You do not have permission to edit this page, for the following reasons:

This IP address has been blocked from editing Wikipedia.
This does not affect your ability to read Wikipedia pages.
Most people who see this message have done nothing wrong. Some kinds of blocks restrict editing from specific service providers or telecom companies in response to recent abuse or vandalism, and can sometimes affect other users who are unrelated to that abuse. Review the information below for assistance if you do not believe that you have done anything wrong.

The IP address or range 52.91.0.0/16 has been blocked (disabled) by ‪JJMC89‬ for the following reason(s):

The IP address that you are currently using has been blocked because it is believed to be a web host provider or colocation provider. To prevent abuse, web hosts and colocation providers may be blocked from editing Wikipedia.
You will not be able to edit Wikipedia using a web host or colocation provider because it hides your IP address, much like a proxy or VPN.
We recommend that you attempt to use another connection to edit. For example, if you use a proxy or VPN to connect to the internet, turn it off when editing Wikipedia. If you edit using a mobile connection, try using a Wi-Fi connection, and vice versa. If you are using a corporate internet connection, switch to a different Wi-Fi network. If you have a Wikipedia account, please log in.
If you do not have any other way to edit Wikipedia, you will need to request an IP block exemption.

How to appeal if you are confident that your connection does not use a colocation provider's IP address:
If you are confident that you are not using a web host, you may appeal this block by adding the following text on your talk page: ((unblock|reason=Caught by a colocation web host block but this host or IP is not a web host. My IP address is _______. Place any further information here. ~~~~)). You must fill in the blank with your IP address for this block to be investigated. Your IP address can be determined here. Alternatively, if you wish to keep your IP address private you can use the unblock ticket request system. There are several reasons you might be editing using the IP address of a web host or colocation provider (such as if you are using VPN software or a business network); please use this method of appeal only if you think your IP address is in fact not a web host or colocation provider.

Administrators: The IP block exemption user right should only be applied to allow users to edit using web host in exceptional circumstances, and requests should usually be directed to the functionaries team via email. If you intend to give the IPBE user right, a CheckUser needs to take a look at the account. This can be requested most easily at SPI Quick Checkuser Requests. Unblocking an IP or IP range with this template is highly discouraged without at least contacting the blocking administrator.

This block will expire on 05:26, 2 September 2024.

Even when blocked, you will usually still be able to edit your user talk page, as well as email administrators and other editors.

For information on how to proceed, please read the FAQ for blocked users and the guideline on block appeals. The guide to appealing blocks may also be helpful.

Other useful links: Blocking policy · Help:I have been blocked
Your IP address is in a range that has been blocked on all Wikimedia Foundation wikis. The block was made by ‪Jon Kolbert‬. The reason given is Open proxy/Webhost: See the help page if you are affected .
- Start of block: 04:57, 27 November 2021
- Expiry of block: 04:57, 27 November 2024
Your current IP address is 52.91.194.66. The blocked range is 52.91.0.0/16. Please include all above details in any queries you make. If you believe you were blocked by mistake, you can find additional information and instructions in the No open proxies global policy. Otherwise, to discuss the block please post a request for review on Meta-Wiki. You could also send an email to the stewards VRT queue at stewards@wikimedia.org including all above details.

You can view and copy the source of this page:

((Short description|Device to count and size particles))
((More citations needed|date=July 2019))
[[File:Particle Transit Channel.gif|150px|thumb|right|Coulter principle — the transient current drop is proportional to the particle volume]]
[[File:coultercounter.jpg|150px|thumb|right|The tip of the Coulter counter in a [[buffer solution]], counting cells in solution.]]

A '''Coulter counter'''<ref>W. R. Hogg, W. Coulter; Apparatus and method for measuring a dividing particle size of a particulate system; United States Patent 3557352</ref><ref>((US patent|7397232)) ''Coulter counter''</ref> is an apparatus for counting and sizing particles suspended in [[electrolyte]]s. The Coulter counter is the commercial term for the technique known as [[resistive pulse sensing]] or electrical zone sensing. The apparatus is based on the Coulter principle named after its inventor, [[Wallace H. Coulter]].

A typical Coulter counter has one or more [[Microchannel (microtechnology)|microchannels]] that separate two chambers containing electrolyte [[Solution (chemistry)|solutions]]. As fluid that contains particles or cells is drawn through the microchannels, each particle causes a brief change to the [[Electrical resistance and conductance|electrical resistance]] of the liquid. The counter detects these changes in the electrical resistance.

