You do not have permission to edit this page, for the following reasons:

This IP address has been blocked from editing Wikipedia.
This does not affect your ability to read Wikipedia pages.
Most people who see this message have done nothing wrong. Some kinds of blocks restrict editing from specific service providers or telecom companies in response to recent abuse or vandalism, and can sometimes affect other users who are unrelated to that abuse. Review the information below for assistance if you do not believe that you have done anything wrong.

The IP address or range 3.85.0.0/16 has been blocked (disabled) by ‪ST47‬ for the following reason(s):

The IP address that you are currently using has been blocked because it is believed to be a web host provider. To prevent abuse, web hosts may be blocked from editing Wikipedia.
You will not be able to edit Wikipedia using a web host provider because it hides your IP address, much like a proxy or VPN.
We recommend that you attempt to use another connection to edit. For example, if you use a proxy or VPN to connect to the internet, turn it off when editing Wikipedia. If you edit using a mobile connection, try using a Wi-Fi connection, and vice versa. If you are using a corporate internet connection, switch to a different Wi-Fi network. If you have a Wikipedia account, please log in.
If you do not have any other way to edit Wikipedia, you will need to request an IP block exemption.

How to appeal if you are confident that your connection does not use a web host's IP address:
If you are confident that you are not using a web host, you may appeal this block by adding the following text on your talk page: ((unblock|reason=Caught by a web host block but this host or IP is not a web host. My IP address is _______. Place any further information here. ~~~~)). You must fill in the blank with your IP address for this block to be investigated. Your IP address can be determined here. Alternatively, if you wish to keep your IP address private you can use the unblock ticket request system. There are several reasons you might be editing using the IP address of a web host (such as if you are using VPN software or a business network); please use this method of appeal only if you think your IP address is in fact not a web host.

Administrators: The IP block exemption user right should only be applied to allow users to edit using web host in exceptional circumstances, and they should usually be directed to the functionaries team via email. If you intend to give the IPBE user right, a CheckUser needs to take a look at the account. This can be requested most easily at SPI Quick Checkuser Requests. Unblocking an IP or IP range with this template is highly discouraged without at least contacting the blocking administrator.

This block will expire on 21:48, 22 February 2026.

Even when blocked, you will usually still be able to edit your user talk page, as well as email administrators and other editors.

For information on how to proceed, please read the FAQ for blocked users and the guideline on block appeals. The guide to appealing blocks may also be helpful.

Other useful links: Blocking policy · Help:I have been blocked
Your IP address is in a range that has been blocked on all Wikimedia Foundation wikis. The block was made by ‪Jon Kolbert‬. The reason given is Open proxy/Webhost: See the help page if you are affected .
- Start of block: 05:35, 21 February 2024
- Expiry of block: 05:35, 21 February 2029
Your current IP address is 3.85.235.113. The blocked range is 3.85.0.0/16. Please include all above details in any queries you make. If you believe you were blocked by mistake, you can find additional information and instructions in the No open proxies global policy. Otherwise, to discuss the block please post a request for review on Meta-Wiki. You could also send an email to the stewards VRT queue at stewards@wikimedia.org including all above details.

You can view and copy the source of this page:

((Short description|Path an audio signal takes from source to output))
((More citations needed|date=June 2020))
'''Audio signal flow''' is the path an [[sound|audio]] signal takes from source to output.<ref>((cite book | title = Pro Tools 6 for Macintosh and Windows | author= Steven Roback | edition = 2nd | publisher = Peachpit Press | year = 2004 | isbn = 978-0-321-21315-0 | page = [https://archive.org/details/protools6formaci00roba/page/303 303]  | url = https://archive.org/details/protools6formaci00roba | url-access = registration | quote = audio signal flow. ))</ref> The concept of audio signal flow is closely related to the concept of audio gain staging; each component in the signal flow can be thought of as a [[gain stage]].

In typical home stereo systems, the signal flow is usually short and simple, with only a few components. However, in recording studios and performance venues, the signal flow can often be quite complicated, with a large number of components, each of which may cause the signal to fail to reach its desired output. Knowing each component in the signal flow becomes increasingly difficult and important as system size and complexity increases.

== Feedback ==

Feedback, also called "Howl-Round," occurs when the output of a device is accidentally connected to its input. If the device is amplifying the signal, then the amplified output will be fed back into the input, where it will be amplified again and sent to the output, where it will return to the input, be amplified again, and sent to the output, ad infinitum. An understanding of signal flow is important in preventing feedback.

== CD playback example ==

The following example will trace the signal flow of a typical home stereo system while playing back an audio CD.

