You do not have permission to edit this page, for the following reasons:

This IP address has been blocked from editing Wikipedia.
This does not affect your ability to read Wikipedia pages.
Most people who see this message have done nothing wrong. Some kinds of blocks restrict editing from specific service providers or telecom companies in response to recent abuse or vandalism, and can sometimes affect other users who are unrelated to that abuse. Review the information below for assistance if you do not believe that you have done anything wrong.

The IP address or range 44.197.0.0/16 has been blocked (disabled) by ‪Blablubbs‬ for the following reason(s):

The IP address that you are currently using has been blocked because it is believed to be a web host provider or colocation provider. To prevent abuse, web hosts and colocation providers may be blocked from editing Wikipedia.
You will not be able to edit Wikipedia using a web host or colocation provider because it hides your IP address, much like a proxy or VPN.
We recommend that you attempt to use another connection to edit. For example, if you use a proxy or VPN to connect to the internet, turn it off when editing Wikipedia. If you edit using a mobile connection, try using a Wi-Fi connection, and vice versa. If you are using a corporate internet connection, switch to a different Wi-Fi network. If you have a Wikipedia account, please log in.
If you do not have any other way to edit Wikipedia, you will need to request an IP block exemption.

How to appeal if you are confident that your connection does not use a colocation provider's IP address:
If you are confident that you are not using a web host, you may appeal this block by adding the following text on your talk page: ((unblock|reason=Caught by a colocation web host block but this host or IP is not a web host. My IP address is _______. Place any further information here. ~~~~)). You must fill in the blank with your IP address for this block to be investigated. Your IP address can be determined here. Alternatively, if you wish to keep your IP address private you can use the unblock ticket request system. There are several reasons you might be editing using the IP address of a web host or colocation provider (such as if you are using VPN software or a business network); please use this method of appeal only if you think your IP address is in fact not a web host or colocation provider.

Administrators: The IP block exemption user right should only be applied to allow users to edit using web host in exceptional circumstances, and requests should usually be directed to the functionaries team via email. If you intend to give the IPBE user right, a CheckUser needs to take a look at the account. This can be requested most easily at SPI Quick Checkuser Requests. Unblocking an IP or IP range with this template is highly discouraged without at least contacting the blocking administrator.

This block will expire on 10:52, 20 August 2024.

Even when blocked, you will usually still be able to edit your user talk page, as well as email administrators and other editors.

For information on how to proceed, please read the FAQ for blocked users and the guideline on block appeals. The guide to appealing blocks may also be helpful.

Other useful links: Blocking policy · Help:I have been blocked
Your IP address is in a range that has been blocked on all Wikimedia Foundation wikis. The block was made by ‪AntiCompositeNumber‬. The reason given is Open proxy/Webhost: Visit the FAQ if you are affected .
- Start of block: 13:55, 18 August 2022
- Expiry of block: 13:55, 18 November 2024
Your current IP address is 44.197.119.13. The blocked range is 44.197.0.0/16. Please include all above details in any queries you make. If you believe you were blocked by mistake, you can find additional information and instructions in the No open proxies global policy. Otherwise, to discuss the block please post a request for review on Meta-Wiki. You could also send an email to the stewards VRT queue at stewards@wikimedia.org including all above details.

You can view and copy the source of this page:

((Short description|Technique for computing member forces and displacements in a structure))
((Refimprove|date=September 2014))
In [[structural engineering]], the '''flexibility method''', also called the '''method of consistent [[deformation (mechanics)|deformations]]''', is the traditional method for computing member forces and [[displacement (vector)|displacement]]s in structural systems. Its modern version formulated in terms of the members' flexibility [[matrix (mathematics)|matrices]] also has the name the '''matrix force method''' due to its use of member forces as the primary unknowns.<ref name=IUST>((cite web|title=Matrix Force method|url=http://www.iust.ac.ir/files/cefsse/pg.cef/Contents/force_method_ch6.pdf|publisher=IUST|access-date=29 December 2012))</ref>

==Member flexibility==
Flexibility is the inverse of [[stiffness]]. For example, consider a spring that has ''Q'' and ''q'' as, respectively, its force and deformation:
* The spring stiffness relation is ''Q = k q'' where ''k'' is the spring stiffness.
* Its flexibility relation is ''q = f Q'', where ''f'' is the spring flexibility.
* Hence, ''f'' = 1/''k''.