==Coulter principle==
The Coulter principle states that particles pulled through an orifice, concurrent with an [[electric current]], produce a change in [[Electrical impedance|impedance]] proportional to the volume of the particle traversing the orifice. This pulse in impedance originates from the displacement of electrolyte caused by the particle.

The Coulter principle relies on the fact that particles moving in an electric field cause measurable disturbances in that field. The magnitudes of these disturbances are proportional to the size of the particles in the field. Coulter identified several requirements necessary for practical application of this phenomenon:
*The particles must be suspended in a conducting liquid.
*The electrical field must be physically constricted so that the movement of particles in the field causes detectable changes in the current.
*The particles must be dilute enough so that only one at a time passes through the physical constriction.

If multiple particles pass through the constriction simultaneously, their impedance profiles will overlap, resulting in an [[Artifact (error)|artifact]] known as coincidence. The apparatus cannot differentiate between one large particle and multiple small overlapping particles, causing anomalies in the resulting data.

A variety of experimental devices have been designed based on the Coulter principle. A few of these devices have been commercialized, with the most well-known applications being in the medical industry, particularly in [[hematology]] to count and size the various cells that comprise whole blood. All implementations of the Coulter principle have compromises between sensitivity, noise shielding, solvent compatibility, speed of measurement, sample volume, [[dynamic range]], and reliability of device manufacture.

==Development ==
[[File:Coulter geometries.png|thumb|Coulter patented several different implementations of the Coulter principle. Image taken from US Patent ((abbr|No.|number))&nbsp;2,656,508.]]
Wallace H. Coulter discovered the Coulter principle in the late 1940s, though a [[patent]] was not awarded until October 20, 1953. Coulter was influenced by the [[Atomic bombings of Hiroshima and Nagasaki|atomic bombs dropped on Hiroshima and Nagasaki]], which motivated him to improve and streamline complete blood counting for use in large scale screening, as would be necessary in the event of a nuclear war.<ref>((Cite journal|last=Graham|first=Marshall|date=2020-01-01|title=THE COULTER PRINCIPLE: FOR THE GOOD OF HUMANKIND|url=https://uknowledge.uky.edu/history_etds/62|journal=Theses and Dissertations--History|doi=10.13023/etd.2020.495))</ref> Partial funding of the project came from a grant award from the [[Office of Naval Research]].<ref name=Graham2003>((cite journal|author=Marshall Don. Graham|year=2003|title=The Coulter Principle: Foundation of an Industry|journal=[[Journal of Laboratory Automation]]|volume=8|issue=6|pages=72–81|doi=10.1016/S1535-5535-03-00023-6|doi-access=free))</ref><ref>''Cytometry volume 10'', a DVD series produced by the Purdue University Cytometry Labs http://www.cyto.purdue.edu/cdroms/cyto10a/seminalcontributions/coulter.html</ref>

Coulter was awarded US Patent ((abbr|No.|number))&nbsp;2,656,508, ''Means for Counting Particles Suspended in a Fluid''. This Coulter counter is an analytical instrument which employs the Coulter principle for a specific task, most commonly counting cells. The most commercially successful application of the Coulter principle is in hematology, where it is used to obtain information about patients' blood cells. Coulter counters can also be used in the processing and manufacturing of paint, ceramics, glass, metals, and food. They are also routinely employed for quality control.

[[File:Model A COULTER COUNTER from Advertisement.jpg|thumb|The first commercial Coulter counter]]
Cells, being poorly conductive particles, alter the effective cross-section of the conductive microchannel. If these particles are less conductive than the surrounding liquid medium, the electrical resistance across the channel increases, causing the electric current passing across the channel to briefly decrease. By monitoring such pulses in electric current, the number of particles for a given volume of fluid can be counted. The size of the electric current change is related to the size of the particle, enabling a particle size distribution to be measured, which can be correlated to mobility, [[surface charge]], and concentration of the particles.

The amount and quality of data obtained varies greatly as a function of the [[signal processing]] circuitry in the Coulter counter. Amplifiers with lower noise thresholds and greater dynamic range can increase the sensitivity of the system, and digital [[pulse height analyzer]]s with variable bin widths provide much higher resolution data as compared to analog analyzers with fixed bins. Combining a Coulter counter with a digital computer allows capture and analysis of many electrical pulse characteristics, while analog counters typically store a limited amount of information about each pulse.

