A major safety upgrade project, funded by the Colorado State Historical Fund, was started in 2001 and completed in 2009.[6] The design by Fentress Architects added modern safety features, like enclosed stair towers, that blended in with the original architecture.[7] The Colorado Capitol Building is featured on many of Denver's architectural tours.[8][9]
Building
Serving as the beginning of the Capitol Hill district, the historic building sits slightly higher than the rest of downtown Denver. The main entrance hall is open 180 feet (55 m) to the top of the dome, about the height of an 18-story building. Additionally, the official elevation of Denver is measured outside the west entrance to the building, where the fifteenth step is engraved with the words "One Mile Above Sea Level". From this step, at 5,280 feet (1,609 m), the sun can be seen setting behind the Rocky Mountains. A second mile high marker was set in the 18th step in 1969 when Colorado State University students resurveyed the elevation. In 2003, a more accurate measurement was made with modern means, and the 13th step was identified as being one mile (1.6 km) high, where a 3rd marker was installed.[10]
Materials
The superstructure of the building was constructed using granite from the Aberdeen Quarry near Gunnison, Colorado. Approximately 280,000 cubic feet (7,900 m3) or 24,000 tons of the granite were quarried for the building. This gray granite forms the exterior of the building. The interior of the building uses a large amount of Colorado Rose Onyx, a rare rose marble from a quarry near Beulah, Colorado. The amount used in the building consumed the entire known supply. White Yule Marble from the quarries near Marble, Colorado was also used throughout the capitol for the floors. Many designs have been found in the marble including an image resembling George Washington and another of Molly Brown.[11][12]
Many of the windows are made of stained glass, depicting people or events related to the history of Colorado. The halls are decorated with portraits of every president of the United States, with all the presidents from George Washington to George W. Bush being painted by Lawrence Williams. Painter Sarah A. Boardman took over from Williams, and has since painted Barack Obama, and Donald Trump. Colorado artist Kirsten Savage has been commissioned to paint President Joe Biden. [13] One of the contractors for the construction of the Colorado State Capitol building was Illinois building contractor William Douglas Richardson, who was the president of the W. D. Richardson Construction Company.[14] Richardson had participated in numerous major building contracts throughout the United States, and was interconnected with the Jacob Bunn and John Whitfield Bunn network of corporations.[15]
^Everett, Derek R. (2005). The Colorado State Capitol: History, Politics, Preservation. Louisville, Colorado: The University Press of Colorado. ISBN9780870817908.
^"Archives |". Colorado.gov. Retrieved July 2, 2017.
.jpg)