A typical member flexibility relation has the following general form:

((NumBlk|:|<math>\mathbf{q}^m = \mathbf{f}^m \mathbf{Q}^m + \mathbf{q}^{om}</math>|((EquationRef|1))))
where
:''m'' = member number ''m''.
:<math>\mathbf{q}^m </math> = vector of member's characteristic deformations.
:<math>\mathbf{f}^m </math> = member flexibility matrix which characterises the member's susceptibility to deform under forces.
:<math>\mathbf{Q}^m </math> = vector of member's independent characteristic forces, which are unknown internal forces. These independent forces give rise to all member-end forces by member equilibrium.
:<math>\mathbf{q}^{om} </math> = vector of member's characteristic deformations caused by external effects (such as known forces and temperature changes) applied to the isolated, disconnected member (i.e. with <math>\mathbf{Q}^m = 0 </math>).

For a system composed of many members interconnected at points called nodes, the members' flexibility relations can be put together into a single matrix equation, dropping the superscript m:

((NumBlk|:|<math>\mathbf{q}_{M \times 1} = \mathbf{f}_{M \times M} \mathbf{Q}_{M \times 1} + \mathbf{q}^{o}_{M \times 1} </math>|((EquationRef|2))))

where ''M'' is the total number of members' characteristic deformations or forces in the system.

Unlike the [[matrix stiffness method]], where the members' stiffness relations can be readily integrated via nodal equilibrium and compatibility conditions, the present flexibility form of equation (((EquationNote|2))) poses serious difficulty. With member forces <math> \mathbf{Q}_{M \times 1} </math> as the primary unknowns, the number of nodal equilibrium equations is insufficient for solution, in general—unless the system is [[statically determinate]].

==Nodal equilibrium equations==
To resolve this difficulty, first we make use of the nodal equilibrium equations in order to reduce the number of independent unknown member forces. The nodal equilibrium equation for the system has the form:

((NumBlk|:|<math>\mathbf{R}_{N \times 1} = \mathbf{b}_{N \times M} \mathbf{Q}_{M \times 1} + \mathbf{W}_{N \times 1} </math>|((EquationRef|3))))

where
: <math> \mathbf{R}_{N \times 1} </math>: Vector of nodal forces at all N [[degrees of freedom (engineering)|degrees of freedom]] of the system.
: <math> \mathbf{b}_{N \times M} </math>: The resulting nodal equilibrium matrix
: <math> \mathbf{W}_{N \times 1} </math>: The vector of forces arising from loading on the members.

In the case of determinate systems, matrix '''b''' is square and the solution for '''Q''' can be found immediately from (((EquationNote|3))) provided that the system is stable.

==The primary system==
For [[statically indeterminate]] systems, ''M'' > ''N'', and hence, we can augment (((EquationNote|3))) with ''I'' = ''M''−''N'' equations of the form:

((NumBlk|:|<math> X_i = \alpha Q_j + \beta Q_k + \cdots \qquad i=1,2,\ldots, I </math>|((EquationRef|4))))

The vector '''X''' is the so-called vector of [[redundancy (engineering)|redundant]] forces and ''I'' is the degree of statical indeterminacy of the system. We usually choose ''j'', ''k'', …, <math> \alpha </math>, and <math> \beta </math> such that <math> X_i </math> is a support reaction or an internal member-end force. With suitable choices of redundant forces, the equation system (((EquationNote|3))) augmented by (((EquationNote|4))) can now be solved to obtain:

((NumBlk|:|<math>\mathbf{Q}_{M \times 1} = \mathbf{B}_R \mathbf{R}_{N \times 1} + \mathbf{B}_X \mathbf{X}_{I \times 1} + \mathbf{Q}_{v \cdot M \times 1} </math>|((EquationRef|5))))

Substitution into (((EquationNote|2))) gives:

((NumBlk|:|<math>\mathbf{q}_{M \times 1} = \mathbf{f}_{M \times M}

\Big( \mathbf{B}_R \mathbf{R}_{N \times 1} + \mathbf{B}_X \mathbf{X}_{I \times 1} + \mathbf{Q}_{v \cdot M \times 1} \Big)
 + \mathbf{q}^{o}_{M \times 1} </math>|((EquationRef|6))))

Equations (((EquationNote|5))) and (((EquationNote|6))) are the solution for the ''primary system'' which is the original system that has been rendered statically determinate by cuts that expose the redundant forces <math>\mathbf{X} </math>. Equation (((EquationNote|5))) effectively reduces the set of unknown forces to <math>\mathbf{X} </math>.

