Ammonium dinitramide
Names
IUPAC name
Ammonium dinitramide
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.126.585 Edit this at Wikidata
EC Number
  • 604-184-9
UNII
  • InChI=1S/N3O4.H3N/c4-2(5)1-3(6)7;/h;1H3/q-1;/p+1 checkY
    Key: BRUFJXUJQKYQHA-UHFFFAOYSA-O checkY
  • InChI=1/N3O4.H3N/c4-2(5)1-3(6)7;/h;1H3/q-1;/p+1
    Key: BRUFJXUJQKYQHA-IKLDFBCSAM
  • [NH4+].[N-]([N+](=O)[O-])[N+](=O)[O-]
Properties
H4N4O4
Molar mass 124.06 g/mol
Density 1.81 g/cm3
Melting point 93 °C (199 °F; 366 K)
Boiling point decomposes at 127 °C (261 °F; 400 K)
Hazards
GHS labelling:
GHS01: ExplosiveGHS02: FlammableGHS07: Exclamation markGHS08: Health hazard
Danger
H201, H228, H302, H371
P210, P230, P240, P241, P250, P260, P264, P270, P280, P301+P312, P309+P311, P330, P370+P378, P370+P380, P372, P373, P401, P405, P501
Thermochemistry
−150.6 kJ/mol
Explosive data
Shock sensitivity Low[1]
Friction sensitivity Low
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

Ammonium dinitramide (ADN) is the ammonium salt of dinitraminic acid. ADN decomposes under heat to leave only nitrogen, oxygen, and water. The ions are the ammonium ion NH4+ and the dinitramide N(NO2)2−.

It makes an excellent solid rocket oxidizer with a slightly higher specific impulse than ammonium perchlorate and more importantly, does not leave corrosive hydrogen chloride fumes. This property is also of military interest because halogen-free smoke is harder to detect. It decomposes into low-molecular-mass gases so it contributes to higher performance without creating excessive temperatures if used in gun or rocket propellants. However, the dinitramide salt is more prone to detonation under high temperatures and shock compared with the perchlorate.

The EURENCO Bofors company produced LMP-103S as a 1-to-1 substitute for hydrazine by dissolving 65% ammonium dinitramide, NH4N(NO2)2, in 35% water solution of methanol and ammonia. LMP-103S has 6% higher specific impulse and 30% higher impulse density than hydrazine monopropellant. Additionally, hydrazine is highly toxic and carcinogenic, while LMP-103S is only moderately toxic. LMP-103S is UN Class 1.4S allowing for transport on commercial aircraft, and was demonstrated on the Prisma satellite in 2010. Special handling is not required. LMP-103S could replace hydrazine as the most commonly used monopropellant.[2]

The ADN-based monopropellant FLP-106 is reported to have improved properties relative to LMP-103S, including higher performance (ISP of 259 s vs. 252 s) and density (1.362 g/cm3 vs. 1.240 g/cm3).[3]

History

Ammonium dinitramide was invented in 1971 at the Zelinskiy Institute of Organic Chemistry in the USSR. Initially all information related to this compound was classified because of its use as a rocket propellant, particularly in Topol-M intercontinental ballistic missiles. In 1989 ammonium dinitramide was independently synthesized at SRI International.[4] SRI obtained US and international patents for ADN in the mid-1990s, at which time scientists from the former Soviet Union revealed they had discovered ADN 18 years earlier.[4]

Preparation

There are at least 20 different synthesis routes that produce Ammonium dinitramide. In the laboratory ammonium dinitramide can be prepared by nitration of sulfamic acid or its salts at low temperatures.

KSO3NH2 + 2HNO3 → KHSO4 + NH4N(NO2)2 + H2O

The process is performed under red light, since the compound is decomposed by higher energy photons. The details of the synthesis remain classified. Other sources[who?] report ammonium synthesis from ammonium nitrate, anhydrous nitric acid, and fuming sulfuric acid containing 20% free sulfur trioxide AKA Oleum. A base other than ammonia must be added before the acid dinitramide decomposes. The final product is obtained by fractional crystallization.

Another synthesis known as the urethane synthesis method requires four synthesis steps and results in a yield of up to 60%. Ethyl carbamate is nitrated with nitric acid, and then reacted with ammonia to form the ammonium salt of N-nitrourethane. This is nitrated again with nitrogen pentoxide to form ethyl dinitrocarbamate and ammonium nitrate. Finally, treatment with ammonia again splits off the desired ammonium dinitramide and regenerates the urethane starting material. [5]

CH3CH2OC(O)NH2 + HNO3 → CH3CH2OC(O)NHNO2 + H2O
CH3CH2OC(O)NHNO2 + NH3 → CH3CH2OC(O)NNO2NH4
CH3CH2OC(O)NNO2NH4 + N2O5 → CH3CH2OC(O)N(NO2)2 + NH4NO3
CH3CH2OC(O)N(NO2)2 + 2NH3 → CH3CH2OC(O)NH2 + NH4N(NO2)2

References

  1. ^ Östmark, H.; Bemm, U.; Langlet, A.; Sandén, R.; Wingborg, N. (1 June 2000). "The properties of ammonium dinitramide (ADN): Part 1, basic properties and spectroscopic data". Journal of Energetic Materials. 18 (2–3): 123–138. Bibcode:2000JEnM...18..123O. doi:10.1080/07370650008216116. ISSN 0737-0652. S2CID 94304770.
  2. ^ Swedish Space Corporation Group, Monopropellant LMP-103S, 2011, www.ecap.se[full citation needed]
  3. ^ Anders Larsson; Niklas Wingborg. "Green Propellants Based on Ammonium Dinitramide (ADN)" (PDF). Retrieved 21 July 2020.
  4. ^ a b "Dinitramide Salts: ADN Plus Other Salts". SRI International. Archived from the original on 2012-05-26. Retrieved 2012-04-15.
  5. ^ US 5714714, Stern, Alfred G.; Koppes, William M. & Sitzmann, Michael E. et al., "Process for preparing ammonium dinitramide", published 1998-02-03, assigned to USA, Secretary of the Navy 

Further reading

This article includes a list of general references, but it lacks sufficient corresponding inline citations. Please help to improve this article by introducing more precise citations. (February 2012) (Learn how and when to remove this template message)
Categories