The Giant Magellan Telescope (Giant Magellan or GMT) is a 25.4-meter, ground-based, extremely large telescope under construction at Las Campanas Observatory in Chile's Atacama Desert. Commissioning is anticipated in the early 2030s.[1][2][3][4] Once complete, the Giant Magellan will be the largest Gregorian telescope ever built observing in optical and mid-infrared (320–25000 nm[5]) light. The telescope uses seven of the world’s largest mirrors to form a light collecting area of 368 square meters.[6][7]
The Giant Magellan Telescope is expected to have a resolving power 10 times that of the Hubble Space Telescope and four times that of the James Webb Space Telescope, although it will be unable to image in the same infrared frequencies available to telescopes in space. Scientists will use the Giant Magellan to study nearly all aspects of astrophysics — from searching for signs of life on distant exoplanets to investigating the cosmic origins of chemical elements.[8][9][10][11]
The Giant Magellan Telescope began casting its primary mirrors in 2005 and started site construction in 2015. As of 2023, all seven of the primary mirrors have been cast, the first of seven adaptive secondary mirrors are underway, and manufacturing of the telescope mount is underway. Other telescope subsystems are in final design stages.[12][13][14]
The USD $2 billion scale telescope is the work of the GMTO Corporation, an international consortium of leading research institutions representing seven countries: Australia, Brazil, Chile, Israel, South Korea, Taiwan, and the United States.[15]
Site
Giant Magellan Telescope Construction Site Aerial View
The location of the telescope is Las Campanas Observatory,[16] which is also the site of the Magellan Telescopes, some 115 km (71 mi) north-northeast of La Serena, Chile and 180 km (112 mi) south of Copiapó, Chile, at an altitude of 2,516 m (8,255 ft).[17][18] The site has been owned by Carnegie Institution for Science's since 1960. The site has been chosen as the telescope’s location because of its outstanding astronomical seeing and clear weather throughout most of the year.[19] Moreover, due to the sparsity of population centers and other favorable geographical conditions, the night sky in most of the surrounding Atacama Desert region is not only free from atmospheric pollution, but in addition it is probably one of the places least affected by light pollution, making the area one of the best spots on Earth for long-term astronomical observation. The southern hemisphere location provides access to the galactic center of the Milky Way, the nearest supermassive black hole (proximity to Sagittarius A*), the nearest star to our Sun (Proxima Centauri), the Magellanic Clouds, and many of the closest galaxies and exoplanets.[9][10]
Design and status
The Giant Magellan Telescope’s Gregorian design will produce the highest possible image resolution of the universe over the widest field of view with only two light collecting surfaces, making it the most optically proficient of all extremely large telescopes in the 30-meter-class.[20]
Table: Performance Specifications
Optical Prescription
Aplanatic Gregorian
Focal Plane Scale
0.997 arcseconds/mm
Wavelength Range
0.32–25 um
Field of View
20 arcminute diameter
Primary Mirror Diameter & Collecting Area
25.4 m, 368 m²
Primary Mirror f/#
0.71
Mirror f/#Finalƒ/# (with Wide Field Corrector)
8.16 [8.34]
Diffraction-limited Angular Resolution
0.01 arcsecond at 1 um
Site preparation began with the first blast to level the mountain peak on March 23, 2012.[21] In November 2015, construction was started at the site, with a ground-breaking ceremony. In January 2018, WSP was awarded the contract to manage construction of the Giant Magellan Telescope.[22]
The casting of the first mirror, in a rotating furnace, was completed on November 3, 2005.[23][24] A third segment was cast in August 2013,[13][25] the fourth in September 2015,[26] the fifth in 2017,[27] the sixth in 2021,[11] and the last in 2023.[14]
Polishing of the first mirror was completed in November 2012.[28]
Ingersoll Machine Tools finished constructing of a manufacturing facility to manufacture the Giant Magellan Telescope mount in Rockford, Illinois in December 2021. As of 2022, construction of the telescope mount is underway. The structure is expected to be delivered to Chile at the end of 2025.[29][30]
Enclosure
The Giant Magellan Telescope enclosure is a 65-meter-tall structure that shelters the telescope’s mirrors and components from the extreme weather and earthquakes in the Atacama Desert, Chile. The 4,800-ton enclosure can complete a full rotation in nearly three minutes and is designed with a closed-cycle forced-air convection system to maintain a thermal equilibrium within the telescope enclosure and reduce ambient thermal gradients across the primary mirror surface.[31]
The enclosure design provides the telescope pier with a seismic isolation system that can survive the strongest earthquakes expected over the 50-year lifetime of the observatory and will allow the telescope to quickly return to operations after the more frequent, but less intense seismic events that are experienced several times per month.[31]
In March 2022, engineering and architecture firm IDOM was awarded the contract to finalize the telescope’s enclosure design by 2024.[32]
Telescope Mount