==Compatibility equation and solution==
Next, we need to set up  <math> I </math>  compatibility equations in order to find <math>\mathbf{X} </math>. The compatibility equations restore the required continuity at the cut sections by setting the relative displacements <math>\mathbf{r}_{X}</math> at the redundants '''X''' to zero. That is, using the [[unit dummy force method]]:

((NumBlk|:|<math>\mathbf{r}_{X} = \mathbf{B}_X^T \mathbf{q} = \mathbf{B}_X^T \Big[ \mathbf{f}
\Big( \mathbf{B}_R \mathbf{R} + \mathbf{B}_X \mathbf{X} + \mathbf{Q}_v \Big) + \mathbf{q}^{o} \Big] = 0 </math>|((EquationRef|7a))))

((NumBlk|:|or  <math>\mathbf{r}_{X} = \mathbf{F}_{XX} \mathbf{X} + \mathbf{r}^o_X = 0 </math>|((EquationRef|7b))))
where
: <math> \mathbf{F}_{XX} = \mathbf{B}_X^T \mathbf{f} \mathbf{B}_X </math>

:<math> \mathbf{r}^o_X = \mathbf{B}_X^T \Big[ \mathbf{f}
\Big( \mathbf{B}_R \mathbf{R} + \mathbf{Q}_v \Big) + \mathbf{q}^{o} \Big] </math>

Equation (((EquationNote|7b))) can be solved for '''X''', and the member forces are next found from (((EquationNote|5))) while the nodal displacements can be found by

:<math>\mathbf{r}_{R} = \mathbf{B}_R^T \mathbf{q} = \mathbf{F}_{RR} \mathbf{R} + \mathbf{r}^o_R </math>

where
: <math> \mathbf{F}_{RR} = \mathbf{B}_R^T \mathbf{f} \mathbf{B}_R </math> is the ''system flexibility matrix''.

:<math> \mathbf{r}^o_R = \mathbf{B}_R^T \Big[ \mathbf{f}
\Big( \mathbf{B}_X \mathbf{X} + \mathbf{Q}_v \Big) + \mathbf{q}^{o} \Big] </math>

Supports' movements taking place at the redundants can be included in the right-hand-side of equation (((EquationNote|7))), while supports' movements at other places must be included in <math> \mathbf{r}^o_X </math> and <math> \mathbf{r}^o_R </math> as well.

==Advantages and disadvantages==
While the choice of redundant forces in (((EquationNote|4))) appears to be arbitrary and troublesome for automatic computation, this objection can be overcome by proceeding from (((EquationNote|3))) directly to (((EquationNote|5))) using a modified [[Gauss–Jordan elimination]] process. This is a robust procedure that automatically selects a good set of redundant forces to ensure numerical stability.

It is apparent from the above process that the matrix stiffness method is easier to comprehend and to implement for automatic computation. It is also easier to extend for advanced applications such as non-linear analysis, stability, vibrations, etc. For these reasons, the matrix stiffness method is the method of choice for use in general purpose structural analysis software packages. On the other hand, for linear systems with a low degree of statical indeterminacy, the flexibility method has the advantage of being computationally less intensive. This advantage, however, is a moot point as personal computers are widely available and more powerful. The main redeeming factor in learning this method nowadays is its educational value in imparting the concepts of equilibrium and compatibility in addition to its historical value. In contrast, the procedure of the direct stiffness method is so mechanical that it risks being used without much understanding of the structural behaviors.

