Deep learning super sampling (DLSS) is a family of real-time deep learning image enhancement and upscaling technologies developed by Nvidia that are exclusive to its RTX line of graphics cards,[1] and available in a number of video games. The goal of these technologies is to allow the majority of the graphics pipeline to run at a lower resolution for increased performance, and then infer a higher resolution image from this that approximates the same level of detail as if the image had been rendered at this higher resolution. This allows for higher graphical settings and/or frame rates for a given output resolution, depending on user preference.[2]
As of September 2022, the 1st and 2nd generation of DLSS is available on all RTX branded cards from Nvidia in supported titles, while the 3rd generation unveiled at Nvidia's GTC 2022 event is exclusive to Ada Lovelace generation RTX 40 series graphics cards.[3] Nvidia has also introduced Deep learning dynamic super resolution (DLDSR), a related and opposite technology where the graphics are rendered at a higher resolution, then downsampled to the native display resolution using an AI-assisted downsampling algorithm to achieve higher image quality than rendering at native resolution.[4]
Nvidia advertised DLSS as a key feature of the GeForce 20 series cards when they launched in September 2018.[5] At that time, the results were limited to a few video games (namely Battlefield V[6] and Metro Exodus) because the algorithm had to be trained specifically on each game on which it was applied and the results were usually not as good as simple resolution upscaling.[7][8]
In 2019, the video game Control shipped with ray tracing and an improved version of DLSS, which did not use the Tensor Cores.[9][10]
In April 2020, Nvidia advertised and shipped an improved version of DLSS named DLSS 2.0 with driver version 445.75. DLSS 2.0 was available for a few existing games including Control and Wolfenstein: Youngblood, and would later be added to many newly released games and game engines such as Unreal Engine[11] and Unity.[12] This time Nvidia said that it used the Tensor Cores again, and that the AI did not need to be trained specifically on each game.[5][13] Despite sharing the DLSS branding, the two iterations of DLSS differ significantly and are not backwards-compatible.[14][15]
| Release | Release date | Highlights |
|---|---|---|
| 1.0 | February 2019 | Predominantly spatial image upscaler, required specifically trained for each game integration, included in Battlefield V and Metro Exodus, among others[6] |
| "1.9" (unofficial name) | August 2019 | DLSS 1.0 adapted for running on the CUDA shader cores instead of tensor cores, used for Control[9][5][16] |
| 2.0 | April 2020 | An AI accelerated form of TAAU using Tensor Cores, and trained generically[17] |
| 3.0 | September 2022 | DLSS 3.0, augmented with an optical flow frame-generation algorithm (only available on RTX 40-series GPUs) to double framerate[3][18] |
| 3.5 | September 2023 | DLSS 3.5 adds ray reconstruction, replacing multiple denoising algorithms with a single AI model trained on five times more data than DLSS 3.[19][18] |
| Quality preset[a] | Scale factor[b] | Render scale[c] |
|---|---|---|
| Ultra Quality unused | 1.32x | 76.0% |
| Quality | 1.50x | 66.7% |
| Balanced | 1.72x | 58.0% |
| Performance | 2.00x | 50.0% |
| Ultra Performance since v2.1 | 3.00x | 33.3% |
The first iteration of DLSS is a predominantly spatial image upscaler with two stages, both relying on convolutional auto-encoder neural networks.[21] The first step is an image enhancement network which uses the current frame and motion vectors to perform edge enhancement, and spatial anti-aliasing. The second stage is an image upscaling step which uses the single raw, low-resolution frame to upscale the image to the desired output resolution. Using just a single frame for upscaling means the neural network itself must generate a large amount of new information to produce the high resolution output, this can result in slight hallucinations such as leaves that differ in style to the source content.[14]
The neural networks are trained on a per-game basis by generating a "perfect frame" using traditional supersampling to 64 samples per pixel, as well as the motion vectors for each frame. The data collected must be as comprehensive as possible, including as many levels, times of day, graphical settings, resolutions etc. as possible. This data is also augmented using common augmentations such as rotations, colour changes, and random noise to help generalize the test data. Training is performed on Nvidia's Saturn V supercomputer.[15][22]
This first iteration received a mixed response, with many criticizing the often soft appearance and artifacting in certain situations;[23][7][6] likely a side effect of the limited data from only using a single frame input to the neural networks which could not be trained to perform optimally in all scenarios and edge-cases.[14][15]
Nvidia also demonstrated the ability for the auto-encoder networks to learn the ability to recreate depth-of-field and motion blur,[15] although this functionality has never been included in a publicly released product. [citation needed]
DLSS 2.0 is a temporal anti-aliasing upsampling (TAAU) implementation, using data from previous frames extensively through sub-pixel jittering to resolve fine detail and reduce aliasing. The data DLSS 2.0 collects includes: the raw low-resolution input, motion vectors, depth buffers, and exposure / brightness information.[14] It can also be used as a simpler TAA implementation where the image is rendered at 100% resolution, rather than being upsampled by DLSS, Nvidia brands this as DLAA (Deep Learning Anti-Aliasing).[24]
TAA(U) is used in many modern video games and game engines,[25] however all previous implementations have used some form of manually written heuristics to prevent temporal artifacts such as ghosting and flickering. One example of this is neighborhood clamping which forcefully prevents samples collected in previous frames from deviating too much compared to nearby pixels in newer frames. This helps to identify and fix many temporal artifacts, but deliberately removing fine details in this way is analogous to applying a blur filter, and thus the final image can appear blurry when using this method.[14]
DLSS 2.0 uses a convolutional auto-encoder neural network[23] trained to identify and fix temporal artifacts, instead of manually programmed heuristics as mentioned above. Because of this, DLSS 2.0 can generally resolve detail better than other TAA and TAAU implementations, while also removing most temporal artifacts. This is why DLSS 2.0 can sometimes produce a sharper image than rendering at higher, or even native resolutions using traditional TAA. However, no temporal solution is perfect, and artifacts (ghosting in particular) are still visible in some scenarios when using DLSS 2.0.
