Acton swing bridge | |
|---|---|
 | |
| Coordinates | 53°16′48″N 2°36′03″W / 53.279882°N 2.600702°W |
| Carries | Road traffic |
| Crosses | River Weaver |
| Locale | Cheshire, England |
| Characteristics | |
| Design | Swing truss bridge |
| Material | Steel |
| Total length | 83.5 metres (274 ft) |
| History | |
| Constructed by | John Arthur Saner (design) |
| Opened | 10 August 1933 |
| Location | |
 | |
The Acton swing bridge is a swing bridge spanning the River Weaver in the village of Acton Bridge in north Cheshire, England. First operated in 1933, it carries the A49 trunk road.
The bridge is 83.5 m long and 8 m high bowstring truss balanced swing bridge, based on an 1893 design by John Arthur Saner.[1][2] It has two slightly skew spans of 25 m each, with the twin riveted steel trusses supported on a mass concrete pontoon chamber.[2]
It was built in an open position between 1931 and 1933 at a cost of £52,000,[2] shutting for the first time on 10 August 1933.[3] The current bridge replaced an older stone bridge which had been able to carry only one line of traffic with an axle weight limit of 8 tons (the first bridge across the Weaver at this point was built in 1751).[3] The current bridge is approximately 100 m north (downstream) of the old bridge's abutments, visible on the river banks from the Leigh Arms car park.[4]
It has been subject to periodic strengthening (e.g. in 1987)[1] and repair (e.g. in 2015).[5] Today the structure of the bridge is maintained by the Canal & River Trust; Cheshire West and Chester Council is responsible for maintaining the A49 road which it carries.[5]