As electric current detectors became more sensitive and less expensive, the Coulter counter became a common [[hospital laboratory]] instrument for quick and accurate analysis of [[complete blood count]]s (CBC). The CBC is used to determine the number or proportion of white and red blood cells in the body. Previously, this procedure involved preparing a [[peripheral blood smear]] and manually counting each type of cell under a [[microscope]], a process that typically required a half-hour.

A Coulter counter played an important role in the development of the first [[Cell sorting#Methods|cell sorter]], and was involved in the early development of [[flow cytometry]]. Some flow cytometers continue to utilize the Coulter principle to provide information about cell size and count.

===Formats===

While a Coulter counter can be designed in a variety of ways, there are two chief configurations that have become the most commercially relevant: an aperture format and a flow cell format.

The aperture format is the most-used configuration in commercial Coulter counters, and is suited to testing samples for quality control. In this setup, a small aperture (hole) of specific size is created in a material such as a jewel disk (made of the same material as [[jewel bearing]]s in watches).<ref name=Graham2003/> This disk is then embedded in the wall of a glass tube, which is then referred to as an aperture tube. The aperture tube is placed in a conducting liquid such that the aperture is completely submerged, and a pump at the top of the tube draws liquid through the aperture. Electrical current is passed through electrodes on either side of the aperture tube; because glass is an electrical insulator, all of this current flows through the aperture. After recording baseline data, the sample to be analyzed is slowly added to the conducting liquid and drawn through the aperture. Variations in conductivity, caused as sample particles pass through the aperture, are recorded as electrical pulses and analyzed to determine the characteristics of the particles and the sample as a whole.

The flow cell format is most commonly implemented in hematology instruments, and some flow cytometers. In this format, electrodes are embedded at either end of a flow channel and the electric field is applied across the channel. This arrangement allows for continuous sample analysis and can be combined with other instrumentation (when equipped with a sheath flow to keep particles centered in middle of the flow channel). This can permit additional measurements to be performed simultaneously, such as probing the particle with a laser. The major disadvantages of the flow cell format are that it is much more expensive to manufacture and is typically fixed to a single channel width, whereas the aperture format offers a wide variety of aperture sizes.

[[Microfluidic]] approaches have been used to apply the Coulter principle to  [[lab-on-a-chip]] particle detection. These techniques allow much smaller pores (holes) to be fabricated than can easily be achieved using in the aperture format. These approaches, known by the generic phrase [[microfluidic resistive pulse sensing]], have allowed the extension of the Coulter principle to the deep sub-[[micron]] range, allowing, for example, the direct detection of virus particles in fluid.<ref>J. J. Kasianowicz et al.. "Characterization of individual polynucleotide molecules using a membrane channel", P. Natl. Acad. Sci. USA 93,13770–13773 (1996)</ref><ref>O. Saleh and L. L. Sohn, "An artificial nanopore for molecular sensing", Nano Lett. 3, 37–38 (2003)</ref><ref>J.-L. Fraikin, T. Teesalu, C. M. McKenney, E. Ruoslahti and A. N. Cleland, "A high-throughput label-free nanoparticle analyzer," Nature Nanotechnology 6, 308–313 (2011)</ref>

== Experimental considerations ==

There are a number of common considerations in creating a test methodology with Coulter counters.

=== Coincidence ===
Anomalous electrical pulses can be generated if multiple particles enter the aperture simultaneously. This situation is known as ''coincidence''. This occurs because there is no way to ensure that a single large pulse is the result of a single large particle or multiple small particles entering the aperture at once. To prevent this situation, samples must be fairly dilute.

=== Particle path ===
The shape of the generated electrical pulse varies with the particle's path through the aperture. Signal artifacts can occur if the electric field density varies across the diameter of the aperture. This variance is a result of both the physical constriction of the electric field and also the fact that the liquid velocity varies as a function of radial location in the aperture. In the flow cell format, this effect is minimized since sheath flow ensures each particle travels an almost identical path through the flow cell. In the aperture format, signal processing algorithms can be used to correct for artifacts resulting from particle path.

=== Conductive particles ===
Conductive particles are a common concern but rarely affect the results of an experiment. This is because the conductivity difference between most conductive materials and ions in liquid (referred to as the discharge potential) is so great that most conductive materials act as insulators in a Coulter counter. The voltage necessary to break down this potential barrier is referred to as the breakdown voltage. For those highly conductive materials that present a problem, the voltage used during a Coulter experiment can be reduced below the breakdown potential (which can be determined empirically).

