Diphenylchloroarsine (DA) is the organoarsenic compound with the formula (C6H5)2AsCl. It is highly toxic and was once used in chemical warfare. It is also an intermediate in the preparation of other organoarsenic compounds. The molecule consists of a pyramidal As(III) center attached to two phenyl rings and one chloride. It was also known as sneezing oil during World War I by the Allies.
Preparation and structure
It was first produced in 1878 by the German chemists August Michaelis (1847–1916) and Wilhelm La Coste (1854–1885).[1][2] It is prepared by the reduction of diphenylarsinic acid with sulfur dioxide. An idealized equation is shown:[3]
The German process, used in the first war, applied at Hochstam-Main, used the Sandmeyer reaction between phenyldiazonium chloride and sodium arsenite. The acidified product was reduced and then neutralized. The salt was condensed again by the Sandmeyer reaction and reduced again, the final product was then acidified, resulting in DA.[5]
The structure consists of pyramidal As centre. The As-Cl distance is 2.26 A and the Cl-As-C and C-As-C angles are 96 and 105°, respectively.[6]
Uses
It is a useful reagent for the preparation of other diphenylarsenic compounds, e.g. by reactions with Grignard reagents:
Diphenylchlorarsine was used as a chemical weapon on the Western front during the trench warfare of World War I.[7] It belongs to the class of chemicals classified as vomiting agents. Other such agents are diphenylcyanoarsine (DC) and diphenylaminechlorarsine (DM, Adamsite).[8] Diphenylchlorarsine was sometimes believed to penetrate the gas masks of the time and to cause violent sneezing, forcing removal of the protecting device. The Germans called it Maskenbrecher (mask breaker), together with other substances with similar effects, such as Adamsite, diphenylarsincyanide, and diphenylaminarsincyanide.[citation needed] This gas did not actually penetrate masks any better than other gases.[9]
DA (military code and acronym for diphenylchloroarsine) is a precursor to DC (diphenylcyanoarsine), generated by the reaction of an aqueous solution of sodium cyanide and DA (DC process, NaCN method), with cyanide being used in excess of 5%, for military purposes.[5]
^As early as 1875, Michaelis found diphenylchlorarsine as a side-product in a reaction to produce monophenylarsenic chloride: Michaelis, A. (1875). "Ueber aromatische Arsenverbindungen" [On aromatic arsenic compounds]. Berichte der Deutschen Chemischen Gesellschaft (in German). 8 (2): 1316–1317. doi:10.1002/cber.187500802125. From p. 1317: "Der zweite neben Phenylarsenchlorid gebildete weisse Körper ist noch nicht untersucht, er ist wahrscheinlich Diphenylarsenchlorid, … " (The second white substance that formed beside phenylarsenic chloride has still not been investigated, it's probably diphenylarsenic chloride, … ) In 1878, Michaelis confirmed that it was indeed diphenylarsenic chloride.(La Coste & Michaelis, 1878), p. 1885
^Blicke, F. F.; Smith, F. D. (1929). "Action of Aromatic Grignard Reagents on Arsenic Trioxide". Journal of the American Chemical Society. 51 (5): 1558–1565. doi:10.1021/ja01380a038.
