You do not have permission to edit this page, for the following reasons:

This IP address has been blocked from editing Wikipedia.
This does not affect your ability to read Wikipedia pages.
Most people who see this message have done nothing wrong. Some kinds of blocks restrict editing from specific service providers or telecom companies in response to recent abuse or vandalism, and can sometimes affect other users who are unrelated to that abuse. Review the information below for assistance if you do not believe that you have done anything wrong.

The IP address or range 44.201.0.0/16 has been blocked (disabled) by ‪ST47‬ for the following reason(s):

The IP address that you are currently using has been blocked because it is believed to be a web host provider. To prevent abuse, web hosts may be blocked from editing Wikipedia.
You will not be able to edit Wikipedia using a web host provider because it hides your IP address, much like a proxy or VPN.
We recommend that you attempt to use another connection to edit. For example, if you use a proxy or VPN to connect to the internet, turn it off when editing Wikipedia. If you edit using a mobile connection, try using a Wi-Fi connection, and vice versa. If you are using a corporate internet connection, switch to a different Wi-Fi network. If you have a Wikipedia account, please log in.
If you do not have any other way to edit Wikipedia, you will need to request an IP block exemption.

How to appeal if you are confident that your connection does not use a web host's IP address:
If you are confident that you are not using a web host, you may appeal this block by adding the following text on your talk page: ((unblock|reason=Caught by a web host block but this host or IP is not a web host. My IP address is _______. Place any further information here. ~~~~)). You must fill in the blank with your IP address for this block to be investigated. Your IP address can be determined here. Alternatively, if you wish to keep your IP address private you can use the unblock ticket request system. There are several reasons you might be editing using the IP address of a web host (such as if you are using VPN software or a business network); please use this method of appeal only if you think your IP address is in fact not a web host.

Administrators: The IP block exemption user right should only be applied to allow users to edit using web host in exceptional circumstances, and they should usually be directed to the functionaries team via email. If you intend to give the IPBE user right, a CheckUser needs to take a look at the account. This can be requested most easily at SPI Quick Checkuser Requests. Unblocking an IP or IP range with this template is highly discouraged without at least contacting the blocking administrator.

This block will expire on 23:54, 31 July 2024.

Even when blocked, you will usually still be able to edit your user talk page, as well as email administrators and other editors.

For information on how to proceed, please read the FAQ for blocked users and the guideline on block appeals. The guide to appealing blocks may also be helpful.

Other useful links: Blocking policy · Help:I have been blocked
Your IP address is in a range that has been blocked on all Wikimedia Foundation wikis. The block was made by ‪AntiCompositeNumber‬. The reason given is Open proxy/Webhost: Visit the FAQ if you are affected .
- Start of block: 13:55, 18 August 2022
- Expiry of block: 13:55, 18 April 2025
Your current IP address is 44.201.28.123. The blocked range is 44.201.0.0/16. Please include all above details in any queries you make. If you believe you were blocked by mistake, you can find additional information and instructions in the No open proxies global policy. Otherwise, to discuss the block please post a request for review on Meta-Wiki. You could also send an email to the stewards VRT queue at stewards@wikimedia.org including all above details.

You can view and copy the source of this page:

((more citations needed|date=May 2011))
[[Image:Transistor curve tracer.jpg|thumb|right|''The Type 575 Transistor-Curve Tracer displays the dynamic characteristic curves of both NPN and PNP transistors on the screen of a 5-inch cathode-ray tube. Several different transistor characteristic curves may be displayed, including the [[collector family]] in the common-base and common emitter configuration. In addition to the transistor characteristic curves, the Type 575 is used to display dynamic characteristics of a wide range of semiconductor devices." (Tektronix, Catalog, 1967)]]

A '''curve tracer''' is a specialised piece of [[electronic test equipment]] used to analyze the characteristics of discrete [[electronic component]]s, such as [[diode]]s, [[transistor]]s, [[thyristor]]s, and [[vacuum tube]]s. The device contains [[voltage]] and [[current source]]s that can be used to stimulate the [[device under test]] (DUT).

== Operation ==
The function is to apply a swept (automatically continuously varying with time) voltage to two terminals of the device under test and measure the amount of current that the device permits to flow at each voltage. This so-called I–V (current versus voltage) data is either directly displayed on an oscilloscope screen, or recorded to a data file for later processing and graphing with a computer.<ref>((cite web|title=The pypsucurvetrace curve tracer|url=http://pypsucurvetrace.readthedocs.io))</ref> Configuration includes the maximum voltage applied, the polarity of the voltage applied (including the automatic application of both positive and negative polarities), and the resistance inserted in series with the device. The main terminal voltage can often be swept up to several thousand volts, with load currents of tens of amps available at lower voltages.

