You do not have permission to edit this page, for the following reasons:

This IP address has been blocked from editing Wikipedia.
This does not affect your ability to read Wikipedia pages.
Most people who see this message have done nothing wrong. Some kinds of blocks restrict editing from specific service providers or telecom companies in response to recent abuse or vandalism, and can sometimes affect other users who are unrelated to that abuse. Review the information below for assistance if you do not believe that you have done anything wrong.

The IP address or range 3.91.0.0/16 has been blocked (disabled) by ‪L235‬ for the following reason(s):

The IP address that you are currently using has been blocked because it is believed to be a web host provider or colocation provider. To prevent abuse, web hosts and colocation providers may be blocked from editing Wikipedia.
You will not be able to edit Wikipedia using a web host or colocation provider because it hides your IP address, much like a proxy or VPN.
We recommend that you attempt to use another connection to edit. For example, if you use a proxy or VPN to connect to the internet, turn it off when editing Wikipedia. If you edit using a mobile connection, try using a Wi-Fi connection, and vice versa. If you are using a corporate internet connection, switch to a different Wi-Fi network. If you have a Wikipedia account, please log in.
If you do not have any other way to edit Wikipedia, you will need to request an IP block exemption.

How to appeal if you are confident that your connection does not use a colocation provider's IP address:
If you are confident that you are not using a web host, you may appeal this block by adding the following text on your talk page: ((unblock|reason=Caught by a colocation web host block but this host or IP is not a web host. My IP address is _______. Place any further information here. ~~~~)). You must fill in the blank with your IP address for this block to be investigated. Your IP address can be determined here. Alternatively, if you wish to keep your IP address private you can use the unblock ticket request system. There are several reasons you might be editing using the IP address of a web host or colocation provider (such as if you are using VPN software or a business network); please use this method of appeal only if you think your IP address is in fact not a web host or colocation provider.

Administrators: The IP block exemption user right should only be applied to allow users to edit using web host in exceptional circumstances, and requests should usually be directed to the functionaries team via email. If you intend to give the IPBE user right, a CheckUser needs to take a look at the account. This can be requested most easily at SPI Quick Checkuser Requests. Unblocking an IP or IP range with this template is highly discouraged without at least contacting the blocking administrator.

This block will expire on 21:36, 3 July 2026.

Even when blocked, you will usually still be able to edit your user talk page, as well as email administrators and other editors.

For information on how to proceed, please read the FAQ for blocked users and the guideline on block appeals. The guide to appealing blocks may also be helpful.

Other useful links: Blocking policy · Help:I have been blocked
Your IP address is in a range that has been blocked on all Wikimedia Foundation wikis. The block was made by ‪Wiki13‬. The reason given is Open proxy/Webhost: Visit the FAQ if you are affected .
- Start of block: 13:43, 5 May 2022
- Expiry of block: 13:43, 5 May 2024
Your current IP address is 3.91.25.123. The blocked range is 3.91.0.0/16. Please include all above details in any queries you make. If you believe you were blocked by mistake, you can find additional information and instructions in the No open proxies global policy. Otherwise, to discuss the block please post a request for review on Meta-Wiki. You could also send an email to the stewards VRT queue at stewards@wikimedia.org including all above details.

You can view and copy the source of this page:

((Short description|Adaptive algorithm))
((refimprove|date=December 2016))
'''Constant false alarm rate''' ('''CFAR''') detection refers to a common form of [[adaptive algorithm]] used in [[radar]] systems to detect target returns against a background of [[Noise (radio)|noise]], [[clutter (radar)|clutter]] and interference.<ref name="ssp">((cite book
|title=[[Statistical Signal Processing]]: Detection, Estimation, and Time Series Analysis
|first=Louis L.
|last=Scharf
|publisher=[[Addison Wesley]], NY
|isbn=0-201-19038-9
))</ref>

==Principle==
In the radar receiver, the returning echoes are typically received by the [[antenna (radio)|antenna]], amplified, down-converted to an [[intermediate frequency]], and then passed through detector circuitry that extracts the envelope of the signal, known as the ''video signal''. This video signal is proportional to the [[Electric power|power]] of the received echo. It comprises the desired echo signal as well as the unwanted signals from internal receiver noise and external [[clutter (radar)|clutter]] and [[Electromagnetic interference|interference]]. The term ''video'' refers to the resulting signal being appropriate for display on a [[cathode ray tube]], or "video screen".

The role of the constant false alarm rate circuitry is to determine the power threshold above which any return can be considered to probably originate from a target as opposed to one of the spurious sources. If this threshold is too low, more real targets will be detected, but at the expense of increased numbers of false alarms. Conversely, fewer targets will be detected if the threshold is too high, but the number of false alarms will also be low. In most radar detectors, the threshold is set to achieve a required probability of false alarm (equivalently, false alarm rate or time between false alarms).

