Crucible Industries
Company typeLimited liability company
IndustrySteel
HeadquartersSolvay, New York, a suburb of Syracuse[1]
Area served
Global
Key people
John Shiesley, President[2]
ProductsSpecialty steels:[3]
CPM High Speed Steel
CPM Stainless Tool Steel
CPM Tool Steel
High-speed steel
Stainless steel
Tool steel
Number of employees
550 (2009)[4]
WebsiteCrucibleIndustries.com

Crucible Industries, commonly known as Crucible, is an American company which develops and manufactures specialty steels, and is the sole producer of a line of sintered steels known as Crucible Particle Metallurgy (CPM) steels. The company produces high speed, stainless and tool steels for the automotive, cutlery, aerospace, and machine tool industries.[5][6]

Crucible's history spans over 100 years, and the company inherited some of its ability to produce high-grade steel from England beginning in the late 1800s. Thirteen crucible-steel companies merged in 1900 to become the largest producer of crucible steel in the United States, and this company evolved into a corporation with 1,400 employees in several states.

Crucible declined in tandem with the automotive industry during the 1980s, recovering over the next decade. Although the company entered bankruptcy in 2009, JP Industries of Cleveland revived it as Crucible Specialty Metals Division to continue producing specialty steels at its original site.[7][8]

Some of Crucible's products are manufactured using a powder metallurgy process (their CPM process), resulting in steels with superior mechanical properties. These steels find specialized scientific and industrial applications and are also favoured by knife makers for the production of blades which are tough, hard and corrosion resistant.[9]

History

Large gray outdoor piles, surrounded by factory equipment
Iron ore pellets for the production of steel
Large, lit factory at twilight
Blast-furnace steel plant in the United Kingdom
Drawing describing a blast furnace
Basic blast furnace process to obtain metal from ore:
  1. Iron ore + limestone sinter
  2. Coke
  3. Elevator
  4. Feedstock inlet
  5. Layer of coke
  6. Layer of sinter pellets of ore and limestone
  7. Hot blast (around 1200 °C)
  8. Removal of slag
  9. Tapping of molten pig iron
  10. Slag pot
  11. Torpedo car for pig iron
  12. Dust cyclone for separation of solid particles
  13. Cowper stoves for hot blast
  14. Smoke outlet (can be redirected to carbon capture & storage (CCS) tank)
  15. Feed air for Cowper stoves (air pre-heaters)
  16. Powdered coal
  17. Coke oven
  18. Coke
  19. Blast furnace gas downcomer

The Crucible Steel Company of America was formed from the merger of thirteen crucible-steel companies in 1900. This, known as "the great consolidation of 1900", inspired other steel companies to form U.S. Steel a year later.[10] From 1900 through the 20th century, Crucible developed and patented new steels, and brought new steel-production methods to the United States.[10] C. H. Halcomb, Jr. was Crucible's first president and general manager. Two years later, he left Crucible, building the Halcomb Steel mill next door (where he installed the first electric-arc melting furnace in the U.S.).[7][8]

Metal tubes piled against a stone building
Crucible steel next to a furnace room at the Abbeydale Industrial Hamlet

In 1911 Crucible acquired Halcomb Steel, merging the Halcomb plant with the new Sanderson plant to form the Sanderson-Halcomb Works. In 1955, it began producing vacuum-arc-remelted steels, becoming the first company to use this process commercially. By 1939, Crucible was the largest producer of tool steel in the United States, making over 400 products (more than any other steel company). It had nine mills in four states, two coal mines, a water company and a half-interest in a Mesabi ore mine.[11]

From 1968 to 1984, Crucible was owned by Colt Industries. In 1985, its salaried employees bought it back. By then, the company was known as Crucible Materials Corporation. Fourteen hundred employees worldwide worked for a number of companies, including Crucible Specialty Metals in Solvay, New York; Trent Tube in East Troy, Wisconsin; Crucible Magnetics in Elizabethtown, Kentucky; Crucible Compaction Metals Operations in Oakdale, Pennsylvania; the Cancer Research Center in Pittsburgh, and Crucible Limited in Sheffield, England. In 1989, the number of employees was reduced to 600 after a strike.[7]

