This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.Find sources: "Body jewelry sizes" – news · newspapers · books · scholar · JSTOR (January 2021) (Learn how and when to remove this template message)

Body jewelry sizes express the thickness of an item of body jewelry, using one of several possible systems.

## Background

Items of body piercing jewelry have an important common factor: the diameter of the part of the item of jewelry where it will rest in the piercing site. With the wearing of European-traditional kinds of earrings, that thickness is not an issue, because jewelry is made to use only thin wire for support, and the wearer need only have a narrow piercing hole to accommodate it. But with body jewelry, there is a wide variety of possible sizes, and wearers generally want jewelry that is the same size as their piercing site. Some wearers want increasingly larger sizes to deliberately stretch the hole. So that wearers can choose the size they want, there are standards for body jewelry sizes, used by jewelry makers and sellers.

Generally, the system of gauge-and-inches is used: In gauge notation, jewelry less than 12″ thick is typically measured in a system originally devised for measuring wire thickness. A gauge number denotes a thickness on a standardized scale which, for most purposes, starts at 20g (0.812 mm thick— often used for the posts for nose studs), and increases in thickness (as the gauge number decreases) to 0g, then 00g, and rarely goes any further as these thicknesses come closer and closer to 12″. From there, sizes of 12″ and thicker are always specified in fractions of an inch. (But note that sizes thinner than 12″ are also sometimes specified as fractions of an inch; see the Conversion Table to see how these interleave with gauges.)

Even though the gauge system was originally meant for wire, it is now used regardless of whether an item of body jewelry is an actual wire, or is instead a wooden plug, a plastic ring, or any other material.

The alternative to using the gauge-and-inches system is to specify the thickness in millimeters.

## Conversion table

 Further information: American wire gauge § Tables of AWG wire sizes
gauge
(AWG)
diameter
inches
fractional
inches
decimal
millimeters
20 ·    0.0320 0.812
18 ·    0.0403 1.024
16 ·    0.0508 1.291
·    116 0.0625 1.588
14 ·    0.0641 1.628
12 ·    0.0808 2.05
10 ·    0.1019 2.58
·    18 0.1250 3.18
8 ·    0.1285 3.26
6 ·    0.1620 4.12
·    316 0.1875 4.76
4 ·    0.204 5.19
·    14 0.250 6.35
2 ·    0.258 6.54
·    516 0.312 7.94
0 ·    0.325 8.25
00 ·    0.365 9.27
·    38 0.375 9.52
000 ·    0.410 10.40
·    716 0.438 11.11
0000 ·    0.460 11.68
·    12 0.500 12.70
·    916 0.562 14.29
·    58 0.625 15.88
·    1116 0.688 17.46
·    34 0.750 19.05
·    1316 0.812 20.6
·    78 0.875 22.2
·    1516 0.938 23.8
·    1 1.000 25.4
·    1+116 1.062 27.0
·    1+18 1.125 28.6
·    1+316 1.188 30.2
·    1+14 1.250 31.8
·    1+516 1.312 33.3
·    1+38 1.375 34.9
·    1+716 1.438 36.5
·    1+12 1.500 38.1
·    1+916 1.562 39.7
·    1+58 1.625 41.3
·    1+1116 1.688 42.9
·    1+34 1.750 44.4
·    1+1316 1.812 46.0
·    1+78 1.875 47.6
·    1+1516 1.938 49.2
·    2 2.000 50.8

## Usage of the systems

Some jewelry makers or sellers who express the size of their jewelry in millimeters, may also list the nearest approximate gauge-and-inches measurements for each item.[1] Using millimeters as the primary notation is most common in Europe and Australia.

## Units and notation

Discussions of gauge in this article use the American Wire Gauge (AWG) scale. Some jewelry may still use the obsolete and significantly different Standard Wire Gauge (SWG) scale instead[example needed]. Both AWG and SWG express sizes as a gauge, but the numbers are different. For example, AWG 12g is 2.1 mm, but SWG 12g is 2.6 mm. AWG 8g happens to be the same as SWG 10g. AWG 000g is 10.4 mm, but SWG 000g is 9.4 mm.

In most discussions of body jewelry, sizes are specified by giving the gauge, usually abbreviated by the suffix "g", the same symbol as used for grams: "12g". The article American Wire Gauge system, section "Nomenclature and abbreviations in electrical distribution" shows other notations for gauge, but most are rarely used for expressing body jewelry sizes, except "ga." as in "12 ga.", which is used occasionally.