=== Porous particles ===
The Coulter principle measures the volume of an object, since the disturbance in the electric field is proportional to the volume of electrolyte displaced from the aperture. This leads to some confusion amongst those who are used to optical measurements from microscopes or other systems that only view two dimensions and also show the boundaries of an object. The Coulter principle, on the other hand, measures three dimensions and the volume displaced by an object.

=== Direct current and alternating current ===
The Coulter counter as invented by Wallace Coulter applies a [[direct current]] (DC) in order to count particles (cells), and produces electrical pulses of amplitude dependent on the size of cells. The cells can be modelled as [[electrical insulator]]s surrounded by a conductive liquid which block a portion of the electrical path thus increasing the measured [[electrical resistance|resistance]] momentarily. This is the most common measuring system using the Coulter principle.

Subsequent developments were able to extend the information obtained by using [[alternating current]] (AC) in order to probe the [[complex numbers|complex]] [[electrical impedance#Complex impedance|electrical impedance]] of the cells rather their simply counting their number.<ref>((cite journal|last1=Youchun Xu|last2=XinwuXie|last3=Yong Duan|last4=Lei Wang|last5=Zhen Cheng|last6=Jing Cheng|title=A review of impedance measurements of whole cells|journal=Biosensors and Bioelectronics|volume=77|pages=824–836|date=15 March 2016|url=https://www.sciencedirect.com/science/article/pii/S0956566315304917|doi=10.1016/j.bios.2015.10.027|pmid=26513290))</ref> The cell may then be approximately modelled as an insulating [[cell membrane]] surrounding the cell's [[cytoplasm]], which is conductive. The thinness of the cell membrane creates an [[electrical capacitance]] between the cytoplasm and the electrolyte surrounding the cell. The electrical impedance may then be measured at different AC frequencies. At low frequencies (well below 1&nbsp;[[MHz]]) the impedance is similar to the DC resistance. However, higher frequencies in the MHz range can be used to probe the thickness of the cell membrane (which determines its capacitance). At much higher frequencies (well above 10&nbsp;MHz) the impedance of the membrane capacitance drops to the point where the larger contribution to the measured impedance is from the cytoplasm itself (the membrane is essentially "[[short circuit|shorted out]]"). Thus, by using different frequencies, the apparatus can become sensitive to the internal structure and composition of the cells.

== Applications ==
[[File:Coulter-counter_hg.jpg|thumb|Coulter counter manufactured by Coulter Electronics Ltd., England (1960)]]

=== Hematology ===
The most successful and important application of the [[Celloscope automated cell counter|Coulter counter]] is in the characterization of human blood cells. The technique has been used to diagnose a variety of diseases and is the standard method for obtaining red blood cell counts (RBCs) and white blood cell counts (WBCs) as well as several other common parameters. When combined with other technologies such as fluorescence tagging and light scattering, the Coulter principle can help produce a detailed profile of a patient's blood cells.

=== Cell count and size ===
In addition to clinical counting of blood cells (cell diameters usually 6–10 micrometers), the Coulter counter has established itself as the most reliable laboratory method for counting a wide variety of cells, ranging from bacteria (<1 micrometer in size), fat cells (about 400 micrometers), [[stem cell]] [[Embryoid body|embryoid bodies]] (about 900 micrometers), and plant cell aggregates (>1200 micrometers).

=== Particle characterization ===
Coulter counters have been used in a wide variety of fields for their ability to individually measure particles, independent of optical properties, sensitivity, and dependability. The principle has been adapted to the nanoscale to produce [[nanoparticle]] characterization techniques known as [[microfluidic resistive pulse sensing]] as well as one commercial venture which sells a technique it terms [[tunable resistive pulse sensing]] (TRPS). TRPS enables high-fidelity analysis of a diverse set of nanoparticles, including functionalized [[nanomedicine|drug delivery nanoparticles]], [[virus-like particle]]s (VLPs), [[liposome]]s, [[Exosome (vesicle)|exosomes]], [[Polymersome|polymeric nanoparticles]], and [[microbubbles]].[[File:Coulter_counter.jpg|thumb|Coulter counter Model ZK]]

==See also==
*[[Hemocytometer]]
*[[Flow cytometry]]
*[[Hematology analyzer]]