The 1980s saw layoffs and plant closures across the U.S.; more than 200,000 workers lost their jobs, and more than 400 mills and divisions of plants (including Crucible's Midland plant) closed.[12] In 1984, Crucible made the titanium alloy used in the artificial heart implanted by Robert Jarvik, and donated corrosive-resistant steel used to help renovate the Statue of Liberty.[7]

Molten steel pours from a furnace
1941 electric arc furnace

During the 1990s, Crucible expanded its operations to Canada, working with General Motors, and building a 35,000-square-foot (3,300 m2) facility with newly patented smelting and processing equipment costing $25 million. Although the number of employees increased to about 1,400, from 2001 to 2003, 200 were laid off.[7]

In 2004, Crucible entered the knife market,[7] and in May 2009, the company filed for Chapter 11 bankruptcy. That October, JP Industries (a private equity group) purchased the operating assets of the Crucible Specialty Metals Division, formed Crucible Industries, and restarted the Geddes steel mill.[7]

Company names

Round furnace
Inside roof of an arc furnace, showing its three electrodes
Open furnace in use, with sparks flying
Tapping an open-hearth furnace, 1967
Advertisement with a drawing of a ship
1913 Halcomb Steel Company advertisement

A number of steel companies have operated in Syracuse, maintaining Crucible's intellectual property and patents.[7] In 1870, William A. Sweet founded the Sweet Iron Works. Sanderson Brothers of Sheffield, England, bought the Sweet Iron Works for U.S. production in 1876, renaming the steelworks Sanderson. In 1900, Sanderson's Syracuse steelworks merged into the Crucible Steel Company of America.[13] In 1946, the Sanderson and Halcomb steelworks were renamed the Sanderson-Halcomb Works, later becoming the Syracuse Works of Crucible Steel. In 1968, Crucible became Colt's Crucible Specialty Metals Division. Colt consolidated its basic-materials group into the Crucible Materials Corporation in 1983.

Founding companies

According to ExplorePAHistory.com, "By 1877, the region's fourteen medium-scale crucible steel factories produced nearly three-fourths of the nation's output. Metal-shaping factories across the country depended on cutting tools made of crucible steel through the 1920s, when electric steel furnaces gained prominence."[14] Three companies which merged to form Crucible into the largest U.S. crucible-steel-producing company were:[10][15]

The other companies which formed Crucible were:

Timeline

The following timeline provides references and events in the context of Crucible's history. Its primary source is the Syracuse Post-Standard archives, with other sources noted.[7]

Sanderson Brothers and Company

1776: The Naylor and Sanderson Steel Mill was established in Sheffield, England, and began producing tool steel with the crucible method.[13] By 1873 it was trading as Sanderson Brothers and Company, and using a gas-fired-crucible melting furnace.[16]

In 1876 Sanderson Brothers and Company bought Sweet Iron Works, which had been established in 1870 in Syracuse.[17] Sheffield was known for its hard, durable steel, and Syracuse was known for its hard steel. Contemporary U.S. tariffs gave Sanderson an incentive for a U.S. operation.[8] In 1878, Sanderson had $450,000 in capital and the following officers: Robert B. Campbell of New York, president; Samuel William Johnson of New York, secretary and William A. Sweet of Syracuse, general manager.[17]

In 1900, thirteen crucible-steel manufacturing companies formed the Crucible Steel Company of America. Sanderson divested itself of its American operation, offering 500,000 shares of stock for $50 million.[15][18] Crucible's fifth annual report (published in 1905) showed debts of $3.6 million, $2.4 million less than the year before.[19]

See caption
Exterior and interior of an electric arc furnace
Gray furnace in museum
1905 Héroult electric-arc DC furnace

Halcomb Steel

In 1902 C. H. Halcomb Jr., Sanderson's president and general manager, left the company and built the Halcomb Steel mill next to the Sanderson mill. Halcomb installed the first electric arc furnace (EAF) in the United States in 1906.[8][20][21] In 1911 the company was acquired by Crucible, which doubled the size of its western branch warehouse (now in Chicago) in 1913.

