4 ft 1 in (1.245 m) (1870 series); 4 ft 7.5 in (1.410 m) (1884 and 1894 series)
Length
50 ft 7 in (15.42 m)
Loco weight
39.45 long tons (40.08 t; 44.18 short tons) (1870 series); 45.15 long tons (45.87 t; 50.57 short tons) (1884 series); 48.75 long tons (49.53 t; 54.60 short tons) (1894 series)
The Great Northern Railway (GNR) No. 1 class Stirling Single is a class of steam locomotive designed for express passenger work. Designed by Patrick Stirling, they are characterised by a single pair of large (8 ft 1 in) driving wheels which led to the nickname"eight-footer". Originally the locomotive was designed to haul up to 26 passenger carriages at an average speed of 47 miles per hour (76 km/h).[1] They could reach speeds of up to 85 mph (137 km/h).[2]
Development
On his arrival at GNR, Stirling set out to standardise the railway's rolling stock. He also borrowed a 'single-wheeler' from the Great Eastern Railway and, in 1868, designed two versions of a 2-2-2 arrangement with 7 ft 1 in (2.159 m) driving wheels.[3]
The outcome in 1870 was a locomotive with 8 ft 1 in (2,460 mm) driving wheels, designed specifically for high-speed expresses between York and London. The British norm in those days was inside cylinders. However, not only were there frequent failures of the cranked axle shafts, with such large driving wheels they would have set the boiler too high. Stirling therefore used outside cylinders, with a four-wheeled bogie for lateral stability at the front end. According to Hamilton Ellis's description, entitled 'Pat Stirling's masterpiece,' the design was a version of a 2-2-2 designed by Stirling for the Glasgow and South Western Railway, "considerably enlarged, and provided with a leading bogie."[4]
A total of 53 were built at Doncaster Works between 1870 and 1895, in three series introduced in 1870, 1884, and 1894.[5] George Frederick Bird referred to the three series as "G, G2 and G3 classes" in 1910,[6] and this classification has been used in other sources[7] but it does not appear to have been used officially by the GNR.
The GNR did not number its locomotives sequentially, instead using numbers freed up by withdrawing older locomotives. Thus the 1870 series was numbered between GNR No. 1 and 671, the 1884 series 771-8 and 1001-2, and 1894 series 1003-8.
Performance
No. 544 with a domed boiler
These locomotives were able to haul 275-long-ton (279 t; 308-short-ton) trains at an average of 50 miles per hour (80 km/h), with a top speed on lighter trains of 85 miles per hour (137 km/h).[8] When taking part in the 1895 Race to the North, GNR Stirling No. 775 made the 82 miles (132 km) from Grantham to York in 1 hour 16 minutes. This translates to an average speed of 64.7 mph (104.1 km/h).
Members of the 1894 series were originally built weighing 49.55 long tons (50.35 t) but following two high-speed derailments in 1895/6 the weight was reduced by 1% to 48.755 long tons (49.537 t; 54.606 short tons).[9]
Accidents and incidents
On 10 November 1895, an overnight Scottish express hauled by locomotive No. 1006 derailed at St Neots when it encountered a broken rail. One person was killed. The accident report by Her Majesty's Railway Inspectorate commented on the abnormally heavy axle loading of the locomotive: nearly 20 tons on the driving axle.[10]
On 7 March 1896, a passenger train hauled by locomotive No.1003 was derailed at Little Bytham, Lincolnshire due to the premature removal of a speed restriction after track renewal. Two people were killed.[11]
Withdrawal and preservation
With the arrival of the Ivatt Atlantics after 1898, the class began to be displaced from the most prestigious express services. Several examples were rebuilt by Henry Ivatt after 1898 with a domed boiler, but withdrawals of the 1870 series began in 1899. The last examples of the class were in use on secondary services until 1916.
Preserved No. 1
The first of the class, No 1 is the only engine to be preserved. It is exhibited at the National Railway Museum, York.[12] It was restored to running order during the 1930s for the fiftieth anniversary of the Race to the North and steamed again during the 1980s.
The locomotive appeared to be in steam for its 'performances', however it was not, with fog machine generated smoke being used to portray escaping steam. In reality the locomotive was shunted into position during the performance using a Class 08 Diesel Shunter which remained out of sight of the main stage.
An 18-inch minimum gauge model of No. 1 was built in 1898, at the Regent Street Polytechnic, from a set of parts supplied by W. G. Bagnall. Amongst the students at Regent Street who worked on the model was Henry Greenly who later became a celebrated miniature locomotive builder and supplied locomotives for the Romney, Hythe and Dymchurch Railway. The locomotive was initially sold to Mr. E.F.S. Notter, the Great Northern Railway District Locomotive Superintendent at Kings Cross, who between 1910 and 1914 operated it at Alexander Park (London) and later kept it in King Cross 'Top Shed', the home of the full size Stirling Singles.[citation needed] In 1926 this locomotive was bought by the Fairbourne Miniature Railway[citation needed] and in 1936 it was sold to the Jaywick Miniature Railway,[13] which ran it until 1939. It then passed through the hands of a number of private owners until it was bought by the World of Country Life Museum at Sandy Bay, Exmouth, Devon, in 1986.[citation needed]
Bagnall had earlier in 1893 supplied a similar model (works number 1425) to Lord Downshire of Easthampstead Park, CrowthorneBerkshire. This engine was later preserved by Mr Hoare in the Boys Reading Room at the Training Ship Mercury at Hamble. It was subsequently sold to a private owner in Southampton in 1946. Its current whereabouts is unknown.[citation needed]
Nuremberg toymaker Georges Carette's range included a 2.5 inch-gauge model of Stirling Single 776, in around 1900. It was marketed in the UK by Bassett-Lowke, appearing in their 1904 catalogue.[citation needed]
An unpowered 5-inch gauge model of a Stirling Single locomotive, engineered by Dennis Hefford, is on display at the entrance to Arch Two of Brighton Toy and Model Museum.[citation needed]
Kitmaster produced an injection moulded plastic kit of the Stirling Single in the 1950s. David Boyle, founder of Dapol Model Railways, recalls seeing the moulds being destroyed in the early 1980s, leading him to purchase the tooling for and reissue the remaining Kitmaster kits.[citation needed]
Aster Hobby introduced Gauge1 live steam model in 1996.[14][15]
In April 2015, Rapido Trains announced that a forthcoming OO gauge model would be exclusively available from Locomotion Models.
