| Development | |
|---|---|
| Designer | E. G. van de Stadt |
| Location | Belgium |
| Year | 1974 |
| No. built | 1830 |
| Builder(s) | ETAP Yachting |
| Name | EATP 22 |
| Boat | |
| Displacement | 2,756 lb (1,250 kg) |
| Draft | 4.10 ft (1.25 m) |
| Hull | |
| Type | monohull |
| Construction | glassfibre |
| LOA | 21.65 ft (6.60 m) |
| LWL | 18.70 ft (5.70 m) |
| Beam | 7.87 ft (2.40 m) |
| Hull appendages | |
| Keel/board type | lifting keel |
| Ballast | 1,213 lb (550 kg) |
| Rudder(s) | transom-mounted rudder |
| Rig | |
| Rig type | Bermuda rig |
| Sails | |
| Sailplan | fractional rigged sloop |
| Total sail area | 215.00 sq ft (19.974 m2) |
ETAP 22i →
| |
The EATP 22 is a Belgian trailerable sailboat that was designed by E. G. van de Stadt as a cruiser and first built in 1974.[1][2]
The design was the first boat built by ETAP Yachting in Belgium. It was built between 1974 and 1984, with 1830 boats completed, but it is now out of production.[1][3]
The EATP 22 is a recreational keelboat, built predominantly of glassfibre and features a flush deck design. It has a fractional sloop rig, a raked stem, a plumb transom, a transom-hung rudder controlled by a tiller and a lifting keel or optional centreboard. It displaces 2,756 lb (1,250 kg) and carries 1,213 lb (550 kg) of ballast.[1]
The lifting keel equipped model has a draft of 4.10 ft (1.25 m) with the keel fully down, while the centreboard model has a draft of 4.92 ft (1.50 m) with the centreboard extended and 2.3 ft (0.70 m) with it retracted, allowing ground transportation on a trailer.[1]
For downwind sailing the design may be equipped with a spinnaker.[1]
The boat was at one time supported by a class club, the ETAP Owners Association.[4]