Hoyt-Noe Steel Company

By 1913, Thatcher Hoyt and Paul E. Noe formed the Hoyt-Noe Steel Company in Chicago. Hoyt had been representing crucible steels for twenty years; his previous companies included the Braeburn Steel Company, Singer, Nimick and Company and the Sanderson Brothers Steel Company.[22]

Crucible

Crucible patented the first formally classified high-speed steel, AISI T1 (German 18-0-1), in 1910, and its basic formula was used for the next forty years. After other high-speed steels were produced, T1 remained one of the most commonly used commercial high-speed steels for the next century.[23][24] The next year Crucible formed the Pittsburg Crucible Steel Company, purchasing a 423-acre (171 ha) site from Midland Steel on the Ohio River near Pittsburgh for $7.5 million to build a new plant.[25] Midland, Pennsylvania became Crucible's planned town.[12][26]

During the 1920s and 1930s, World War I financier Horace S. Wilkinson oversaw Crucible president Frederick B. Hufnagel, refusing to modernize and controlling the company's finances as he pleased. This ended with the creation of the Security and Exchange Commission in 1934 and Wilkinson's death in 1937.[27] At the beginning of World War II Crucible was the largest producer of tool steels in the United States, manufacturing more types of steel than any other company. The company used thirty metals to make 400 commonly used alloy steels. It had nine mills in New York, New Jersey, Pennsylvania and Ohio, two coal mines, a water company and a half-interest in a Mesabi Range iron ore mine. Now the company's chairman, Hufnagel brought in Raoul Eugene Desvernine[28] as president. With a legal background, Desvernine focused on improving sales. The company had about 15,000 customers, net sales of $60 million and earnings of $4 million in 1937. The following year, Crucible lost $2 million as its sales halved during the recession of 1937–38.[11][18]

When Crucible sought to borrow money in 1940, the Mellon Security Corporation insisted on a full audit. This resulted in a $40 million revaluation of the company's property and plants (down to $81 million) and the loss of its fiscal surplus.[27] On December 7, 1941, when the U.S. entered World War II, Syracuse was considered the Porretta Terme (Italy's gear-producing center)[citation needed] of America.[8]

In 1945 William P. Snyder Jr., president of Snyder Mining Company of Pittsburgh and a Crucible stockholder, brought in president William H. Colvin Jr. With the board's approval, Colvin closed four of the company's eleven operations and began a $46 million modernization.[27] The Syracuse plants were consolidated in 1946 into the Sanderson-Halcomb Works. In 1949, Crucible began operations in an $18 million sheet and strip mill at the Midland works, becoming the first steel mill to use hot and cold rolling of stainless and high-alloy sheet and strip. Iron Age, manufacturer of the hot reversing mill, called this a transition from a curiosity to standard production practice; ovens on both sides of the rolls could better control the steel's temperature.[27][29]

When Crucible removed escape clauses from its employee contracts after the war, the company received approval from the United Steelworkers.[30] During the 1950s, shortages of tungsten and vanadium caused by the wartime drive for cheaper alloying metals resulted in the development of AISI M2 high-speed steel.[24] Colt Industries bought Crucible Steel Corporation of America in 1968, and the Syracuse works become Colt's Crucible Specialty Metals Division. In 1975, Crucible began marketing its products in the Soviet Union.[31]

During the 1980s the AISI reported that more than 200,000 steelworkers in the U.S. had lost their jobs, and more than 400 mills and plant divisions were closing (including Crucible's Midland plant near Pittsburgh). Jones & Laughlin Steel bought the Midland plant and merged with Republic Steel to form the LTV Steel Corporation, which went bankrupt.[12]

In 1981 Colt moved the Crucible and Trent Tube Divisions to Syracuse from Pittsburgh, and the following year it began closing its Crucible Steel Plant (laying off 400 workers).[32] In 1983 Colt Industries consolidated its basic-materials group into the Crucible Materials Corporation, with its headquarters in New York City. This was the last year that Crucible Specialty Metals negotiated union contracts without a strike.

In 1984 Crucible manufactured the titanium alloy used in the artificial heart implanted by Robert Jarvik, and donated corrosion-resistant steel for the renovation of the Statue of Liberty. The following year, Crucible Materials Corporation's salaried employees purchased the corporation’s stock in a leveraged buyout and moved its headquarters to Syracuse. The purchase price ($135 million) included the 1,400-employee Crucible Specialty Metals plant in Solvay; Trent Tube in East Troy, Wisconsin; Crucible Magnetics in Elizabethtown, Kentucky; Crucible Compaction Metals Operations in Oakdale, Pennsylvania; Crucible Research Center in Pittsburgh, and Crucible Limited in Sheffield, England.