The first component in the signal flow is the CD player, which produces the signal. The output of the CD player is connected to an input on a receiver. In a typical home stereo system, this connection will be analog and unbalanced at consumer line-level of -10dBV using RCA connectors. By selecting the proper input on the receiver, the signal is routed internally to an amplifier which boosts the signal voltage from line-level to the voltage required by the speakers. The output of the amplifier is then connected to speakers, which convert the electrical signal into acoustical sound.

== Single vocalist recording signal flow example ==
The exact series of elements in a signal flow will vary from system to system. The following example depicts a typical signal flow for recording a vocalist in a recording studio.

[[File:Singer Signal Flow Example.png|thumb|center|550px|Singer Signal Flow Example]]

The first element in the signal flow is the vocalist, which produces the signal. This signal propagates acoustically to the microphone according to the [[Inverse-square law]], where it is converted by a transducer into an electrical signal. Other objects may also produce sound in the acoustical environment, such as [[HVAC]] systems, computer fans, traffic noise, elevators, plumbing, etc. These noise sources can also be picked up by the microphone. It is therefore important to optimize the acoustical signal/noise ratio at the microphone. This can be accomplished by reducing the amplitude of unwanted noise (for example, turning off the HVAC system while recording), or by taking advantage of the inverse-square law; by moving the microphone closer to the signal source and farther away from any noise sources, the signal/noise ratio is increased.

After the microphone, the signal passes down a cable to the microphone preamplifier, which amplifies the microphone signal to line level. This is important because a line-level signal is necessary to drive the input circuitry of any further processing equipment down the chain, which will generally not be able to accept the extremely low-voltage signal produced by a typical microphone.


For the purposes of this example, the output of the microphone preamplifier is then sent to an EQ, where the timbre of the sound may be manipulated for artistic or technical purposes. Examples of artistic purposes include making the singer sound "brighter," "darker," "more forward," "less nasal," etc. Examples of technical purposes include reducing unwanted low-frequency rumble from HVAC systems, compensating for high-frequency loss caused by distant microphone placement, etc.

The output of the EQ will then be sent to a compressor, which is a device that manipulates the dynamic range of a signal for either artistic or technical reasons.

The output of the compressor is then sent to an analog-to-digital converter, which converts the signal to a digital format, allowing the signal to be sent to a [[digital recording]] device, such as a computer.

== Vocalist live sound signal flow example ==

The following example traces the signal flow of a vocalist performing in a church.

The signal flow begins as in the previous example; singer, microphone, microphone preamplifier, EQ, and compressor. For this example, this signal then flows into a mixing board, which allows the signal to be routed to various outputs. The mixing board includes facilities for a main mix bus, which we will send to the house sound system, a monitor mix bus, which we will use to create a monitor mix for the singer, and an auxiliary mix bus, which we will use to create a second mix to be sent to the lobby and nursery.

== Band signal flow example ==

[[File:Band Signal Flow Example.png|thumb|center|550px|A diagram of a typical signal flow for a band]]

== Broadcast performance signal flow example ==

In this example, we will explore the signal flow of a hypothetical rock concert. For our example, this concert not only has a live audience, it is also being broadcast on live TV, and it is being recorded, with copies of the recording being sold to the public immediately after the concert is over. The signal from each microphone is therefore being sent to five places; the house sound system, the in-ear monitor system for the performers, the broadcast system, the recording system, and to the lobby, restrooms, and backstage areas so that people can hear the performance while outside the performance area.

[[File:Broadcast Example Overview.jpg|thumb|center|550px|Overview diagram of Signal Flow for this example.]]

The house sound system will be controlled from the "Front of House" position, also called the "Mix position." This position is usually located behind the audience.

[[File:View from Front of House.jpg|thumb|none|The view from the Front of House Position.]]

The in-ear monitor system will be controlled by a monitor mix engineer located in the wing on one side of the stage. It is necessary that the monitor mix engineer be able to communicate with the performers, so being in close proximity to them is essential. The monitor mix position is often called "monitor world."

[[File:Dunkys monitor world at Soundwave 2010.jpg|thumb|none|An example of a monitor mix position]]

The broadcast mix will be controlled from a broadcast truck, located in the parking lot behind the performance venue.

[[File:Arena_OB7.JPG|Arena Television OB8 working for the BBC at Wimbledon Tennis Championships, UK|thumb]]

The recording system will be located in another truck, located next to the broadcast truck.

For this example, the lobby, restroom, and backstage mix will be controlled by an assistant stage manager from backstage.

