King George V
GWR No. 6000 King George V at STEAM – Museum of the Great Western Railway, Swindon
Type and origin Power type Steam Designer C.B. Collett Builder GWR Swindon Works Build date June 1927 Website Great Western Railway steam locomotive 'King George V' 4-6-0 King class, No 6000, 1927
Specifications Leading dia. 3 ft 0 in (0.914 m) Driver dia. 6 ft 6 in (1.981 m) Minimum curve 8 chains (530 ft; 160 m) normal, 7 chains (460 ft; 140 m) slow Length: ​  • Over beams 68 ft 2 in (20.78 m) Width 8 ft 11+1⁄2 in (2.73 m) Height 13 ft 4+3⁄4 in (4.08 m) Axle load 22 long tons 10 cwt (50,400 lb or 22.9 t) full Adhesive weight 67 long tons 10 cwt (151,200 lb or 68.6 t) full Loco weight 89 long tons 0 cwt (199,400 lb or 90.4 t) full Tender weight 46 long tons 14 cwt (104,600 lb or 47.4 t) full Total weight 135 long tons 14 cwt (304,000 lb or 137.9 t) Fuel type Coal Fuel capacity 6 long tons 0 cwt (13,400 lb or 6.1 t) Water cap. 4,000 imp gal (18,000 L; 4,800 US gal) Boiler: ​  • Type GWR Number 12 Boiler pressure 250 lbf/in2 (1.72 MPa) Heating surface: ​  • Firebox 194 sq ft (18.0 m2)  • Tubes 2,008 sq ft (186.5 m2) Superheater: ​  • Heating area 313 sq ft (29.1 m2) Cylinders Four, two inside, two outside Cylinder size 16.25 in × 28 in (413 mm × 711 mm) Valve gear Inside cylinders: Walschaerts Outside cylinders: derived from inside cylinders via rocking levers Valve type Piston valves
Performance figures Tractive effort 39,700 lbf (176.6 kN) currently
Career Operators Great Western Railway/British Railways Class GWR 6000 Class Power class GWR: Special BR: 8P Number in class 1 Official name King George V Axle load class GWR: Double Red Locale Western Region Withdrawn December 1962 Current owner National Railway Museum

Great Western Railway (GWR) 6000 Class King George V is a preserved British steam locomotive.

Background

After developing the "new" GWR Star Class in the form of the GWR Castle Class, chief mechanical engineer Charles Collett was faced with the need to develop an even more powerful locomotive to pull 13+ carriage express trains.^[1]

Collett successfully argued with the GWR's General Manager, Sir Felix Pole, that had the axle-loading restriction of 19.5 long tons (19,800 kg) of the "Castle" class been increased to the maximum allowable of 22.5 long tons (22,900 kg), an even more powerful locomotive could have been created. Pole agreed to allow Collett to explore such a design, subject to getting tractive effort above 40,000 lbf (180,000 N).^[1]

Collett designed the "King" Class to the maximum dimensions of the original GWR 7 ft 1⁄4 in (2,140 mm) broad-gauge engineering used to develop its mainline,^[1] resulting in the largest loading gauge of all the pre-nationalisation railways in the UK, with a maximum height allowance of 13 feet 5 inches (4.09 m).^[1] Consequently, this restricted them as to where they could operate under both GWR and British Railways ownership.^[1] To accommodate the largest possible boiler, and to conform with Pole's requested tractive effort requirement, the "King" class were equipped with smaller 6 ft 6 in (1.981 m) main driving wheels than the "Castle" class. This resulted in both the GWR's highest-powered locomotive design, but most importantly a higher tractive effort than the "Castle". This combination allowed the "King" class to pull the now required higher-weight 13+ coach express trains from London to Bristol and onwards to the West Country, at a higher-speed timetable average than the "Castle".^[1]

With the class to be originally named after notable cathedrals, in light of the invitation to feature in the Baltimore and Ohio Railroad's centenary celebrations, the GWR decided to make them more notable by naming the class after British Kings.^[1]

Operational career

As the first of the class, No. 6000 was specifically named after the then monarch of the United Kingdom King George V. Built at Swindon Works and completed in June 1927, following a period of running in, the locomotive was shipped to the United States in August 1927, to feature in the B&O's centenary celebrations. During the celebrations it was presented with a bell and a plaque, and these are carried to this day. This led to it being affectionately known as "The Bell". The bell carries the inscription:

After returning from the US it was allocated to Old Oak Common. Moved by British Railways to Bristol in 1950, it was returned to Old Oak Common in 1959, and withdrawn by the Western Region of British Railways in December 1962 after covering 1,910,424 miles (3,074,529 km).

Preservation

The locomotive was officially preserved as part of the national collection. It was restored to main line running order at the Bulmer's Railway Centre in Hereford. Operationally based at Hereford, in 1971 it became the very first steam locomotive to break the British Railways mainline steam ban that had been in place since the completion of the Fifteen Guinea Special in 1968. Its restoration to main line service and subsequent operation is often credited with opening the door for the return of steam to the mainlines of the UK.

The engine took part in the GWR150 celebrations in 1985 hauling railtours, one trip which took place on 7 Apr was "The Great Western Limited" which was running from London Paddington to Plymouth via Bristol was booked to be worked by No. 6000 while double heading with No. 7819 Hinton Manor. Both engines we're to double head the train from Bristol to Plymouth on the outward journey but No. 6000 was failed in Taunton with a hot box and had to be taken off the train. No. 7819 Hinton Manor continued alone with the train but that would too later be failed in Exeter with a hot box.^[2]

After years of running, a costly overhaul of the locomotive was declined by the National Railway Museum. In part, this was due to the fact that, since its second renovation, a second class-member King Edward I had been restored for mainline operation. In addition, the higher ballast beds in place on the Western Region since the early 1980s, to allow for the high speed running of the InterCity 125 train sets, have greatly reduced the running-level loading gauge of the former GWR mainline – especially under bridges – to 13 feet 1 inch (3.99 m), so enabling mainline running of a "King" class now requires a reduction in the height of the original GWR-built chimney, cab and safety valve bonnets by 4 inches (100 mm), as had been done on the restoration of King Edward I. No. 6000 is the only one of the three preserved "King" class locomotives to retain its original-built full-height fittings.

After closure of the Bulmer's Steam Centre in 1990, No. 6000 moved to the Swindon "Steam" Railway Museum. In 2008, it swapped places with No. 92220 Evening Star, and became resident at the National Railway Museum. In late 2015, No. 6000, along with City of Truro, returned to STEAM – Museum of the Great Western Railway (located at the site of the old railway works in Swindon), and both were put on display in preparation for Swindon 175 (in 2016), celebrating 175 years since the inception of Swindon as a railway town.^[3][4] Both locomotives are expected to remain at Swindon for 5 years.^[3]

Gallery

• 
  As was displayed as a static exhibit at the Swindon 'Steam' Railway Museum
• 
  Close-up of the bell
• 
  Nameplate
• 
  Part of the backhead
• 
  King George V at National Railway Museum, York.