In 1988, Crucible Specialty Metals modernized its plant and the division employed 1,425 people worldwide. The Crucible Service Centers Division opened its Camillus, New York headquarters in 1989, marketing specialty steel products worldwide. That year, the workers struck; when a contract was signed, only 600 of 1,100 workers were called back to work.

In 1991 Crucible Materials and General Motors' Central Foundry Division begin three years of joint research and development in die casting, tooling and machine elements, and Crucible Materials Corporation purchased Sanderson Specialty Steels of Canada. Two years later union workers rejected a company contract offer, continuing to work. At this time, Crucible employed about 700 union workers. By 1998 CMC employed 820 workers and invested $25 million in a new, 35,000 sq ft (3,300 m2) facility for manufacturing newly patented smelting and processing equipment.

In 2000, the U.S. Department of Labor sued Crucible Materials Corporation over its pension plan for salaried employees. From 2001 to 2003, the corporation laid off 186 salaried and hourly workers on a rotating basis. CMC employed 1,209 workers, 722 union workers and 487 salaried workers in Geddes and its distribution center in Camillus. In 2004 Crucible Specialty Metals entered the knife market, moving its Camillus operation to the Geddes plant.

The corporation filed for Chapter 11 bankruptcy in May 2009,[7][33] and in October JP Industries (a private equity group in Cleveland) purchased the operating assets of the Crucible Specialty Metals Division and formed Crucible Industries.[34] A month later, the Geddes steel mill was restarted.[35]

In 2010, Crucible partnered with Latrobe Specialty Steel Distribution to market its steels. According to Crucible president James Beckman, "Latrobe Distribution offers everything we wanted in a partner for our CPM grades of steel".[citation needed] Latrobe, with eight locations in North America, is a division of Latrobe Specialty Steel of Latrobe, Pennsylvania.[9][34][36] That year Crucible partnered with Robert Zapp Werkstofftechnik, a division of the Zapp Group, to sell Crucible Particle Metallurgy products worldwide except for North America and Japan.[6]

Knife design and manufacturing

Knife on green backpack
Chris Reeve Knives Mark IV one-piece
Five knives
Ernest Emerson's CQC-6 knives
Knife and sheath
Spyderco's FB02, a Bill Moran drop-point

Many production and custom knife manufacturers use Crucible steels.[37][38][39][40] Chris Reeve collaborated with Dick Barber of Crucible to develop the S30V and S35VN steel alloys, and Chris Reeve Knives uses these and other steels.[41][42][43] Bob Loveless introduced 154CM stainless-steel knives in 1972. A founder and president of the Knifemakers' Guild, Loveless has designed for Gerber Knives,[44] Lone Wolf Knives and Beretta.[45] Schrade Cutlery[46] and Spyderco use 154CM, 440C, D2, S30V, S60V and S90V steel,[47][48][49] and Ernest Emerson's knives are hard-ground from differentially heat-treated A2 tool steel.[50] Emerson Knives machines blades from 154CM steel,[citation needed] and Mike Snody uses A2, S35V, 154CM and 440C steels.[51][52] Phill Hartsfield's katana-style blades are hand-ground from A2 tool steel and differentially edge-hardened.[53][54][55] Ken Onion's Kershaw's Blur uses CPM S30V steel.[56]

Products

Crucible Particle Metallurgy (CPM) steels are used in the automotive, aerospace and tool industries.[34] The list of blade materials describes several CPM products, and the company's website has data sheets for all of them.[57] The following table includes trademarks of Crucible users.

Product type Product
CPM® High Speed Steel M4 HC (HS), REX 20® (HS), REX 45® (HS), REX 54® HS, REX 66® (HS), REX 76® (HS), REX 86® HS, REX 121®, T15 (HS)
CPM® Stainless Tool Steel 154, S110V®, S125V®, S30V®,[57] S35VN®,[58] S45VN® S90V® MagnaCut®
CPM® Tool Steel 1V®, 3V®, 4V®, 9V®, 10V®, 15V®
High Speed M2,[24] M4, M50
Stainless 300 Series 303, 303 SE, 304L, 316L, 321, 347, Alloy 20, UNS 21800, XM-19
Stainless 400 Series 154CM,[59] 410, 416, 416R, 420, 422, 430, 430F, 431, 440A, 440C
Stainless Precipitation Hardness Grades 17-4, 17-4 SUPER X, VAR 15-5
Tool A2,[60] CRUWEAR, D2, H13, WR95 (H10 Mod)

Although the following metals add general characteristics to an alloy, its actual characteristics are determined by a number of factors. Metallurgy for the non-Metallurgist[61] is an introduction to the field.

