Wikipedia: The Missing Manual (Discuss) About this book Introduction Part I: Editing, creating, and maintaining articles Chapter 1: Editing for the first time Chapter 2: Documenting your sources Chapter 3: Setting up your account and personal workspace Chapter 4: Creating a new article Chapter 5: Who did what: Page histories and reverting Chapter 6: Monitoring changes Chapter 7: Dealing with vandalism and spam Part II: Collaborating with other editors Chapter 8: Communicating with your fellow editors Chapter 9: WikiProjects and other group efforts Chapter 10: Resolving content disputes Chapter 11: Handling incivility and personal attacks Chapter 12: Lending other editors a hand Part III: Formatting and illustrating articles Chapter 13: Article sections and tables of contents Chapter 14: Creating lists and tables Chapter 15: Adding images Part IV: Building a stronger encyclopedia Chapter 16: Getting readers to the right article: naming, redirects, and disambiguation Chapter 17: Categorizing articles Chapter 18: Better articles: A systematic approach Chapter 19: Deleting existing articles Part V: Customizing Wikipedia Chapter 20: Customizing with preferences Chapter 21: Easier editing with JavaScript Part VI: Appendices Appendix A: A tour of the Wikipedia page Appendix B: Reader's guide to Wikipedia Appendix C: Learning more

After you edit a Wikipedia article, other editors may, in turn, change the changes you've made. As one of the notes at the bottom of the standard edit screen used to say, "If you don't want your writing to be edited mercilessly or redistributed for profit by others, do not submit it." Edited mercilessly doesn't necessarily mean your words will be ripped apart, but they could be. Once you've submitted work to Wikipedia, it's fair game; you don't control it any more.

Rather than completely abandoning your edit to its fate, you probably want to check in and see how it's faring. Most experienced editors monitor articles they've edited, both to make sure other editors treat their edits reasonably, and to learn from what other editors do. This chapter will show you a number of ways to watch articles for changes, whether or not you've edited them.

The user contributions page[edit]

Figure 6-1. On the User contributions page, if you've done the most recent edit of an article, you'll see "top", in bold, at the end of its row. Here you see five edits for five different pages. Only the last page has been edited subsequently by another editor, as indicated by the absence of the word "top" at the end of that row.

When you're starting out, Wikipedia's list of your edits—your User contributions page—is a handy way to monitor changes to pages you've edited. You get to that list by clicking the "my contributions" link near the upper-right corner of your screen (assuming you're logged in). You'll see something like Figure 6-1.

Tip:
If Figure 6-1 looks confusing, take a look back at Chapter 5: Who did what: Page histories and reverting. The User contributions page has a lot in common with page histories discussed in that chapter, though it lists only your edits.

The key to using your User contributions page as a monitoring tool is the word "top" that appears at the end of an edit. Whenever you see that, you know that you were the last to edit the article, so you don't need to worry that it's been vandalized, and you don't have to look at it to see what constructive changes other editors may have made. If the "top" is missing from an edit, then you can click the "hist" link to go to the article's history and see edits made since the edit you were looking at.

However, using your User contributions page for monitoring changes has some limitations:

Still, sometimes your User contributions page is useful as a tracking device. For example, if you've done single edits to a bunch of articles, then no editing for two days, and now want to see what's happened to those articles, the User contributions page shows you which articles you need to check. (See the box below for a tip on making the page more readable.) But if you're like most active editors, you want something that monitors changes more closely, like a watchlist, described next.

Color-coding your user contributions page

If you really like to use your User contributions page to monitor changes, you can make it so that pages you've edited last are sharply distinguished from pages where another editor was the last to edit the page. To do so, copy the script from the User:Ais523/topcontrib.js page (except for the top line, which is a comment), and add it to your common.js page. (See the section about adding scripts for details on this procedure, including purging your cache to see the change take effect.)

After you've implemented this script, rows where another editor was the last to edit have a light red background, meaning "most recent," or, if the same page appears multiple times, a light orange background. Those pages are the ones you may want to check. Pages where you were the last to edit have a blue background (for most recent) or a light blue-green background (if the page appears multiple times).