==References==
<references/>

==External links==
((Commons category|Coulter counters))
*https://web.archive.org/web/20080424022037/http://web.mit.edu/invent/iow/coulter.html
*((Patent|US|2656508|''Means for counting particles suspended in a fluid'')), October 20, 1953, Wallace H. Coulter
*"Dynamically resizable nanometre-scale apertures for molecular sensing"; Stephen J. Sowerby, Murray F. Broom, George B. Petersen; Sensors and Actuators B: Chemical Volume 123, Issue 1 (2007), pages 325–330

((Beckman Coulter))

[[Category:Cell culture techniques]]
[[Category:Counting instruments]]
[[Category:Laboratory equipment]]

Pages transcluded onto the current version of this page (help):

Coulter counter (edit)
Template:Abbr (view source) (protected)
Template:Ambox (view source) (template editor protected)
Template:Beckman Coulter (edit)
Template:Citation/make link (view source) (protected)
Template:Citation/styles.css (view source) (template editor protected)
Template:Cite journal (view source) (protected)
Template:Cite patent (view source) (template editor protected)
Template:Cite patent/core (view source) (template editor protected)
Template:Commons category (view source) (template editor protected)
Template:Digits (view source) (template editor protected)
Template:Find sources mainspace (view source) (template editor protected)
Template:Hlist/styles.css (view source) (protected)
Template:Main other (view source) (protected)
Template:More citations needed (view source) (template editor protected)
Template:Navbox (view source) (template editor protected)
Template:Pagetype (view source) (protected)
Template:Patent (view source) (semi-protected)
Template:Plainlist/styles.css (view source) (protected)
Template:Replace (view source) (protected)
Template:SDcat (view source) (protected)
Template:Short description (view source) (protected)
Template:Short description/lowercasecheck (view source) (protected)
Template:Side box (view source) (template editor protected)
Template:Sister project (view source) (template editor protected)
Template:US patent (view source) (template editor protected)
Module:Arguments (view source) (protected)
Module:Category handler (view source) (protected)
Module:Category handler/blacklist (view source) (protected)
Module:Category handler/config (view source) (protected)
Module:Category handler/data (view source) (protected)
Module:Category handler/shared (view source) (protected)
Module:Check for unknown parameters (view source) (protected)
Module:Citation/CS1 (view source) (protected)
Module:Citation/CS1/COinS (view source) (protected)
Module:Citation/CS1/Configuration (view source) (protected)
Module:Citation/CS1/Date validation (view source) (protected)
Module:Citation/CS1/Identifiers (view source) (protected)
Module:Citation/CS1/Utilities (view source) (protected)
Module:Citation/CS1/Whitelist (view source) (protected)
Module:Citation/CS1/styles.css (view source) (protected)
Module:Disambiguation/templates (view source) (protected)
Module:Find sources (view source) (template editor protected)
Module:Find sources/config (view source) (template editor protected)
Module:Find sources/links (view source) (template editor protected)
Module:Find sources/templates/Find sources mainspace (view source) (template editor protected)
Module:Message box (view source) (protected)
Module:Message box/ambox.css (view source) (protected)
Module:Message box/configuration (view source) (protected)
Module:Namespace detect/config (view source) (protected)
Module:Namespace detect/data (view source) (protected)
Module:Navbar (view source) (protected)
Module:Navbar/configuration (view source) (protected)
Module:Navbar/styles.css (view source) (protected)
Module:Navbox (view source) (template editor protected)
Module:Navbox/configuration (view source) (template editor protected)
Module:Navbox/styles.css (view source) (template editor protected)
Module:Pagetype (view source) (protected)
Module:Pagetype/config (view source) (protected)
Module:Pagetype/disambiguation (view source) (protected)
Module:Pagetype/setindex (view source) (protected)
Module:Pagetype/softredirect (view source) (protected)
Module:SDcat (view source) (protected)
Module:Side box (view source) (template editor protected)
Module:Side box/styles.css (view source) (template editor protected)
Module:String (view source) (protected)
Module:Unsubst (view source) (protected)
Module:WikidataIB (view source) (template editor protected)
Module:WikidataIB/nolinks (view source) (template editor protected)
Module:WikidataIB/titleformats (view source) (template editor protected)
Module:Wikitext Parsing (view source) (protected)
Module:Yesno (view source) (protected)

Return to Coulter counter.

Retrieved from "https://en.wikipedia.org/wiki/Coulter_counter"