Metal General characteristics
Chromium Hardness, corrosion resistance, wear resistance
Cobalt Electrical, hot hardness when used with molybdenum and tungsten
Nickel Hardness, tensile strength, ductility
Molybdenum Depth of hardness, toughness, strength at higher temperatures, machineability, weldability
Vanadium Very fine grain, fatigue resistance, abrasion resistance at average and higher temperatures
Tungsten Hardness at red heat

CPM process

Hot bar of steel in a mill
Steel ingot entering a rolling mill

Conventional and CPM steel-making smelts ore into steel with an electric arc furnace, refines it by removing some carbon, reducing it by removing the sulphur.[62] Further refining may use argon oxygen decarburization, an implementation of powder metallurgy. The conventional process teems[63] (distributes and pours) the steel into ingot molds. The steel slowly solidifies, allowing the elements to segregate into non-uniform patterns at the microscopic level.

The CPM process pours molten steel through a small nozzle. High-pressure gas atomizes the liquid stream into a spray which rapidly cools the steel into a uniform powder. The powder then goes into high-pressure containers and is heated at forge temperatures to press the powder into ingots; this is known as hot isostatic pressing (HIP), and the resulting metal is uniform.[9] Both processes then use hot or cold rolling to toughen the steel and mill it into finished products.[9]

