This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages) The lead section of this article may need to be rewritten. Use the lead layout guide to ensure the section follows Wikipedia's norms and is inclusive of all essential details. (July 2014) (Learn how and when to remove this template message) This section may be too technical for most readers to understand. Please help improve it to make it understandable to non-experts, without removing the technical details. (May 2011) (Learn how and when to remove this template message) (Learn how and when to remove this template message)

In carbohydrate chemistry, a pair of anomers (from Greek ἄνω 'up, above', and μέρος 'part') is a pair of near-identical stereoisomers that differ at only the anomeric carbon, the carbon that bears the aldehyde or ketone functional group in the sugar's open-chain form. However, in order for anomers to exist, the sugar must be in its cyclic form, since in open-chain form, the anomeric carbon is planar and thus achiral. More formally stated, then, an anomer is an epimer at the hemiacetal/hemiketal carbon in a cyclic saccharide.[1] Anomerization is the process of conversion of one anomer to the other. As is typical for stereoisomeric compounds, different anomers have different physical properties, melting points and specific rotations.

Nomenclature

Different projections of  α-D-glucopyranose. 1 = Fischer projection with C-1 at the top the anomeric centre. C-5 is the anomeric reference atom. 2, 3 = Haworth projections. 4 = Mills projection.
Different projections of α-D-glucopyranose. 1 = Fischer projection with C-1 at the top the anomeric centre. C-5 is the anomeric reference atom. 2, 3 = Haworth projections. 4 = Mills projection.

Two anomers are designated alpha (α) or beta (β), according to the configurational relationship between the anomeric centre and the anomeric reference atom, hence they are relative stereodescriptors.[2] The anomeric centre in hemiacetals is the anomeric carbon C-1; in hemiketals, it is the carbon derived from the carbonyl of the ketone (e.g. C-2 in D-fructose). In aldohexoses the anomeric reference atom is the stereocenter that is farthest from anomeric carbon in the ring (the configurational atom, defining the sugar as D or L). For example, in α-D-glucopyranose the reference atom is C-5.

If in the cyclic Fischer projection[3] the exocyclic oxygen atom at the anomeric centre is cis (on the same side) to the exocyclic oxygen attached to the anomeric reference atom (in the OH group) the anomer is α. If the two oxygens are trans (on different sides) the anomer is β.[4] Thus, the absolute configurations of the anomeric carbon and the reference atom are the same (both R or both S) in the α anomer and opposite (one R and the other S) in the β anomer.[5]

Anomerization

Anomerization is the process of conversion of one anomer to the other. For reducing sugars, anomerization is referred to as mutarotation and occurs readily in solution and is catalyzed by acid and base. This reversible process typically leads to an anomeric mixture in which eventually an equilibrium is reached between the two single anomers.

The ratio of the two anomers is specific for the regarding sugar. For example, regardless of the configuration of the starting D-glucose, a solution will gradually move towards being a mixture of approximately 64% β-D-glucopyranoside and 36% of α-D-glucopyranose. As the ratio changes, the optical rotation of the mixture changes; this phenomenon is called mutarotation.

Mechanism of anomerization

Open-chain form as an intermediate product between α and β anomer
Open-chain form as an intermediate product between α and β anomer
Open-chain form of D-galactose
Open-chain form of D-galactose

Though the cyclic forms of sugars are usually heavily favoured, hemiacetals in aqueous solution are in equilibrium with their open-chain forms. In aldohexoses this equilibrium is established as the hemiacetal bond between C-1 (the carbon bound to two oxygens) and C-5 oxygen is cleaved (forming the open-chain compound) and reformed (forming the cyclic compound). When the hemiacetal group is reformed, the OH group on C-5 may attack either of the two stereochemically distinct sides of the aldehyde group on C-1. Which side it attacks on determines whether the α- or β-anomer is formed.

Anomerization of glycosides typically occurs under acidic conditions. Typically, anomerization occurs through protonation of the exocyclic acetal oxygen, ionization to form an oxocarbenium ion with release of an alcohol, and nucleophilic attack by an alcohol on the reverse face of the oxocarbenium ion, followed by deprotonation.

Physical properties and stability

Anomers are different in structure, and thus have different stabilizing and destabilizing effects from each other. The major contributors to the stability of a certain anomer are:

For D-glucopyranoside, the β-anomer is the more stable anomer in water. For D-mannopyranose, the α-anomer is the more stable anomer.

Because anomers are diastereomers of each other, they often differ in physical and chemical properties. One of the most important physical properties that is used to study anomers is the specific rotation, which can be monitored by polarimetry.

See also

References

  1. ^ Francis Carey (2000). Organic Chemistry, McGraw-Hill Higher Education press (4th ed.).
  2. ^ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "α (alpha), β (beta)". doi:10.1351/goldbook.A00003
  3. ^ "Chemistry - Queen Mary University of London".
  4. ^ Nomenclature of Carbohydrates (Recommendations 1996) Archived 2010-10-27 at the Wayback Machine  PDF
  5. ^ "Structural Basis of Glycan Diversity". Essentials of Glycobiology. Cold Spring Harbor Laboratory Press. 2009. ISBN 9780879697709.