For two-terminal devices (such as diodes and [[DIAC]]s), this is sufficient to fully characterize the device. The curve tracer can display all of the interesting parameters such as the diode's forward voltage, [[reverse leakage current]], reverse breakdown voltage, and so on. For triggerable devices such as DIACs, the forward and reverse trigger voltages will be clearly displayed. The discontinuity caused by [[negative resistance]] devices (such as [[tunnel diode]]s) can also be seen. This is a method for finding electrically damaged pins on [[integrated circuit]] devices.<ref>((cite web|title=Curve Tracing Solutions|url=http://www.testfixtures.com/curve-tracing|website=RTI|publisher=RTI))</ref>

For three-terminal devices (such as [[transistors]]) a connection to the control terminal of the device being tested is used, such as the Base or Gate terminal. For BJT transistors and other current-controlled devices, the base or other control terminal current is stepped. For FETs or other voltage-controlled devices, a stepped voltage is used instead. By sweeping the voltage through the configured range of main terminal voltages, for each voltage step of the control signal, a group of I–V curves is generated automatically. This group of curves makes it very easy to determine the gain of a transistor, or the trigger voltage of a thyristor or [[TRIAC]].

== Test Device Connection ==
Curve tracers usually contain convenient connection arrangements for two- or three-terminal devices, often in the form of sockets arranged to allow the plugging-in of the various common packages used for electronic components. Most curve tracers also allow the simultaneous connection of two DUTs; in this way, two DUTs can be "matched" for optimum performance in circuits (such as [[differential amplifier]]s) which depend upon the close matching of device parameters. This can be seen in the adjacent image where a toggle switch allows the rapid switching between the DUT on the left and the DUT on the right as the operator compared the respective curve families of the two devices.

I–V curves are used to characterize devices and materials through DC source-measure testing. These applications may also require the calculation of resistance and the derivation of other parameters based on I–V measurements. For example, I–V data can be used to study anomalies, locate maximum or minimum curve slopes, and perform reliability analyses. A typical application is finding a semiconductor diode's reverse bias leakage current and doing forward and reverse bias voltage sweeps and current measurements to generate its I–V curve.<ref>((cite web |url=http://www.microwaves101.com/encyclopedia/curvetracer.cfm |title=Curve Tracer Measurements - Microwave Encyclopedia - Microwaves101.com |website=www.microwaves101.com |url-status=dead |archive-url=https://web.archive.org/web/20051217195620/http://microwaves101.com/encyclopedia/curvetracer.cfm |archive-date=2005-12-17)) </ref>

=== Kelvin sensing ===
Curve tracers, especially high-current models, are usually supplied with various semiconductor device test fixture adapters [https://web.archive.org/web/20080404034202/http://www.tek.com/site/ps/0,,76-15104-INTRO_EN,00.html] that have [[Four-terminal sensing|Kelvin sensing]].

=== Capacitive balance control ===
Some analog curve tracers, especially sensitive low-current models, are equipped with manual control for balancing a capacitive [[Bridge circuit]] for compensating ("nulling") the stray capacitances of the test setup. This adjustment is performed by tracing the curve of the empty test setup (with all required cables, probes, adapters, and other auxiliary devices connected, but without the DUT) and adjusting the balance control until the I curve is displayed at a constant zero level.

=== I–V Curve Tracing ===
I–V curve tracing is a method of analyzing the performance of a [[Photovoltaic system]], ideal for testing all the possible operating points of a PV module or string of modules.<ref>((cite web|title=I-V Curve Tracing Exercises for the PV Training Lab|url=http://resources.solmetric.com/get/I-V-Curve-Tracing-Exercises-for-the-Outdoor-PV-Training-Lab.pdf|website=Solmetric|publisher=Solmetric))</ref>

== History ==
Before the introduction of semiconductors, there were [[vacuum tube]] curve tracers (e.g., Tektronix 570). Early semiconductor curve tracers themselves used vacuum tube circuits, as semiconductor devices then available could not do everything required in a curve tracer.
The [[Tektronix]] model 575 curve tracer shown in the gallery was a typical early instrument.

Nowadays, curve tracers are entirely [[Solid state (electronics)|solid state]] and are substantially automated to ease the workload of the operator, automatically capture data, and assure the safety of the curve tracer and the DUT.