Because temporal artifacts occur in most art styles and environments in broadly the same way, the neural network that powers DLSS 2.0 does not need to be retrained when being used in different games. Despite this, Nvidia does frequently ship new minor revisions of DLSS 2.0 with new titles,[26] so this could suggest some minor training optimizations may be performed as games are released, although Nvidia does not provide changelogs for these minor revisions to confirm this.
The main advancements compared to DLSS 1.0 include: Significantly improved detail retention, a generalized neural network that does not need to be re-trained per-game, and ~2x less overhead (~1-2 ms vs ~2-4 ms).[14]
It should also be noted that forms of TAAU such as DLSS 2.0 are not upscalers in the same sense as techniques such as ESRGAN or DLSS 1.0, which attempt to create new information from a low-resolution source; instead TAAU works to recover data from previous frames, rather than creating new data. In practice, this means low resolution textures in games will still appear low-resolution when using current TAAU techniques. This is why Nvidia recommends game developers use higher resolution textures than they would normally for a given rendering resolution by applying a mip-map bias when DLSS 2.0 is enabled.[14]
Augments DLSS 2.0 by making use of motion interpolation. The DLSS frame generation algorithm takes two rendered frames from the rendering pipeline, and generates a new frame that smoothly transitions between them. So for every frame rendered, one additional frame is generated.[3]
DLSS 3.0 makes use of a new generation Optical Flow Accelerator (OFA) included in Ada Lovelace generation RTX GPUs. The new OFA is faster and more accurate than the OFA already available in previous Turing and Ampere RTX GPUs.[27] This results in DLSS 3.0 being exclusive for the RTX 40 Series.
At release, DLSS 3.0 does not work for VR displays.[citation needed]
DLSS 3.5 adds ray reconstruction, replacing multiple denoising algorithms with a single AI model trained on five times more data than DLSS 3. Ray reconstruction will be available on all RTX GPUs and will first target games with path tracing (aka "full ray tracing"), including Cyberpunk 2077's Phantom Liberty DLC, Portal with RTX, and Alan Wake 2.[19][18]
DLSS requires and applies its own anti-aliasing method.
It operates on similar principles to TAA. Like TAA, it uses information from past frames to produce the current frame. Unlike TAA, DLSS does not sample every pixel in every frame. Instead, it samples different pixels in different frames and uses pixels sampled in past frames to fill in the unsampled pixels in the current frame. DLSS uses machine learning to combine samples in the current frame and past frames, and it can be thought of as an advanced and superior TAA implementation made possible by the available tensor cores.[14]
Nvidia offers deep learning anti-aliasing (DLAA). DLAA provides the same AI-driven anti-aliasing DLSS uses, but without any upscaling or downscaling functionality.
With the exception of the shader-core version implemented in Control, DLSS is only available on GeForce RTX 20, GeForce RTX 30, GeForce RTX 40, and Quadro RTX series of video cards, using dedicated AI accelerators called Tensor Cores.[23][failed verification] Tensor Cores are available since the Nvidia Volta GPU microarchitecture, which was first used on the Tesla V100 line of products.[28] They are used for doing fused multiply-add (FMA) operations that are used extensively in neural network calculations for applying a large series of multiplications on weights, followed by the addition of a bias. Tensor cores can operate on FP16, INT8, INT4, and INT1 data types. Each core can do 1024 bits of FMA operations per clock, so 1024 INT1, 256 INT4, 128 INT8, and 64 FP16 operations per clock per tensor core, and most Turing GPUs have a few hundred tensor cores.[29]
The Tensor Cores use CUDA Warp-Level Primitives on 32 parallel threads to take advantage of their parallel architecture.[30] A Warp is a set of 32 threads which are configured to execute the same instruction.
