Next Thing Co. was an Oakland, California, based start-up company founded in 2013 by Dave Rauchwerk, Gustavo Huber and Thomas Deckert.[8] NTC initially launched CHIP computer via a successful Kickstarter campaign in May 2015. The campaign started with a goal of US$50,000, and ended with 39,560 backers pledging US$2,071,927.[5]
Next Thing began shipping alpha boards to "Kernel Hacker" backers on September 25, 2015.[9] First customer shipping (for Kickstarter backers) began by May 31, 2016.[1][10]Pre-order opened by December 2015.[11] Pre-order for the original CHIP had stopped by April 4, 2017, as the line was discontinued.[12]
Next Thing Co. insolvency
By March 2018, Next Thing Co. had entered insolvency. Many customers still had not received their pre-orders.[13]
Models
CHIP board, front side
CHIP
CHIP board, rear side
CHIP was the original board, mostly targeting hobbyists. The system is built around the Allwinner R8SoC processor, which integrates an ARM Cortex-A8 CPU (based on ARM architecture V7-A) and peripherals, such as Graphic Engine, UART, SPI, USB ports, CIR, CMOS Sensor Interface and LCD controller.[14] The CPU is also accompanied by a NEON SIMD coprocessor and has RCT JAVA-Accelerations to optimize just-in-time (JIT) and dynamic adaptive compilation (DAC). There is also an ARM Mali-400 GPU, and a H263, H264 and vp8 hardware video decoder in the R8.[15]
CHIP was upgraded in April 2017 in anticipation of the CHIP Pro to "share a large number of the same components".[12]
CHIP Pro is similar to the original CHIP board, but uses the newer GR8 version of the chip. It is a system in package (SiP) made by Next Thing Co. It features a 1GHz Allwinner R8 ARMv7 Cortex-A8 processor with NEON SIMD extensions and a Mali-400 GPU. 256MB of Nanya Technology DDR3 SDRAM is combined with the R8 SoC into a 14mm × 14mm, 0.8mm-pitch 252-ball FBGA package, simplifying the routing of connections. Instead of having two dual-line 40-pin sockets as on CHIP, it implements castellated edges where the pin holes are designed and optimized to embed to another board with SMT.[22] Most of the CHIP's hardware features are also included in this model.
CHIP "v2" (unreleased)
Few details were available in regard to CHIP's would-be successor or successors except it would have used Next Thing's own SiP GR8 instead of Allwinner's original R8. In addition to feature-sharing with CHIP Pro, the company wanted to "take advantage of CHIP Pro's much more stable supply chain"[12] in order to address the uneasiness in its user base about the future of the product.[23] In responding to user concerns, Next Thing also disclosed that more than one successor product line was in the works.[24]
As Next Thing Co. entered insolvency with its assets and intellectual properties being sold,[13] release of "v2" is improbable.
Hardware extensions
In addition to open-source hardware and software, Next Thing also published an HPI and an API for users to develop add-ons boards called "DIP" [25] The company produced several DIPs including the Pocket CHIP.
Pocket CHIP and Pockulus
A PocketCHIP.
Pocket CHIP included a CHIP, a case with a 4.3 inch 480×272 pixel resistive touchscreen, a clicky keyboard, GPIO headers on the top of the device, GPIO soldering pads inside of the injection molded case, and a 5-hour battery. Following DIP specifications, the CHIP snaped into the case with no "screws or glues" creating a portable computer. On the lower right corner of the Pocket CHIP was a hexagonal hole that takes a standard #2 HB pencil. Inserting the pencil created a stand that allowed the Pocket CHIP to stand upright on a desk. Likewise, on the lower left is a circular hole for a pen.
PocketCHIP came loaded with a special edition of CHIP OS that included the DIP's driver and a couple of additional applications, including a special version of video game console virtual machine PICO-8, a fully functional Linux terminal, a file browser, a terminal based web browser called surf, and modular synthesizer SunVox.
For users who did not want to use the small screen in Pocket CHIP and also did not want to use the built-in composite TV output, Next Thing sold a VGA DIP[26] and an HDMI DIP.[27] Unlike Pocket CHIP, physical dimensions of these DIPs are similar to CHIP, so the snapped assembly looks like a thicker CHIP.
Media coverage and user community
CHIP received favorable reviews, and constant comparisons to Raspberry Pi. Laura Sydell of NPR asked if the device could "spark a new wave of tinkering and innovation", noting it was also open source hardware.[28] Marco della Cava of USA Today said that the device "represent[s] opportunities to both close the technology gap in developing and developed countries alike, while encouraging children to learn coding, due to their approachable design".[29]
Reviewers also noted its low price. Bo Moore of PC Gamer said the price of CHIP "[puts] Raspberry Pi 2 to shame",[30] and Ian Paul of PCWorld said it made "Raspberry Pi's price seem luxurious".[31] Within days of the launch of its Kickstarter, US national media outlets like The Washington Post and Time followed with glowing coverage.[32][33] Even Fortune joined the chorus with headline "This $9 computer could change the economics of building hardware."[34]
Since its alpha shipping, CHIP has attracted an enthusiastic user base, communicating mainly on NTC's bulletin board system (BBS). At the time of NTC's demise, the BBS had over 10,000 users, with hundreds of active users and hundreds of postings every month, to a total of over 100,000.[35]
Despite enthusiasm from reviewers and users, Next Thing Co. declared bankruptcy in March 2018, leaving many pre-order customers with undelivered orders.[13]
Archives and continuing support
While NTC has published many of its hardware and software repositories on GitHub, surviving users also launched an effort in order to preserve useful document, software, and other artifacts by leveraging the Internet Archive (a.k.a. archive.org). One effort is led by a user who has never received his preordered CHIP.[36] Another user set up a standalone site focusing on binary packages and a Git repository.[37]
In addition, the community also has a Wiki site that is independent of NTC.[38] However, as of 2021, the website ceased to function. The original content is however available in the Internet Archive snapshot[39] from November 2020.
^ abThe original specification from NTC's Kickstarter campaign is 4 GB. With 4.4.13, Next Thing announced "new C.H.I.P. software will double the storage of all C.H.I.P.s shipped to date. That's an extra 4 gigs!" (Next Thing (November 11, 2016). "3D Acceleration for C.H.I.P., Improved Web Flasher, and Alpha C.H.I.P.s are back!". Next Thing BBS. Retrieved May 15, 2018.) Users later revealed that initial shipments to Kickstarter backers were equipped with 8 GB Hynix NAND. Nevertheless, CHIP OS versions up to 4.3 only used 4GB of its capacity. Later CHIP production employed a 4 GB Toshiba NAND unit. OS 4.4.13 made possible to utilize 8GB on CHIP equipped with Hynix. (mvusse (BBS handle) (Dec 25, 2016). ""Disk" Space Without GUI". Next Thing BBS. Retrieved May 15, 2018.)
^ abcAs of April 19, 2018, the user community has received definitive confirmation that "Next Thing Co. has executed a General Assignment for the Benefit of Creditors on March 16, 2018" with an insolvency service company that is selling its assets and intellectual properties. ("Reports about Insolvency true?". April 19, 2018. Archived from the original on September 18, 2018. Retrieved November 9, 2018.)
^The user's BBS handle is jafcobendjafcobend; et al. (February 25, 2018). "Planning for the inevitable". Next Thing, Co. Archived from the original on July 18, 2018. Retrieved July 18, 2018.
.png)