A tweaked version of this script with lighter and more readable colours can be found at User:Venkat TL/ColourContrib

Wikipedia's standard watchlist[edit]

If you want to keep an eye on a limited number of articles and other pages (say a hundred or so), then the watchlist that Wikipedia provides each registered editor probably meets all your needs. Most active editors use this watchlist. You simply tell Wikipedia you want to monitor selected pages—articles, user talk pages, whatever. Then you run a report whenever you want to see if anyone has edited those pages since you ran your last report.

Note:
In Wikipedia, the term watchlist sometimes refers to the list of pages you've told Wikipedia you want to watch, and sometimes to the report that Wikipedia generates when you click the "my watchlist" link in your screen's upper right. For clarity, in this chapter "watchlist" refers to the list of watched pages, and "watchlist report" is what you get when you click the "my watchlist" link.

The standard watchlist report

Wikipedia offers you three different watchlist reports: standard, expanded, and enhanced. The expanded and enhanced reports build on the standard report. But if you're like many editors, the standard watchlist report (Figure 6-2) may meet all your monitoring needs. You get to it by clicking "my watchlist" (one of the six standard links in the screen's upper right corner, when you're logged on).

Figure 6-2. The standard watchlist report starts out in the "Display watched changes" view shown here. The number of edits listed is quite short, because this editor is watching only 21 pages, and because the watchlist report is set to show only the last 3 days of edits. (But you can change that setting; see the section about watchlist preferences.)
Note:
If you've been following along in Wikipedia and your watchlist report comes up empty, you have few or no pages on your watchlist. See the next section to learn how to add pages, and then come back here and read on.

The rows of article-related information in the watchlist report are very similar to the rows on a page history described in Chapter 5: Who did what: Page histories and reverting. There's a "diff" link to show what the edit did to the article, a "hist" link to go to the article's history page, the article or page name, the time edited, three links to pages of registered users (user page, user talk page, contributions page), and the edit summary.

What you can learn from your watchlist report

First, you can get an overview of how active your watched articles have been. In Figure 6-2, since you've told Wikipedia that you want to watch 21 pages, and only six show up in the report, you know that the other 15 pages haven't been edited in the past 3 days. So you don't have to check those 15 pages for activity.

Second, you can check out what happened in the six listed edits by simply clicking the "diff" link for each edit. If you find vandalism or other problems, then you can revert the edit (see the section about reverting) and take other corrective action. (Chapter 7: Dealing with vandalism and spam discusses additional steps for dealing with vandalism, beyond simply reverting it.)

Third, you can jump from this report to a history page because you want to see all the recent edits to a page. The watchlist report shows only the page's most recent edit. If, for example, there were three edits very close together, you wouldn't be able to see the other two; you have to click the "hist" link in a row to see the history of edits for the page that's listed in that row.

Finally, near the top of your watchlist report, you see two groups of links. One group ("View and edit watchlist", and so on) has links to related pages. The other group ("Show last 1 | 2 | 6 |12 hours", and so on) lets you tailor your watchlist report in different ways. Before looking at those links, however, it's important to understand how pages get on your watchlist in the first place.

Adding pages to your watchlist

Reading a page, editing a page, or even creating a page doesn't automatically put that page on your watchlist. To monitor that page for changes, you have to put it on your watchlist yourself. You can click something in three places to add the page. Figure 6-3 shows you those three places: where you edit or create a page, where you move a page, and where you're viewing a page.

Figure 6-3. Wikipedia gives you three ways to add a page to your watchlist. You can turn on a checkbox when you edit or move a page (top and middle), or, at the top of the page you're viewing, you can click the "watch" tab (bottom).

When you add a page to your watchlist, you're actually telling Wikipedia to watch two pages for you. That's because in Wikipedia, most pages have a corresponding talk page. For example, the South Africa article has a discussion page called Talk:South Africa associated with it; a project page such as Wikipedia:Sandbox is associated with the discussion page Wikipedia talk:Sandbox; the page Category:Uncategorized articles is associated with the discussion page Category talk:Uncategorized articles, and so on. When you pick one page of a pair (it doesn't matter which one), both pages show up in your watchlist report. It's normal Wikipedia behavior. You're free to ignore those extra pages when you read the report.