Suppose the background against which targets are to be detected is constant with time and space. In that case, a fixed threshold level can be chosen that provides a specified probability of false alarm, governed by the [[probability density function]] of the noise, which is usually assumed to be [[Additive white Gaussian noise|Gaussian]]. The probability of detection is then a function of the [[signal-to-noise ratio]] of the target return. However, in most fielded systems, unwanted clutter and interference sources mean that the noise level changes both spatially and temporally. In this case, a changing threshold can be used, where the threshold level is raised and lowered to maintain a constant probability of false alarm. This is known as constant false alarm rate (CFAR) detection.

==Cell-averaging CFAR==
[[File:Constant_false_alarm_rate.png|thumb|Constant False Alarm Rate(CFAR). The center is the cell under test. The two adjacent cells are added and multiplied by a constant to establish a threshold.]]
Detection occurs when the cell under test exceeds the threshold. In most simple CFAR detection schemes, the threshold level is calculated by estimating the noise floor level around the cell under test (CUT). This can be found by taking a block of cells around the CUT and calculating the average power level. Cells immediately adjacent to the CUT are normally ignored to avoid corrupting this estimate with power from the CUT itself (and referred to as "guard cells"). A target is declared present in the CUT if it is greater than all its adjacent cells and greater than the local average power level. The estimate of the local power level may sometimes be increased slightly to allow for the limited sample size. This simple approach is called a cell-averaging CFAR (CA-CFAR).

Other related approaches calculate separate averages for the cells to the left and right of the CUT, and then use the greatest-of or least-of these two power levels to define the local power level. These are referred to as greatest-of CFAR (GO-CFAR) and least-of CFAR (LO-CFAR), respectively, and can improve detection when immediately adjacent to areas of clutter.

==Sophisticated CFAR approaches==

More sophisticated CFAR algorithms can adaptively select a threshold level by taking a rigorous account of the statistics of the background in which targets are to be detected.  This is particularly common in maritime surveillance (radar) applications, where the background of [[sea clutter]] is particularly spikey and not well approximated by [[additive white Gaussian noise]].  This is a difficult detection problem, as it is difficult to differentiate between spikes due to the sea surface returns and spikes due to valid returns from, for example, [[submarine]] [[periscopes]].  The [[K-distribution]] is a popular distribution for modelling sea clutter characteristics.

==See also==
* [[Detection theory]]
* [[False alarm]]
* [[Pulse-Doppler signal processing]]
* [[Receiver operating characteristic]]

== References ==
((Reflist))

((DEFAULTSORT:Constant False Alarm Rate))
[[Category:Radar signal processing]]
[[Category:Detection theory]]

Pages transcluded onto the current version of this page (help):

Constant false alarm rate (edit)
Template:Ambox (view source) (template editor protected)
Template:Cite book (view source) (protected)
Template:Find sources mainspace (view source) (template editor protected)
Template:Main other (view source) (protected)
Template:More citations needed (view source) (template editor protected)
Template:Pagetype (view source) (protected)
Template:Refimprove (view source) (template editor protected)
Template:Reflist (view source) (protected)
Template:Reflist/styles.css (view source) (protected)
Template:SDcat (view source) (protected)
Template:Short description (view source) (protected)
Template:Short description/lowercasecheck (view source) (protected)
Module:Arguments (view source) (protected)
Module:Category handler (view source) (protected)
Module:Category handler/blacklist (view source) (protected)
Module:Category handler/config (view source) (protected)
Module:Category handler/data (view source) (protected)
Module:Category handler/shared (view source) (protected)
Module:Check for unknown parameters (view source) (protected)
Module:Citation/CS1 (view source) (protected)
Module:Citation/CS1/COinS (view source) (protected)
Module:Citation/CS1/Configuration (view source) (protected)
Module:Citation/CS1/Date validation (view source) (protected)
Module:Citation/CS1/Identifiers (view source) (protected)
Module:Citation/CS1/Utilities (view source) (protected)
Module:Citation/CS1/Whitelist (view source) (protected)
Module:Citation/CS1/styles.css (view source) (protected)
Module:Disambiguation/templates (view source) (protected)
Module:Find sources (view source) (template editor protected)
Module:Find sources/config (view source) (template editor protected)
Module:Find sources/links (view source) (template editor protected)
Module:Find sources/templates/Find sources mainspace (view source) (template editor protected)
Module:Message box (view source) (protected)
Module:Message box/ambox.css (view source) (protected)
Module:Message box/configuration (view source) (protected)
Module:Namespace detect/config (view source) (protected)
Module:Namespace detect/data (view source) (protected)
Module:Pagetype (view source) (protected)
Module:Pagetype/config (view source) (protected)
Module:Pagetype/disambiguation (view source) (protected)
Module:Pagetype/setindex (view source) (protected)
Module:Pagetype/softredirect (view source) (protected)
Module:SDcat (view source) (protected)
Module:String (view source) (protected)
Module:Unsubst (view source) (protected)
Module:Wikitext Parsing (view source) (protected)
Module:Yesno (view source) (protected)

Return to Constant false alarm rate.

Retrieved from "https://en.wikipedia.org/wiki/Constant_false_alarm_rate"