Adsorption refrigeration was invented by Michael Faraday in 1821, even though the basis of artificial modern refrigeration dates back to 1748 with William Cullen's experiments.[1] Adsorption is sometimes referred to as solid sorption.[2]

It is very similar to absorption refrigeration (note that the second letter is different). The difference is that in adsorption refrigeration, the refrigerant or adsorbate vapour molecules adsorb onto the surface of a solid instead of dissolving into a liquid. In an adsorption system, an adsorber adsorbs the refrigerant vapour into a solid, while in an absorption system, an absorber absorbs the refrigerant vapour into a liquid.[1] Adsorption refrigeration also includes a generation process where refrigerant vapour molecules desorb from the solid. In this process, there is no use of CFCs or ammonia the thermally driven cooling process is environment friendly.[3]

The characteristics of the adsorbate/refrigerant pair is crucial in determining the system performance of an adsorption refrigeration system.[4][1] The typical system performance indicators for an adsorption refrigeration system are the coefficient of performance and the specific cooling effect.[4] The refrigerants used in absorption systems are ammonia, water, or methanol, etc, which all experience phase changes between the vapor and liquid states - the same as in vapor compression refrigeration; while the adsorbent is a solid, such as silica gel, activated carbon, or zeolite.[1] For example, an adsorption refrigeration device with active carbon fiber as the adsorbent and ammonia as the refrigerant was designed.[2]

Adsorption refrigeration has been extensively researched in recent years because the technology is often noiseless, non-corrosive and environmentally friendly.[5] The heat source for adsorption refrigeration can be fossil fuel, biomass fuel, nuclear fission, geothermal energy, waste heat, or solar thermal energy.[1]

Adsorption refrigerators are available in the marketplace and are mainly used to produce chilled water from waste heat. Gas adsorption heat pumps are not currently available in the UK, but are just being introduced in Europe as small water or ground source packaged units that provide domestic, low-temperature space heating.[6]

References

  1. ^ a b c d e R.E. Critoph, R.E. (2007). "Adsorption Refrigeration Research at Warwick" (PDF). warwick.ac.uk. Archived (PDF) from the original on 2021-01-16. Retrieved 2020-05-31.
  2. ^ a b Vasiliev, L. L; Mishkinis, D. A; Antukh, A. A; Vasiliev, L. L (2001-04-01). "Solar–gas solid sorption heat pump". Applied Thermal Engineering. 21 (5): 573–583. doi:10.1016/S1359-4311(00)00069-7. ISSN 1359-4311.
  3. ^ Hawaii Energy and Environmental Technologies (HEET) Initiative.
  4. ^ a b Rupam, Tahmid Hasan; Islam, Md. Amirul; Pal, Animesh; Saha, Bidyut Baran (2020-07-05). "Adsorption thermodynamics and performance indicators of selective adsorbent/refrigerant pairs". Applied Thermal Engineering. 175: 115361. doi:10.1016/j.applthermaleng.2020.115361. ISSN 1359-4311. S2CID 218777958.
  5. ^ Goyal, Parash; Baredar, Prashant; Mittal, Arvind; Siddiqui, Ameenur. R. (2016-01-01). "Adsorption refrigeration technology – An overview of theory and its solar energy applications". Renewable and Sustainable Energy Reviews. 53: 1389–1410. doi:10.1016/j.rser.2015.09.027. ISSN 1364-0321.
  6. ^ "Gas driven heat pumps" (PDF). London: Department for Business, Energy & Industrial Strategy. September 2016.
Category