The telescope mount structure is an 39 meters tall alt-azimuth design and it will stand on a pier that is 22 meters in diameter. The structure will weigh 1,800 tons without mirrors and instruments. With mirrors and instruments, it will weigh 2,100 tons. This structure will float on a film of oil (50 microns thick), being supported by a number of hydrostatic bearings to allow the telescope mount to glide frictionlessly in three degrees of freedom.[33]
In October 2019, GMTO Corporation announced the signing of a contract with German company MT Mechatronics (subsidiary of OHB SE) and Illinois-based Ingersoll Machine Tools, to design, build and install the Giant Magellan Telescope’s structure. Ingersoll Machine Tools finished constructing a 40,000 square foot facility to manufacture the Giant Magellan Telescope mount in Rockford, Illinois in December 2021. As of 2022, construction of the telescope mount is underway and is expected to be completed in 2025.[33]
The telescope mount consists of seven “cells” that hold and protect the telescope’s 18-ton primary mirrors. The mirror support system does not have a traditional internal load-carrying frame. Instead, the strength comes from its unique shape and external shell. This allows the telescope mount to have a compact and lightweight design for its size. It also makes the telescope extremely stiff and stable so that it can resist image quality interruptions from wind and mechanical vibrations.[33]
The “cell” primary mirror support system contains “active optics” with pneumatic actuators will push on the back of the primary mirrors to correct for the effects of gravity and temperature variations on the seven, 8.4 meter diameter primary mirrors.[34] In addition, fourteen air handler units utilizing CO2 based refrigeration – the first system of its kind used for telescopes – are mounted to the interior of the mirror support system to circulate the air.[35]
A closed-cycle forced-air convection system is used to maintain a thermal equilibrium within the telescope enclosure and reduce thermal gradients across the primary mirror surface.[35]
As a precursor to the fabrication of the seven mirror support systems, a full-scale prototype has also been built to validate design decisions and demonstrate the performance.[33]
In April 2023, OHB Italia S.p.A. finished manufacturing and testing the first of seven mirror covers for the Giant Magellan. In just over two minutes, the covers will retract in unison to protect the world’s largest mirrors when not in use.[36]
Primary mirrors
Giant Magellan Telescope Primary Mirror Back SurfaceComparison of nominal sizes of apertures of the Giant Magellan Telescope and some notable optical telescopes
The telescope will use seven of the world's largest mirrors as primary mirror segments, each 8.417 m (27.61 ft) in diameter. These segments will then be arranged with one mirror in the center and the other six arranged symmetrically around it. The challenge is that the outer six mirror segments will be off-axis, and although identical to each other, will not be individually radially symmetrical, necessitating a modification of the usual polishing and testing procedures.[37]
The casting of each mirror uses 20 tons of E6 borosilicate glass from the Ohara Corporation of Japan and takes about 12–13 weeks.[39] After being cast, they need to cool for about six months.[13] Each takes approximately 4 years to cast and polish, obtaining a finish that is so smooth that the highest peaks and valleys are smaller than 1/1000 of the width of a human hair.[13]
As this was an off-axis segment, a wide array of new optical tests and laboratory infrastructure had to be developed to polish the mirror.
The intention is to build seven identical off-axis mirrors, so that a spare is available to substitute for a segment being recoated, a 1–2 week (per segment) process required every 1–2 years.[40] While the complete telescope will use seven mirrors, it is planned to begin operation with four mirrors.[13]
Segments 1-3 are complete. Segments 4-6 are undergoing polishing and testing. Segment 7 is planned for casting in 2023.[13]
The primary mirror array will have a focal ratio (focal length divided by diameter) of f/0.71. For an individual segment – one third that diameter – this results in a focal ratio of f/2.14.[25]
The overall focal ratio of the complete telescope will be f/8 and the optical prescription is an aplanatic Gregorian telescope. Like all modern large telescopes it will make use of adaptive optics.[41][42]
Scientists expect very high quality images due to the very large aperture and advanced adaptive optics. Image quality is projected at 20 arcminute field of view, correctable from 0-20 arcminute. The images will be sharp enough to resolve the torch engraved on a dime from nearly 160 kilometers (100 miles) away and expected to exceed that of the Hubble Space Telescope.[43]
The Giant Magellan Telescope’s Adaptive Secondary Mirror consists of seven segments about 1.1 meters in diameter. They are deformable “adaptive optics” mirrors tasked with correcting the atmospheric distortion of the light gathered by the telescope. The Adaptive Secondary Mirrors consist of a thin sheet of glass that is bonded to more than 7000 independently controlled voice coil actuators. Each segment can deform/reshape their 2-millimeter-thick surface 2,000 times per second to correct for the optical blurring effect of Earth’s atmosphere.[8]
The first segment is under construction as of August 2022 and will be completed in 2024.[8]
The Giant Magellan Telescope will have three modes of adaptive optics.