Publications

Cataloged Crucible

Crucible

Crucible and the U.S. Air Force

See also

Further reading

History

References

  1. ^ "Crucible Location".
  2. ^ "::Crucible Industries:: Home :: You & Us".
  3. ^ "Crucible Industries Products".
  4. ^ Hannagan, Charley (October 2009). "New Crucible owner says his company's in it for long haul". Syracuse.com. The Post-Standard. Retrieved August 2, 2014.
  5. ^ Hannagan, Charley (October 23, 2009). "New owner closes on Crucible Specialty Metals plant". Syracuse.com. The Post-Standard. Retrieved July 30, 2014.
  6. ^ a b Hannagan, Charley (January 23, 2010). "Crucible Industries LLC signs partnership with German firm to sell steel globally". Syracuse.com. The Post-Standard. Retrieved August 2, 2014.
  7. ^ a b c d e f g h i j "A Timeline of Crucible Materials Corp". Syracuse.com. The Post-Standard. 2009. Retrieved August 2, 2014.
  8. ^ a b c d e Schramm, Carl, great-grandson of a Sanderson mill superintendent (June 1, 2014). "Why Immigration Is Crucial To The Revival Of America's Cities". Forbes. Retrieved August 5, 2014.((cite web)): CS1 maint: multiple names: authors list (link)
  9. ^ a b c d Morrison, Janna (April 8, 2010). "Crucible Industries and Latrobe Specialty Steel Distribution Announce Partnership". FabricatingAndMetalWorking.com. Retrieved August 2, 2014.
  10. ^ a b c d Gilmer, Harrison (March 1953). "Birth of the American Crucible Steel Industry". Pennsylvania Historical Magazine. 36 (1): 17–36. Retrieved August 2, 2014.
  11. ^ a b "Crucible Steel, A technology war baby whose products are too numerous to count...". Vol. XX, no. 5. Fortune magazine. November 1939. p. 75.
  12. ^ a b c Inman, Donald. "Jones & Laughlin Steel". ReoCities.com. Beaver County Industrial Museum, Geneva College, Beaver Falls, Pennsylvania. Archived from the original on March 4, 2016. Retrieved August 4, 2014.
  13. ^ a b c d "Sanderson Brothers and Co, steel manufacturers of Sheffield". GracesCuide.co.uk. June 18, 2014. Retrieved August 2, 2014.
  14. ^ "Pittsburgh (Steel) Historical Marker, Behind the Marker". ExplorePAHistory.com. Retrieved August 2, 2014.
  15. ^ a b Union Trust Company of America announcement (July 8, 1900). "Crucible Steel Company of America, Underwriting Privilege". The Sun, New York.
  16. ^ a b Historic England (May 17, 2007). "Former Sanderson's Darnall Steelworks and Don Valley Glassworks, Darnall Road, monument (1021424)". National Heritage List for England. Retrieved August 8, 2014.
  17. ^ a b Clayton, professor, W. W. (1878). "History of Geddes, NY". Rays-Place.com. D. Mason & Co., Syracust NY. Retrieved August 8, 2014.
  18. ^ a b Kaufmann, Dwight W. (1986). Crucible, The Story of a Steel Company.
  19. ^ Univ. of Toronto, Dept of Matallurgical Engineering (January 1, 1927). "The Crucible Steel Company of America". US.Archive.org. The Iron and Steel magazine. Retrieved August 8, 2014.
  20. ^ Fruehan, Richard J., editor; 20+ authors. "The Making, Shaping and Treating of Steel". Scribd.com. AISE Steel Foundation, Pittsburgh, PA. Archived from the original on March 5, 2016. Retrieved August 8, 2014. ((cite web)): |last1= has generic name (help)CS1 maint: multiple names: authors list (link) CS1 maint: numeric names: authors list (link)
  21. ^ "Halcomb Steel Company". Syracuse Herald. Syracuse, New York. April 21, 1913.
  22. ^ "The Iron Age". The Iron Age. 91 (12–18): 970. April 17, 1913.
  23. ^ Kennedy, Richard; Roberts, George Adam (1998). Tool Steels (5th ed.). Materials Park, OH: ASM International. ISBN 1615032010.((cite book)): CS1 maint: multiple names: authors list (link)
  24. ^ a b c Boccalini, M.; H. Goldenstein (February 2001). "Solidification of high speed steels" (PDF). International Materials Reviews. 46 (2): 92–107. Bibcode:2001IMRv...46...92B. doi:10.1179/095066001101528411. ISSN 0950-6608. S2CID 138926712. Archived from the original (PDF) on 2014-11-19. Retrieved 2014-08-08.
  25. ^ "Big New Steel Plant; $7,500,000 Undertaking of Crucible Steel Company Near Pittsburg". The New York Times. January 26, 1911. Retrieved August 4, 2014.
  26. ^ Product Catalog, 1913 Edition, with a picture of the Sanderson works at Syracuse, New York.
  27. ^ a b c d "Crucible's New World". Newsweek. May 30, 1949.
  28. ^ a b Desvernine, Raoul Eugene (January 1, 1936). Democratic Despotism. New York: Dodd, Mead and Co. ASIN B000TCIHMC. OCLC 637523. Retrieved August 4, 2014.
  29. ^ "A Pittsburgh Century (cont.), 1946–1960". Post-Gazette.com/. Pittsburgh Post-Gazette. Retrieved August 5, 2014.
  30. ^ "Happy Ending, Crucible Steel gains goodwill by dropping "escape" clause". Business Week. February 24, 1951.