The upper arguments were valid up to the late 1990s. However, recent advances in numerical computing have shown a comeback of the force method, especially in the case of nonlinear systems. New frameworks have been developed that allow "exact" formulations irrespectively of the type or nature of the system nonlinearities. The main advantages of the flexibility method is that the result error is independent of the discretization of the model and that it is indeed a very fast method. For instance, the elastic-plastic solution of a continuous beam using the force method requires only 4 beam elements whereas a commercial "stiffness based" [[Finite element method|FEM]] code requires 500 elements in order to give results with the same accuracy. To conclude, one can say that in the case where the solution of the problem requires recursive evaluations of the force field like in the case of structural optimization or [[system identification]], the efficiency of the flexibility method is indisputable.

==See also==
*[[Finite element method in structural mechanics]]
*[[Structural analysis]]
*[[Direct stiffness method|Stiffness method]]

==References==

((reflist))

==External links==
*[http://www.public.iastate.edu/~fanous/ce332/force/homepage.html Consistent Deformations - Force Method]

((Structural engineering topics))
[[Category:Structural analysis]]
[[Category:Finite element method]]

Pages transcluded onto the current version of this page (help):

Flexibility method (edit)
Template:Ambox (view source) (template editor protected)
Template:Cite web (view source) (protected)
Template:EquationNote (view source) (semi-protected)
Template:EquationRef (view source) (semi-protected)
Template:Find sources mainspace (view source) (template editor protected)
Template:Hlist/styles.css (view source) (protected)
Template:Icon (view source) (template editor protected)
Template:Main other (view source) (protected)
Template:More citations needed (view source) (template editor protected)
Template:Navbox (view source) (template editor protected)
Template:NumBlk (view source) (semi-protected)
Template:Numbered block (view source) (semi-protected)
Template:Pagetype (view source) (protected)
Template:Refimprove (view source) (template editor protected)
Template:Reflist (view source) (protected)
Template:Reflist/styles.css (view source) (protected)
Template:SDcat (view source) (template editor protected)
Template:Short description (view source) (protected)
Template:Short description/lowercasecheck (view source) (protected)
Template:Structural engineering topics (edit)
Template:Trim (view source) (protected)
Module:Arguments (view source) (protected)
Module:Category handler (view source) (protected)
Module:Category handler/blacklist (view source) (protected)
Module:Category handler/config (view source) (protected)
Module:Category handler/data (view source) (protected)
Module:Category handler/shared (view source) (protected)
Module:Check for unknown parameters (view source) (protected)
Module:Citation/CS1 (view source) (protected)
Module:Citation/CS1/COinS (view source) (protected)
Module:Citation/CS1/Configuration (view source) (protected)
Module:Citation/CS1/Date validation (view source) (protected)
Module:Citation/CS1/Identifiers (view source) (protected)
Module:Citation/CS1/Utilities (view source) (protected)
Module:Citation/CS1/Whitelist (view source) (protected)
Module:Citation/CS1/styles.css (view source) (protected)
Module:Disambiguation (view source) (protected)
Module:Disambiguation/templates (view source) (protected)
Module:Find sources (view source) (template editor protected)
Module:Find sources/config (view source) (template editor protected)
Module:Find sources/links (view source) (template editor protected)
Module:Find sources/templates/Find sources mainspace (view source) (template editor protected)
Module:Icon (view source) (template editor protected)
Module:Icon/data (view source) (template editor protected)
Module:Message box (view source) (protected)
Module:Message box/ambox.css (view source) (protected)
Module:Message box/configuration (view source) (protected)
Module:Namespace detect/config (view source) (protected)
Module:Namespace detect/data (view source) (protected)
Module:Navbar (view source) (protected)
Module:Navbar/configuration (view source) (protected)
Module:Navbar/styles.css (view source) (protected)
Module:Navbox (view source) (template editor protected)
Module:Navbox/configuration (view source) (template editor protected)
Module:Navbox/styles.css (view source) (template editor protected)
Module:Pagetype (view source) (protected)
Module:Pagetype/config (view source) (protected)
Module:Redirect (view source) (protected)
Module:SDcat (view source) (template editor protected)
Module:String (view source) (protected)
Module:Unsubst (view source) (protected)
Module:Yesno (view source) (protected)

Return to Flexibility method.

Retrieved from "https://en.wikipedia.org/wiki/Flexibility_method"