On the other hand, there are some pages you can't add to your watchlist; specifically, pages with the "Special" prefix, like the Special:Contributions page in Figure 6-1. These pages also don't have paired talk pages. "Special" pages are essentially on-the-fly reports—when you close such a page, it's gone. But then, there's no point in watching them anyway—they're not editable.

Tip:
To build a quick watchlist to learn how the whole thing works (or to follow along in this chapter), at the upper-left of the window, click the "Random page" link, click the "watch" tab, and then click "Random page" again, and so on.) Don't worry about whether you really want to monitor these pages, because, as discussed next, you can easily remove pages from your watchlist.

Removing pages from your watchlist

When you lose interest in watching an article, or when your watchlist gets too long and cumbersome, you can easily take one or more pages off it. You could, for example, temporarily remove part of your watchlist and save it elsewhere (to a subpage, or a non-Wikipedia document). Or you could use the removed links from your regular watchlist to create additional watchlists, as described in the section about multiple watchlists. Or you can just remove the pages from your watchlist and simplify your life.

You can see two links that let you remove pages from your watchlist near the top of Figure 6-2:

Figure 6-4. The "View and edit watchlist" link, from the watchlist report screen, leads to this straightforward page for removing pages from your watchlist.
Warning:
Wikipedia doesn't store a copy of your watchlist anywhere. Once you edit it, you can't recover or retrieve it. In case you have second thoughts about what you're deleting from your watchlist, you can copy and save a list of watched pages in, say, a user subpage or a word processing document on your computer.
Figure 6-5. One of the easiest ways to do mass edits of your watchlist is via the "Edit raw watchlist" option. You can get to this screen by clicking "Edit raw watchlist" on your watchlist report, or "edit the raw list" on the "Edit watchlist" page (Figure 6-4).

While the "View and edit watchlist" screen makes you click a checkbox for each page you want to remove, the "Edit raw watchlist" screen lets you select and delete wide swaths of the list as if you were editing a text document. As mentioned in the previous warning, you may want to save (in another place) any pages that you remove from your list. Unlike regular Wikipedia pages, your watchlist has no "history" page; you can't revert to an earlier version if you decide you've made a mistake.

Unwatching a page directly from your watchlist Report

Going to the "View and edit watchlist" page, turning on a checkbox, scrolling all the way down to the "Remove Titles" button at the bottom of the page, and returning to where you were on the watchlist report is a lot of work just to remove a single page from a list. You can modify the standard watchlist report so that you can delete a page directly from the report, with one click.

To make it so, copy the user script from User:js/watchlist and add it to your common.js page. (The section about adding scripts describes the steps to do so, including purging your cache to see the change take effect.)

When you're done, you see an "x" link in each entry on your watchlist report, immediately after the "diff" and "hist" links. Click the "x" to turn it into a "+", and the page is now no longer on your watchlist.

If you do the dynamic installation (which is recommended), you don't see this feature until you click the new "Unwatch ..." link, near the "Go" button toward the top of the page.

Modifying the standard watchlist report

You can modify the standard watchlist report in a number of ways, either temporarily or permanently. If you change it temporarily, using choices on the watchlist report page itself, the changes will be gone the next time you look at your report. If you change it permanently, using your preferences page, the changes will remain in place until you go to your preferences page again and make a further change.

When pages change (or not)

Confusingly, not all alterations to a page show up as changes on your watchlist report. Wikipedia considers a page changed when its wikitext (the text in the edit box) changes. What you see, however, when you look at a Wikipedia page is a combination of wikitext, text added via templates (for example, the standard text at the top of the sandbox in Figure 1-1 in the section about the sandbox), and images, which are stored on separate pages.

Because of this discrepancy, having an article on your watchlist doesn't guarantee that you'll see an edit appear on your watchlist report when vandalism occurs. If the article has either a template or an image, vandalizing one of them results in vandalism to the article from a viewer's perspective—but you won't know about it unless you happen to visit the article page.

Similarly, if you see vandalism while looking at an article and can't figure out where it came from by looking at the article history, consider checking the templates or images in the article.

So, if you watch a page, should you also figure out what templates are used on that page, and add those to your watchlist? Probably not. Frequently used templates are normally protected, which means only trusted users can edit them.