  31. ^ Farol Metcalf, James. "Induction Heating, Molten Metal Eats Through and Explodes". Electric-History.com. Retrieved August 2, 2014.
  32. ^ "Colt Steel begins closing its Crucible Steel Plant laying off 400". PittsburghWorldHerald.com. Pittsburgh World Herald. 1982. Retrieved August 8, 2014.
  33. ^ Hannagan, Charley (May 2009). "Will bankruptcy give Crucible Materials Corp enough breathing room?". Syracuse.com. The Post-Standard. Retrieved August 2, 2014.
  34. ^ a b c Hannagan, Charley (January 2010). "Crucible Industries LLC in Geddes partners with Pennsylvania steel firm". Syracuse.com. The Post-Standard. Retrieved August 2, 2014.
  35. ^ Hannagan, Charley (November 2009). "Crucible Industries LLC ships first steel forged under new ownership". Syracuse.com. The Post-Standard. Retrieved August 2, 2014.
  36. ^ "Crucible, Latrobe Specialty Steel Distribution Partner Up". IndustrialHeating.com. January 14, 2010. Retrieved August 2, 2014.
  37. ^ "Model PT, CPM-S30V Powder Steel (Stainless)". StriderKnives.com. 2014. Retrieved August 3, 2014.
  38. ^ "Knife Features, Types of Blade Steels". BuckKnives.com. Retrieved July 14, 2014.
  39. ^ "Knife Blade Steels". KnifeSupply.com. Retrieved July 14, 2014.
  40. ^ "Knife Blade Steel Types". TheKnifeConnection.net. Retrieved July 14, 2014.
  41. ^ Covert, Pat (January 2011). "CPM S35VN: Next Gen Exotic". Tactical-Life.com. Retrieved July 15, 2014.
  42. ^ Hollis, Durwood (January 2011). "Steel, Steel, Everywhere! But Are You Choosing The Right Steel For You?". Guns magazine. Archived from the original on August 11, 2014. Retrieved July 15, 2014.
  43. ^ "Fusionwood 2.0 Blade Design". NewWestKnifeWorks.com. 2014. Retrieved July 15, 2014.
  44. ^ Reed, J.D. (July 14, 1980). "On The Cutting Edge". Sports Illustrated. Retrieved October 3, 2011.
  45. ^ Kertzman, Joe (2002). Sporting Knives: Folders, Fixed Blades, Pocket, Military, Gent's Knives, Multi-Tools, Swords (2 ed.). Krause Publications. p. 66. ISBN 978-0-87349-430-4.
  46. ^ Gromer, Cliff (2002). "Art on the Cutting Edge". Field & Stream. 179 (6): 46.
  47. ^ Delavigne, Kenneth (2004). Spyderco Story: The New Shape of Sharp. Colorado: Paladin Press. ISBN 1-58160-060-7.
  48. ^ Pacella, Gerard (2002). 100 Legendary Knives, Iola, USA. Krause Publications. p. 145. ISBN 0-87349-417-2.
  49. ^ Ewing, Dexter (2013). "Factories Drink From the Custom Maker Well". In Joe Kertzman (ed.). Knives 2014: The World's Greatest Knife Book (34 ed.). Iola, Wisconsin: F+W Media. pp. 42–46. ISBN 978-1-4402-3700-3.
  50. ^ Dockery, Kevin (2004). Weapons of the Navy SEALs. California: Berkeley Hardcover. pp. 23–24. ISBN 0-425-19834-0.
  51. ^ Chris DiStefano; Leopold Ketel (May 17, 2005). "Benchmade Wins 2005 Knife of the Year Award". Press releases. Archived from the original on May 8, 2014. Retrieved August 1, 2014.
  52. ^ "Knife of the Year Award". ShootingIndustry.com. Shooting Industry. Retrieved August 7, 2014.
  53. ^ Pacella, Gerard (2002). 100 Legendary Knives. Krause Publications. p. 126. ISBN 0-87349-417-2.
  54. ^ Mickadeit, Frank (September 10, 2009). "Phill, Phil want Marines to be sharp". Orange County Register. Retrieved August 3, 2014.
  55. ^ Hartsfield, Phill (1995), "Live Swords", International Shinkendo Newsletter Volume 1, Issue 3.
  56. ^ Dumm, Chris (January 27, 2014). "Knife Review: Kershaw Blur S30V". Retrieved August 2, 2010.
  57. ^ a b "CPM S30V Data Sheet" (PDF). Crucible Industries LLC. Archived from the original (PDF) on July 8, 2011. Retrieved August 2, 2014.
  58. ^ "CPM S35V Data Sheet" (PDF). Crucible Industries LLC. Retrieved August 2, 2014.
  59. ^ "Crucible 154CM Data Sheet" (PDF). Crucible Industries LLC. Retrieved August 3, 2014.
  60. ^ "Crucible A2 Data Sheet" (PDF). Crucible. Retrieved July 14, 2014.
  61. ^ a b Verhoeven, John D. (2007). Steel Metallurgy for the non-Metallurgist. ASM International. ISBN 9781615030569.
  62. ^ John A. Ricketts, Ispat Inland, Inc.; ATSI Engineering Services, "An Introduction to Blast Furnace Technology" (2014). "How A Blast Furnace Works". American Iron and Steel Institute. Archived from the original on December 9, 2014. Retrieved August 2, 2014.((cite web)): CS1 maint: multiple names: authors list (link)
  63. ^ Gathmann of Baltimore, Maryland, Emil (March 25, 1919). "Teeming ingot-molds". Retrieved August 2, 2014.
  64. ^ Barney, Richard W.; Loveless, Robert W. (1995). How to Make Knives. Krause Publications, Inc. ISBN 978-0873413893. Retrieved August 8, 2014.
  65. ^ Desvernine, Raoul Eugene (May 1, 2006). Democratic Despotism, reprint. New York: Kessinger Publishing. ISBN 9781428613676. Retrieved August 4, 2014.

Bibliography

External links

Iron and steel production
Categories