This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages)
This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.Find sources: "Bead sort" – news · newspapers · books · scholar · JSTOR (October 2017) (Learn how and when to remove this message)The topic of this article may not meet Wikipedia's general notability guideline. Please help to demonstrate the notability of the topic by citing reliable secondary sources that are independent of the topic and provide significant coverage of it beyond a mere trivial mention. If notability cannot be shown, the article is likely to be merged, redirected, or deleted.Find sources: "Bead sort" – news · newspapers · books · scholar · JSTOR (October 2017) (Learn how and when to remove this message)
(Learn how and when to remove this message)

**Bead sort**, also called **gravity sort**, is a natural sorting algorithm, developed by Joshua J. Arulanandham, Cristian S. Calude and Michael J. Dinneen in 2002, and published in *The Bulletin of the European Association for Theoretical Computer Science*.^{[1]} Both digital and analog hardware implementations of bead sort can achieve a sorting time of *O*(*n*); however, the implementation of this algorithm tends to be significantly slower in software and can only be used to sort lists of positive integers. Also, it would seem that even in the best case, the algorithm requires *O*(*n ^{2}*) space.

The bead sort operation can be compared to the manner in which beads slide on parallel poles, such as on an abacus. However, each pole may have a distinct number of beads. Initially, it may be helpful to imagine the beads suspended on vertical poles. In Step 1, such an arrangement is displayed using *n=5* rows of beads on *m=4* vertical poles. The numbers to the right of each row indicate the number that the row in question represents; rows 1 and 2 are representing the positive integer 3 (because they each contain three beads) while the top row represents the positive integer 2 (as it only contains two beads).^{[notes 1]}

If we then allow the beads to fall, the rows now represent the same integers in sorted order. Row 1 contains the largest number in the set, while row *n* contains the smallest. If the above-mentioned convention of rows containing a series of beads on poles 1..*k* and leaving poles *k*+1..*m* empty has been followed, it will continue to be the case here.

The action of allowing the beads to "fall" in our physical example has allowed the larger values from the higher rows to propagate to the lower rows. If the value represented by row *a* is smaller than the value contained in row *a+1*, some of the beads from row *a+1* will fall into row *a*; this is certain to happen, as row *a* does not contain beads in those positions to stop the beads from row *a+1* from falling.

The mechanism underlying bead sort is similar to that behind counting sort; the number of beads on each pole corresponds to the number of elements with value equal or greater than the index of that pole.

Bead sort can be implemented with four general levels of complexity, among others:

*O*(1): The beads are all moved simultaneously in the same time unit, as would be the case with the simple physical example above. This is an abstract complexity, and cannot be implemented in practice.*O*(): In a realistic physical model that uses gravity, the time it takes to let the beads fall is proportional to the square root of the maximum height, which is proportional to n.*O*(n): The beads are moved one row at a time. This is the case used in the analog and digital hardware solutions.*O*(S), where S is the sum of the integers in the input set: Each bead is moved individually. This is the case when bead sort is implemented without a mechanism to assist in finding empty spaces below the beads, such as in software implementations.

Like the Pigeonhole sort, bead sort is unusual in that in worst case it can perform faster than *O*(*n* log *n*), the fastest performance possible for a comparison sort in worst case. This is possible because the key for a bead sort is always a positive integer and bead sort exploits its structure.

This implementation is written in Python; it is assumed that the `input_list`

will be a sequence of integers. The function returns a new list rather than mutating the one passed in, but it can be trivially modified to operate in place efficiently.

```
def beadsort(input_list):
"""Bead sort."""
return_list = []
# Initialize a 'transposed list' to contain as many elements as
# the maximum value of the input -- in effect, taking the 'tallest'
# column of input beads and laying it out flat
transposed_list = [0] * max(input_list)
for num in input_list:
# For each element (each 'column of beads') of the input list,
# 'lay the beads flat' by incrementing as many elements of the
# transposed list as the column is tall.
# These will accumulate atop previous additions.
transposed_list[:num] = [n + 1 for n in transposed_list[:num]]
# We've now dropped the beads. To de-transpose, we count the
# 'bottommost row' of dropped beads, then mimic removing this
# row by subtracting 1 from each 'column' of the transposed list.
# When a column does not reach high enough for the current row,
# its value in transposed_list will be <= 0.
for i in range(len(input_list)):
# Counting values > i is how we tell how many beads are in the
# current 'bottommost row'. Note that Python's bools can be
# evaluated as integers; True == 1 and False == 0.
return_list.append(sum(n > i for n in transposed_list))
# The resulting list is sorted in descending order
return return_list
```

We can also implement the algorithm using Java.^{[2]}

```
public static void beadSort(int[] a)
{
// Find the maximum element
int max = a[0];
for (int i = 1; i < a.length; i++) {
if (a[i] > max) {
max = a[i];
}
}
// allocating memory
int[][] beads = new int[a.length][max];
// mark the beads
for (int i = 0; i < a.length; i++) {
for (int j = 0; j < a[i]; j++) {
beads[i][j] = 1;
}
}
// move down the beads
for (int j = 0; j < max; j++) {
int sum = 0;
for (int i = 0; i < a.length; i++) {
sum += beads[i][j];
beads[i][j] = 0;
}
for (int i = a.length - 1; i >= a.length - sum;
i--) {
a[i] = j + 1;
}
}
}
```