Recent developments in curve tracer systems now allow three core types of curve tracing: current–voltage (I–V), capacitance-voltage (C-V), and ultra-fast transient or pulsed current–voltage (I–V).  Modern curve tracer instrument designs tend to be modular, allowing system specifiers to configure them to match the applications for which they will be used. For example, new mainframe-based curve tracer systems can be configured by specifying the number and power level of the [[Source measure unit|Source Measure Units]] (SMUs) to be plugged into the slots in the back panel of the chassis. This modular design also provides the flexibility to incorporate other types of instrumentation to handle a wider range of applications. These mainframe-based systems typically include a self-contained PC to simplify test setup, data analysis, graphing and printing, and onboard results storage. Users of these types of systems include semiconductor researchers, device modeling engineers, reliability engineers, die-sort engineers, and process development engineers.<ref>Keithley Instruments, Inc. The Challenge of Integrating Three Critical Semiconductor Measurement Types into a Single Instrument Chassis. http://www.keithley.com/data?asset=52840</ref>

In addition to mainframe-based systems, other curve tracer solutions are available that allow system builders to combine one or more discrete Source-Measure Units (SMUs) with a separate PC controller running curve tracer software.  Discrete SMUs offer a broader range of current, voltage, and power levels than mainframe-based systems permit and allow the system to be reconfigured as test needs change. New Wizard-based user interfaces have been developed to make it easy for students or less experienced industry users to find and run the tests they need, such as the FET curve trace test.<ref>Semiconductor Characterization Software offers parametric testing. (October 1, 2011) ThomasNet News. http://news.thomasnet.com/fullstory/Semiconductor-Characterization-Software-offers-parametric-testing-584774</ref>

== Safety ==

Some curve tracers, specifically those designed for high voltage or current or power devices, are capable of generating lethal voltages and currents and so pose an [[electric shock|electrocution]] hazard for the operator. Modern curve tracers often contain mechanical shields and [[Interlock (engineering)|interlocks]] that make it more difficult for the operator to come into contact with hazardous voltages or currents. Power DUTs can become dangerously hot during testing.  Inexpensive curve tracers cannot test such devices and are less likely to be lethally dangerous.

<gallery>
Image:Transistor curve tracer detail1.jpg|''Transistor-curve tracer'' (detail 1)
Image:Transistor curve tracer detail2.jpg|''Transistor-curve tracer'' (detail 2)
Image:Transistor curve tracer parts.jpg|''Transistor-curve tracer'' (parts)
</gallery>

== References ==
((Reflist))

==External links==
* [http://www.chiark.greenend.org.uk/scopes/tek.html The Museum of Tektronix Scopes]
* [http://www.etesters.com/see/Curve_Tracers All manufacturers of curve tracers.]
* [http://www.changpuak.ch/electronics/Curve_Tracer_advanced.php A homebrew Curve Tracer.]

[[Category:Electronic test equipment]]
[[Category:Laboratory equipment]]
[[Category:Electronics work tools]]

Pages transcluded onto the current version of this page (help):

Curve tracer (edit)
Template:Ambox (view source) (template editor protected)
Template:Cite web (view source) (protected)
Template:Find sources mainspace (view source) (template editor protected)
Template:Main other (view source) (protected)
Template:More citations needed (view source) (template editor protected)
Template:Reflist (view source) (protected)
Template:Reflist/styles.css (view source) (protected)
Module:Arguments (view source) (protected)
Module:Category handler (view source) (protected)
Module:Category handler/blacklist (view source) (protected)
Module:Category handler/config (view source) (protected)
Module:Category handler/data (view source) (protected)
Module:Category handler/shared (view source) (protected)
Module:Check for unknown parameters (view source) (protected)
Module:Citation/CS1 (view source) (protected)
Module:Citation/CS1/COinS (view source) (protected)
Module:Citation/CS1/Configuration (view source) (protected)
Module:Citation/CS1/Date validation (view source) (protected)
Module:Citation/CS1/Identifiers (view source) (protected)
Module:Citation/CS1/Utilities (view source) (protected)
Module:Citation/CS1/Whitelist (view source) (protected)
Module:Citation/CS1/styles.css (view source) (protected)
Module:Find sources (view source) (template editor protected)
Module:Find sources/config (view source) (template editor protected)
Module:Find sources/links (view source) (template editor protected)
Module:Find sources/templates/Find sources mainspace (view source) (template editor protected)
Module:Message box (view source) (protected)
Module:Message box/ambox.css (view source) (protected)
Module:Message box/configuration (view source) (protected)
Module:Namespace detect/config (view source) (protected)
Module:Namespace detect/data (view source) (protected)
Module:Unsubst (view source) (protected)
Module:Yesno (view source) (protected)

Return to Curve tracer.

Retrieved from "https://en.wikipedia.org/wiki/Curve_tracer"