[[File:Stage managers panel.jpg|thumb|none|Stage managers panel]]

To facilitate this 5-way split, a device called a [[microphone splitter]] will be used. The microphone splitter serves several purposes; it will split the signal 5-ways, provide phantom power for condenser microphones and active DI boxes, and it will provide isolation between the 5 outputs, preventing ground loops. Preventing ground loops is an extremely important function, as the severity of ground loops typically increases with distance. In a large network of interconnected sound systems, such as the one in this example, ground loops could become dangerously severe. Isolation to prevent ground loops is therefore vitally important.

[[File:Microphone Splitter.jpg|thumb|none|An example of a microphone splitter]]

Let's begin by tracing the signal path from the splitter to the audience. The signal leaves the splitter, typically via an [[Audio multicore cable]], and travels to the Front of House position. Here, the still-mic-level signal enters into a microphone preamplifier, which boosts the signal voltage to line level. For this example, the microphone preamplifier is built into a mixing board. It is typical for a mixing board to include a line trim after the preamplifier. This allows the amplitude of the now line-level signal to be adjusted. This may be done for artistic or technical reasons. A typical application for the line trim is attenuating signals that were intentionally amplified too much by the microphone preamplifier. Over amplifying the signal can cause the preamplifier to distort, which can under certain circumstances produce a desirable sound.

After the line trim, the signal is processed by the mixing board's EQ, filter, compressor, limiter, de-esser, delay, reverb, and any other signal processing features the mixing board has available and that the mix engineer chooses to use. The processed signal is then sent to the mix bus, where it is combined with all the other signals coming from the stage. The balance of signals is controlled by faders.

The mix is then routed to one of the mixing boards outputs, and flows into a loudspeaker controller. This device processes the signal to optimize it for the sound system installed in the performance venue. It then flows into a rack of amplifiers, and then to the speakers.

==See also==
*[[Gain stage]]
*[[Reverb]]
*[[Microphone splitter]]

== Notes ==
((reflist))

((DEFAULTSORT:Signal Flow))
[[Category:Audio engineering]]

Pages transcluded onto the current version of this page (help):

Audio signal flow (edit)
Template:Ambox (view source) (template editor protected)
Template:Cite book (view source) (protected)
Template:Find sources mainspace (view source) (template editor protected)
Template:Main other (view source) (protected)
Template:More citations needed (view source) (template editor protected)
Template:Pagetype (view source) (protected)
Template:Reflist (view source) (protected)
Template:Reflist/styles.css (view source) (protected)
Template:SDcat (view source) (protected)
Template:Short description (view source) (protected)
Template:Short description/lowercasecheck (view source) (protected)
Module:Arguments (view source) (protected)
Module:Category handler (view source) (protected)
Module:Category handler/blacklist (view source) (protected)
Module:Category handler/config (view source) (protected)
Module:Category handler/data (view source) (protected)
Module:Category handler/shared (view source) (protected)
Module:Check for unknown parameters (view source) (protected)
Module:Citation/CS1 (view source) (protected)
Module:Citation/CS1/COinS (view source) (protected)
Module:Citation/CS1/Configuration (view source) (protected)
Module:Citation/CS1/Date validation (view source) (protected)
Module:Citation/CS1/Identifiers (view source) (protected)
Module:Citation/CS1/Utilities (view source) (protected)
Module:Citation/CS1/Whitelist (view source) (protected)
Module:Citation/CS1/styles.css (view source) (protected)
Module:Disambiguation/templates (view source) (protected)
Module:Find sources (view source) (template editor protected)
Module:Find sources/config (view source) (template editor protected)
Module:Find sources/links (view source) (template editor protected)
Module:Find sources/templates/Find sources mainspace (view source) (template editor protected)
Module:Message box (view source) (protected)
Module:Message box/ambox.css (view source) (protected)
Module:Message box/configuration (view source) (protected)
Module:Namespace detect/config (view source) (protected)
Module:Namespace detect/data (view source) (protected)
Module:Pagetype (view source) (protected)
Module:Pagetype/config (view source) (protected)
Module:Pagetype/disambiguation (view source) (protected)
Module:Pagetype/setindex (view source) (protected)
Module:Pagetype/softredirect (view source) (protected)
Module:SDcat (view source) (protected)
Module:String (view source) (protected)
Module:Unsubst (view source) (protected)
Module:Wikitext Parsing (view source) (protected)
Module:Yesno (view source) (protected)

Return to Audio signal flow.

Retrieved from "https://en.wikipedia.org/wiki/Audio_signal_flow"