Gemini Guidance Computer

Gemini Guidance Computer in National Air and Space Museum
Invented by	IBM Federal Systems Division
Manufacturer	IBM Federal Systems Division
Introduced	1965; 59 years ago (1965)
Discontinued	1966; 58 years ago (1966)
Type	Avionics Guidance Computer
Processor	Discrete Components [1]
Frequency	7.143 kilohertz clock
Memory	39-bit words memory, each composed of three 13-bit syllables, 4096 words of memory, in a ferrite core array.
Ports	Modular Display Keyboard (MDK), Modular Display Readout (MDR), Attitude Control and Maneuver Electronics (ACME), Inertial Measurement Unit (IMU), Horizon Sensors, Time Reference System (TRS)[2]
Weight	58.98 pounds (26.75 kg)
Dimensions	18.9"(H)×14.5"(W)×12.75"(D)

The Gemini Guidance Computer (sometimes Gemini Spacecraft On-Board Computer (OBC)) was a digital, serial computer designed for Project Gemini, America's second human spaceflight project.^[3] The computer, which facilitated the control of mission maneuvers, was designed by the IBM Federal Systems Division.^[4]

Functionality

Project Gemini was the first with an on-board computer, as Project Mercury was controlled by computers on Earth.^[5] The Gemini Guidance Computer was responsible for the following functions:^[4][3]

• Ascent – serves as a backup guidance system. The switchover is manually controlled by the astronauts
• Orbital flight – gives the astronauts the capacity to navigate, allowing them to choose a safe landing spot in an emergency and calculate the timing of retrofire. (on extended missions ground data may become unavailable when ground data network rotates out of the orbital plane.)
• Rendezvous – serves as primary reference by providing guidance information to the astronauts. The orbit parameters are determined by the ground tracking which are then sent to the spacecraft; the guidance computer was responsible for processing the information along with sensed spacecraft attitude. The information was presented to the astronauts in terms of spacecraft coordinates.
• Reentry – feeds commands directly to the reentry control system for automatic reentry or provides the guidance information to the astronauts for manual reentry.

Specs

• The computer was architecturally similar to the Saturn Launch Vehicle Digital Computer, in particular in the instruction set;^[6] however its circuit integration was less advanced.^[7] The GGC weighed 58.98 pounds (26.75 kg) and was powered by 28V DC. During a short power outage it could be powered by the Auxiliary Computer Power Unit (ACPU)
• 39-bit words memory, each composed of three 13-bit syllables^[6]
• Ferrite core memory of 4096 words^[8]
• Two's complement integer arithmetic
• 7.143 kilohertz clock (140 µs per instruction); all instructions took a single cycle except for multiplication and division