.348 Winchester
.348 Winchester
Type	Rifle
Place of origin	United States
Production history
Designer	Winchester
Produced	1936–present
Specifications
Parent case	.50-110 WCF
Case type	Rimmed, bottleneck
Bullet diameter	.348 in (8.8 mm)[1]
Land diameter	.340 in (8.6 mm)[1]
Neck diameter	.3785 in (9.61 mm)
Shoulder diameter	.485 in (12.3 mm)
Base diameter	.553 in (14.0 mm)
Rim diameter	.610 in (15.5 mm)
Rim thickness	.070 in (1.8 mm)
Case length	2.255 in (57.3 mm)
Overall length	2.795 in (71.0 mm)
Rifling twist	1 in 12
Primer type	Large rifle
Maximum pressure (CIP)	46,000 psi (320 MPa)
Maximum CUP	40,000[2] CUP
Ballistic performance
Bullet mass/type Velocity Energy 150 gr (10 g) 2,890 ft/s (880 m/s) 2,780 ft⋅lbf (3,770 J) 200 gr (13 g) 2,530 ft/s (770 m/s) 2,840 ft⋅lbf (3,850 J) 250 gr (16 g) 200 2,350 ft/s (720 m/s) 3,060 ft⋅lbf (4,150 J) 200 gr FTX 2,630 ft/s (800 m/s) 3,072 ft⋅lbf (4,165 J)
Test barrel length: 24

The .348 Winchester is an American rifle cartridge. It was introduced in 1936, and developed for the Winchester Model 71 lever action rifle. The .348 was one of the most powerful rimmed rounds ever used in a lever action rifle.^[3]

Performance

It is excellent for any North American big game in woods or brush, if the 250 grain bullet is used, but not especially suited to long range (400 yards and beyond) as a result of the need to use flat-nose slugs due to the Model 71's tubular magazine. Until Hornady's FTX flex tip pointed bullets, 300 yards with a good peep sight is a fairly easy shot (Factory-loaded, midrange trajectory at 200 yards (180 m) is 2.9 in (7.4 cm) for the 150-grain (9.7 g) bullet, 3.6 in (9.1 cm) for the 200-grain (13 g) round, and 4.4 in (11 cm) for the 250-grain (16 g) slug.) The 200-and-250-grain (13 and 16 g) loadings are preferred for anything past 100 yd (91 m).

In 1962, Winchester dropped the factory 150 gr and 250 gr loads, retaining only the 200 gr. No other rifle was ever offered in .348 by Winchester (although Uberti has made some 400 rifles chambered for the .348 in the Cimarron 1885 Hi-Wall in the mid-2000s), and it has been supplanted by the .358 Winchester (in the Model 88). (The Model 71 was discontinued in 1958.)

In 1987, Browning produced a modern version of the Model 71 in Japan.^{[citation needed]} These have different thread sizes in places, most notably the barrels, and many parts will not interchange with the originals. The Browning version was a limited production model only.^{[citation needed]}

The case of the .348 was used to produce the 8-348w wildcat, used to rechamber World War 1-era rifles such as Lebel or Berthier, instead of the original 8x50mmR, which at the time of such conversions were still considered war materiel in France and therefore strictly regulated.^{[citation needed]} The .348 is also the basis for the .348 Ackley Improved, The .348 Ackley improved has about a 200 fps advantage over the standard pushing the 200 grain FTX bullet at 2800 feet a second with some of the new hybrid powders. The .348 also served as the basis for the .50 Alaskan and .500 Linebaugh cartridges.^[4][5]

Dimensions

SAAMI rates the standard pressure of the cartridge at 40,000 CUP.^[6] The C.I.P rates the max standard pressure at a "Pmax = 3200 bar"^[7] or 46,412 psi.