Group A is a set of motorsport regulations administered by the FIA covering production derived touring cars for competition, usually in touring car racing and rallying. In contrast to the short-lived Group B and Group C, Group A vehicles were limited in terms of power, weight, allowed technology and overall cost. Group A was aimed at ensuring numerous entries in races of privately owned vehicles.
Group A was introduced by the FIA in 1982 to replace the outgoing Group 2 as "modified touring cars", while Group N would replace Group 1 as "standard touring cars". During the early years there were no further formula for production based race cars. Cars from multiple Groups could contest the World Rally Championship for Manufacturers for example until 1997 when the specific World Rally Car formula was introduced as the only option. In recent years Groups A and N have begun to be phased out in eligibility in championships though they continue to form the homologation basis for most production based race car formulae including the Groups Rally which must first be homologated in Group A. Both Groups N and A, and the details of their differences are described in the FIAs International Sporting Code and several of its Appendices J articles.[1][2][3][4][5]
Homologation
To qualify for FIA approval, a minimum of 2,500 identical models have to be built in 12 consecutive months.[5] The homologation period lasts for every subsequent year of production and seven years after the year that less than 10% (250) are produced in one year and the model is considered out of production by the FIA.[2] Evolutions of the series production model homologated are permitted with a ET (Evolution of the type) extension applied.[2] Before 1993 the initial production requirement was 5000.[6]
However, not all manufacturers who built such models sold them all, some stripped the majority of them to rebuild them as stock models or used them to allow teams to use modified parts. One such example of this was Volvo with the 240 Turbo in 1985, an evolution of a model first homologated in 1982. After they had produced 500 such models, Volvo stripped 477 cars of their competition equipment and sold them as standard 240 turbo roadcars. As a result, after FISA's failed attempt at finding an "Evolution" car in any European countries, Volvo were forced to reveal the names of all 500 "evo" owners to be permitted to compete.[7]
The FIA continued to promulgate regulations for Group A touring cars until at least 1993,[8] however Group A survived in touring car racing in domestic championships until 1993. The German Deutsche Tourenwagen Meisterschaft (DTM) switched to a 2.5L Class 1 formula in 1993, while in Japan in 1994 the Japanese Touring Car Championship organisers followed suit and switched classes like most other countries who had adopted the British Touring Car Championship-derived Supertouring regulations. Many of the redundant Skylines found a new home in the form of the JGTC (Japanese GT Championship) with modified aerodynamic devices, showing its competitiveness whilst being up against Group C, former race modified roadcars and specially developed racers, like the Toyota Supras during the earlier years.
The Confederation of Australian Motor Sport had originally announced in mid-1983 that Australia would adopt Group A from 1 January 1985 to replace the locally developed Group C (not to be confused with FIA Group C racing cars) rules that had been in place since 1973. A class for the new Group A cars was included in selected Australian Touring Car endurance races in late 1984, prior to the replacement of Group C for 1985. The category would be officially termed Group 3A Touring Cars from 1988.[9] From 1993, CAMS replaced the existing Group A-based category with a new formula which would also be designated Group 3A Touring Cars.[10] This was initially open to five litre V8 powered cars and two litre cars (later to become known as V8 Supercars and Super Touring Cars respectively).
Hillclimb competitions still use Group A as a touring car class across Europe, while in Australia Group A is now a historic class, though only actual cars raced from 1985 to 1992 (complete with log books) are allowed to compete.
The cars are modified for greater power and torque, and fitted with suspension and tyres specifically suited to the conditions of the specific rally, which may take place entirely on asphalt roads, different consistencies of gravel and dirt roads and even snow/ice-covered roads on some rallies held in northern Europe.
By 1990, Group A cars exceeded the performance of the defunct Group B cars on many events, because although they had far less power they had better handling and traction. They were also much safer.
The last car to use the old Group A homologation requirement in the WRC Manufacturers' championship was the Mitsubishi Lancer Evolution VI. Group A cars could continue to enter WRC rallies until 2018 and can still enter the FIA's regional rally championships today.
