1909); page 37.
  4. ^ Angus Sinclair, Development of the Locomotive Engine, New York, 1907; page 566.
  5. ^ H. C. Hammack, A Remarkable Locomotive -- Heaviest on Drivers in the World, Locomotive Engineers' Monthly Journal, Vol. XXXVII, No. 1 (Jan. 1903); page 51.
  6. ^ Lewis E. Feightner, Locomotive Crank-Shaft Bracket, U.S. patent 879617A, Feb. 18, 1908.
  7. ^ Lewis E. Feightner, Superheater for Locomotive Boilers, U.S. patent 939237A, Nov. 9, 1909.
  8. ^ Albert Claypoole, Geared Locomotive, U.S. patent 1622765A, Mar. 29, 1927.
  9. ^ a b Shay Geared Locomotives: Catalogue No. S-4. Lima, Ohio: Lima Locomotive Works. 1925.
  10. ^ Sr. Octaviano B. Cabrera Co.
  11. ^ "115 known Surviving Shays"
  12. ^ www.sierraloggingmuseum.org
  13. ^ "sn-3203". www.shaylocomotives.com. Retrieved 2022-03-26.
  14. ^ "Anaconda Mining Company #5 - www.rgusrail.com". www.rgusrail.com. Retrieved 2022-03-26.
  15. ^ "▶️ Historic locomotive in Prineville moving to Oregon Rail Heritage Foundation". Central Oregon Daily. 2022-09-02. Retrieved 2023-01-12.
  16. ^ H.L. Thomas, "Lima Reclaims Her Own," Trains magazine, December 1954
  17. ^ Bytown Railway Society
  18. ^ ShayLocomotives.com. "sn-3345" Archived 2012-07-05 at the Wayback Machine Accessed 2010-02-21.
  19. ^ Chappell, Gordon. "Meadow River Lumber Company No. 1". Steam Over Scranton: Special History Study, American Steam Locomotives. National Park Service. Retrieved March 13, 2012.
  20. ^ Cook, Roger; Zimmermann, Karl (1992). The Western Maryland Railway: Fireballs and Black Diamonds (2nd ed.). Laurys Station, PA: Garrigues House. ISBN 0-9620844-4-1. OCLC 26302871.
  21. ^ "Cass Scenic Railroad State Park". Cassrailroad.com. Retrieved 2016-12-24.
  22. ^ "The Museum". Littleriverrailroad.org. Archived from the original on August 12, 2001. Retrieved 2016-12-24.
  23. ^ "The Shay Locomotive Database". Retrieved 2019-05-21.
  24. ^ Lopez Sugar Corporation No. 10. June 13, 2022. Retrieved November 8, 2022.
  25. ^ a b "Steam Loco Shay". The White Mountain Central Railroad. 2013-07-19. Retrieved 2023-10-15.
  26. ^ "Locomotives in Lincoln". logginginlincoln. Retrieved 2023-10-15.

Sources