Ground Layer Adaptive Optics (GLAO): The Gregorian design and integrated adaptive optics system allow ground layer atmospheric turbulence to be corrected over a wide field of view, improving natural seeing image quality by 20–50% from the visible to near-infrared (with the greatest improvements at red wavelengths). The Giant Magellan uses wavefront sensors that allow any instrument to receive GLAO corrected images.
Natural Guide Star Adaptive Optics (NGAO): NGAO uses a single natural guide star (bright) to deliver diffraction limited, high Strehl ratio images (>75 % Strehl in the K band) at wavelengths from 0.6 μm into the mid-infrared over a field of view a few arcseconds in diameter.
Laser Tomography Adaptive Optics (LTAO): LTAO uses six laser guide stars and a single natural guide star (faint) to extend diraction-limited performance to nearly the full sky with moderate Strehl ratio (>30 % Strehl in the H band) at infrared wavelengths over a much wider field of view than NGAO (~20” at 1μm) and is available to any instrument designed to use this mode.
The Giant Magellan the only 30-meter class telescope with ground layer adaptive optics over a full field of view.[45]
Science instruments
The Giant Magellan Telescope's Gregorian design can accommodate up to 10 visible to mid-infrared science instruments, from wide field imagers and spectrographs that reach hundreds of objects at one time, to high-resolution imagers and spectrographs that can study exoplanets and even find biosignatures. Each science instrument is designed to take advantage of the telescope’s four observing modes.
The telescope will have an advanced fiber-optic system that uses tiny robotic positioners will expand the capabilities of the spectrographs by allowing them to access highest resolution of all telescopes in the 30-meter class over a full wield of view of 20 arcminutes. Using this system it is possible to observe multiple targets over the entire field with one or more of the spectrographs This enables the telescope to see fainter objects with unrivaled resolution and sensitivity. The advantage is extremely powerful for spectroscopy and the precise measurements of distances, dynamics, chemistry, and masses of celestial objects in deep space.
GMT-Consortium Large Earth Finder (G-CLEF) - an optical band echelle spectrograph[46]
GMT Multi-object Astronomical and Cosmological Spectrograph (GMACS) - a visible multi-object spectrograph[47]
GMT Integral-Field Spectrograph (GMTIFS) - a near-IR IFU and AO imager[48]
GMT Near-IR spectrograph (GMTNIRS) - a near-IR spectrograph[49]
The Many Instrument Fiber System (MANIFEST) - a facility fiber system[50]
Additionally the Commissioning Camera (ComCam) will be used to validate the Ground Layer Adaptive Optics performance of the GMT facility Adaptive Optics System.[51]
Science drivers for the Giant Magellan Telescope include studying planets in the habitable zones of their parent star in the search for life; the nature of dark matter, dark energy, gravity, and many other aspects of fundamental physics; the formation and evolution of the first stars and galaxies; and how black holes and galaxies co-evolve.[52]
Notes: future dates for first-light are provisional and are likely to change.
Organizations
The Giant Magellan Telescope is the work of the GMTO Corporation, an international consortium of research institutions representing seven countries from Australia, Brazil, Chile, Israel, South Korea, Taiwan, and the United States.[9][57] The GMTO Corporation is a nonprofit 501(c)(3) organization with offices in Pasadena, California and Santiago, Chile. The organization has an established relationship with the Chilean government, having been recognized through a presidential decree as an “international organization” in Chile. The telescope operates under a cooperative agreement with the University of Chile, granting 10% of the observing time to astronomers working at Chilean institutions.[58][8] The following organizations are members of the consortium developing the telescope.[59]
The Giant Magellan Telescope is a part of the US Extremely Large Telescope Program (US-ELTP), as of 2018 . The US-ELTP will provide US-based astronomers with NSF funded all-sky observing access to both the Giant Magellan Telescope and Thirty Meter Telescope. The program was ranked as the highest ground-based priority in the National Academy of SciencesAstro2020 Decadal Survey which noted that the US-ELTP will provide “observational capabilities unmatched in space or the ground and open an enormous discovery space for new observations and discoveries not yet anticipated."[60]
^
Ketelsen, Dean (2012-01-15), GMT polishing at Mirror Lab open house 14 Jan, 2012, archived from the original on 2021-12-12, retrieved 2012-04-08, While guests toured the facilities, the Lab staff ran both of our polishing machines on current projects, including this view of final polishing on the first GMT segment.
^"Telescope Structure". GMT Conceptual Design Report. February 2006. p. 7-17 § 7.4.5. Archived from the original(PDF) on 2012-03-28. Retrieved 2007-10-07. The center segment and cell will not have a spare, thus observations will be interrupted every one or two years for the 1–2 week period required to recoat that mirror.
^"Chapter 2: Overview", GMT Conceptual Design Report, 2006, p. 2-4 § 2.5.1, archived from the original(PDF) on 2012-03-28, retrieved 2012-03-25, GMT is designed from the outset around adaptive optics (AO) with the goal of producing diffraction limited images at 1 μm and longer wavelengths.
Related media on Commons