Temporary changes

You can change the information your watchlist report shows you without permanently editing your watchlist. Near the top of Figure 6-2, you can see links that let you make three types of temporary changes to your watchlist report. "Temporary" means that the next time you click "my watchlist", the changes are no longer in effect. However, if you just refresh the watchlist report in your browser, temporary changes remain in place. The three types of temporary changes are:

How far back you want to go with displayed changes depends on how much time and interest you have. The initial setting—3 days—is a pretty good choice. On the other hand, if you set the option to show more days, you're still free to ignore the older edits. To change the setting, just click 1, 3, or 7 to choose the number of days, or "all" to get the big picture.
If your watchlist report is fairly long, it's generally a good idea to shorten the report by hiding edits by bots and edits you've done yourself. Edits marked as "b", done by software bots, can be safely assumed to be boring cleanup, not anything that changes an article's meaning. And you may not need to see all your own edits, because you can remember what they are. (You probably want to leave these edits visible at first, until you have enough experience to judge whether you find them useful.)
Whether you want to hide the edits that were marked as "minor" by the editors doing them, or let these edits show on your report, depends a bit on your level of paranoia: Vandalizing edits rarely are marked as "minor", but (unfortunately) some experienced vandals do know this trick.
Changing this setting to show only changes to articles can make your life simpler, but it also hides useful information. If you put an article on your watchlist, you may learn even more about what's happening to the article by looking at postings to the article's talk page—that's where content disputes flame up. (See Chapter 10: Resolving content disputes for details.)
In fact, if you've been concentrating elsewhere and not monitoring your watchlist for a while, setting it to Talk, and then looking at postings going back a month or so, can be a good way to find articles where interesting things are happening.

Permanent changes via your preferences page

If you find yourself continually making the same temporary tweaks to your watchlist report, or if you think that the "all" option doesn't go back far enough in time, then visit your preferences page. There, you can change nine settings for the standard watchlist report, so that when it opens, it reads the way you want, not the way it automatically starts out.

To change the factory settings for your watchlist report, click the "my preferences" link (at the upper-right corner of the screen), then click the Watchlist tab. You'll see the page in Figure 6-6.

Figure 6-6. For your watchlist, there are nine different things you can change via the Watchlist tab of the Preferences page. Whenever you open your watchlist report, Wikipedia uses these settings to decide what to show you (until you return to this tab and change them again). The "3" and the "250" are the initial settings with which every user account starts out.

Of the nine settings you can change via your Preferences page, four are settings that you can also change temporarily, as discussed in the section about temporary changes, while you're viewing the watchlist report:

The next two settings, "expand watchlist to show all applicable changes", and its companion "Maximum number of changes to show in expanded watchlist", give you access to all changes ever made to an article. These options are discussed in the next section.

With the bottom three settings, you can have Wikipedia automatically add pages to your watchlist as you create, edit, or move them. They correspond to the checkboxes shown in Figure 6-3. With these settings set to "on", the respective checkboxes are automatically turned on, saving you the trouble of doing so every time.

Most experienced editors do want to watch pages they create, and pages they move. As for automatically adding articles you edit to your watchlist, that depends on the kind of editing you do. If you fix a lot of typos or work on problematical external links or make similar fixes to lots of articles, you probably don't want to turn on this setting. If you did, you'd have to constantly uncheck the "Watch this page" box—or see your watchlist fill up with tons of articles you never want to see again. On the other hand, if you restrict your editing to a limited range of articles and mostly make meaningful changes to the content, then you probably do want to turn on the setting to watch edited articles all the time.

Modifying the count of changed characters

Entries on your watchlist include a count of the increase or decrease in the number of characters on an edited page. A positive green number (+xx) shows how many characters have been added; a negative red number (-xx) shows the number of characters removed. These numbers can help you spot vandalism—for example, an anonymous IP editor removing a large amount of text is almost always vandalism.

You can modify these counts: Turn the numbers bold, or black, or remove them altogether. Doing so requires a change to a behind-the-scenes Wikipedia formatting page—your common.css page. You'll find details of the text you need to add to that page (which you probably need to create) at Wikipedia:Added or removed characters (shortcut: WP:AORC).

