As with the rest of the Garden State Parkway, the bridge is a component of the National Highway System,[5] a network of roadways that are important to the country's economy, defense, and mobility.[6] The bridge carries two lanes of traffic in each direction.[5] The bridge is used heavily in the summertime, peaking on Saturdays.[1]
In 1952, the New Jersey Highway Authority (NJHA) was created to facilitate the construction of the Garden State Parkway.[7] In October 1954, the NJHA received bids for constructing a 3,650-foot (1,110 m) bridge crossing the Great Egg Harbor Bay, beginning at Beesley's Point, as well as a 750-foot (230 m) bridge crossing Drag Channel. The bridges would be linked by a causeway, and form a part of the Garden State Parkway. In construction, the bridge project utilized 140 prestressed concrete beams, each 40 feet (12 m) in length, at an individual cost of $640 (equivalent to $6,974 in 2022). The project also used a concrete deck at the cost of less than $2 per square foot.[8] On May 26, 1956, the Great Egg Harbor Bridge opened at a cost of US$4.5 million, completing the Garden State Parkway.[7][4]
The bridge carried traffic in both directions, but soon was unable to accommodate the increasing traffic. A parallel bridge carrying northbound traffic was opened in 1972.[4] In 1999, the northbound span was closed for seven weeks after cracks were found in the steel hangars.[9] In 2000, after cracking was found in the steel supports on the southbound bridge, construction crews made emergency repairs at the cost of $900,000 (equivalent to about $1,529,000 in 2022).[10]
Reconstruction
A 2002 study by the NJDOT Bridge Management System indicated that both the northbound and southbound bridges over Great Egg Harbor were structurally deficient, and the crossing of Drag Channel was functionally obsolete.[1] A traffic study in 2004 identified poor pavement on the bridge.[1] To address the structural deficiency along substandard roadway, and to maintain a proper evacuation route, the New Jersey Turnpike Authority (NJTA) proposed a replacement bridge as early as 2010. The NJTA worked with the United States Coast Guard as the lead federal agency for the project due to the crossing over a navigable roadway. The proposed project would construct a new southbound bridge, wide enough to carry traffic in both directions in the event of an emergency, as well as carrying a multi-use pedestrian and bike path from US 9 in Somers Point to Harbor Road. Included in the project was demolishing the Beesley's Point Bridge,[11] built in 1928, and closed to traffic in June 2004 due to damage.[12][13] On September 20, 2012, the NJTA held a public meeting in Upper Township about the proposed bridge.[14]
In March 2013, the NJTA awarded Route 52 Constructors a $129.8 million (2013 USD) contract to build the southbound replacement bridge, and demolish the Beesley's Point Bridge. These were the same contractors to build the second phase of the New Jersey Route 52 replacement bridge, between Somers Point and Ocean City. Demolition of the Beesley's Point Bridge began in June 2013, and construction of the replacement southbound Parkway bridge began that September, 12 ft (3.7 m) west of the existing bridge.[15] Hardesty & Hanover, LLP designed the new crossing.[16] The bridge was supported by 20 piers with 3 columns each, using prestressed concrete beams. This created a wider channel than the original 1954 bridge. To test the performance of the pilings, the crew performed the first statnamic load test in the state of New Jersey. Construction crews worked to avoid disrupting migratory bird and fish species.[17] In August 2016, the new southbound bridge opened,[18] and in November of that year, the last part of the Beesley's Point Bridge was dismantled.[13] The project ultimately cost $142.9 million.[19] After the current south bridge was finished, Southbound traffic was then redirected to the current southbound bridge, at which point the original was demolished. Traffic was available on both the north bound and southbound bridges for a small amount of time, after which northbound traffic was redirected to the current southbound bridge so that the northbound bridge could undergo repairs.
In July 2016, the NJTA awarded a $49.8 million contract to rehabilitate the northbound span and demolish the old southbound bridge.[20][19] The road project was completed in May 2019.[13][21] After the current south bridge was finished, Southbound traffic was then redirected to the current southbound bridge, at which point the original was demolished. Traffic was available on both the north bound and southbound bridges for a small amount of time, after which northbound traffic was redirected to the current southbound bridge so that the northbound bridge could undergo repairs. On July 8, 2020, a bike and walking path opened on the southbound span, connecting Beesley's Point with US 9 in Somers Point. The northern portion in Somers Point required bikers and walkers to navigate traffic entering and exiting the Parkway, although there were plans to connect the path with the Somers Point Bike Path along US 9 and Somers Point–Mays Landing Road.[22]
^Natzke, Stefan; Neathery, Mike & Adderly, Kevin (June 26, 2013). "What is the National Highway System?". National Highway System. Federal Highway Administration. Retrieved July 1, 2013.
G.S. Parkway / US 9