Expanded and enhanced watchlist reports

The standard watchlist report (Figure 6-2), shows only information about the most recent edit to each changed page. You can find out if there were multiple edits to a listed page—some of which might be problematical—only when you look at the history of the page, which requires additional steps. If you'd like to see all the edits that have occurred during the period shown in the watchlist report, you can change your settings to either the expanded watchlist report, or a variant of that, the enhanced watchlist report. These reports do show you all the edits during a period; they differ only in presentation. With both of them, therefore, you don't have to go to a history page.

Note:
If you don't have at least a couple of weeks of experience using your standard watchlist, this section may seem overwhelming. Know that your watchlist report can become more advanced, just as you will, and come back to this material later.

The expanded watchlist report

If you set your watchlist preferences to the expanded view (see the middle options in Figure 6-6), then the report automatically lists all changes to your watched pages during the specified period (for example, 3 days), or up to the maximum number of changes that you specify, whichever comes first. (For example, if you specify 100 changes, and there have been 125 changes in the past 24 hours, then you're not going to see 3 days of changes even if you've also specified that.)

The expanded watchlist report in Figure 6-7 has 10 entries, covering a total of six pages. By comparison, the standard watchlist report, covering exactly the same watched pages over exactly the same period, shows only six entries—one per watched page with editing activity (see Figure 6-2).

Figure 6-7. The expanded watchlist report lists all edits, not just the last edit, during a given period. You can see that report instead of the standard watchlist report shown here by turning on "Expand watchlist to show all applicable changes" in the Watchlist tab of your Preferences page.
Note:
If you're looking at your own watchlist, and what you see is similar to Figure 6-8, not Figure 6-7, then you've changed another setting in your preferences, and you're seeing the enhanced watchlist report rather than the expanded watchlist report. Read the next section to find out why.

The good news about an expanded watchlist report is that it can save you the time and trouble of going to history pages. The bad news is that the number of edits shown on your watchlist report could be many, many times what you'd see on the standard report (especially if your watchlist has a high percentage of pages that get edited frequently). For example, if the expanded report shows 2 days of changes, and one of the pages on your watchlist was edited 50 times during the last 24 hours, then all 50 changes show up.

Note:
You can also make temporary changes, like the ones for the standard watchlist report, discussed in the section about temporary changes, to expanded and enhanced reports. Likewise, preference settings also apply equally to all three kinds of reports.

If you like the idea of the expanded watchlist report (it sharply reduces your need to go to history pages) but don't like the added length (one row per edit), the enhanced watchlist report might appeal to you; read on.

The enhanced watchlist report

Expanded watchlist reports can get very long. Fortunately, you can shorten the watchlist report considerably, yet still have easy access to all changes to all watched pages during a specified period, by changing to the enhanced watchlist report format. Figure 6-8 shows the same information as in Figure 6-7, but in the enhanced format.

Figure 6-8. The enhanced watchlist report. This variant of the expanded watchlist report consolidates all edits into a single expandable row for each calendar day when changes to a page occurred.

To get this report, turn on the expanded report option in the Watchlist tab of Preferences, if it's not already on. Then, go to the "Recent changes" tab, turn on "Enhanced recent changes (JavaScript)", and then click the Save button. Be sure to follow the instructions at the bottom of the page for bypassing your browser's cache. For example:

Note:
If you change your settings, bypass your browser's cache, and still don't see the enhanced version of the watchlist report when you click "my watchlist", try shutting down your browser and starting it again. If that doesn't work, make sure that JavaScript is enabled in your browser (see the section about setting up your browser for JavaScript).

If you compare Figure 6-7 to Figure 6-8, you see that the 10 entries in the first have decreased to seven entries in the second. That's because an enhanced watchlist report has two types of lines (in addition to the header line for each day): detail lines and summary lines. If an article has been edited only once on a given day, you see a detail line. If it was edited multiple times, you see a summary line that tells you the number of edits, and the editors' names.

Figure 6-8 has three summary lines, as indicated by a right-pointing arrow on the far left. Examining these three lines more closely, here's what you can tell happened:

Say you want to see more details on the two edits of the article Stream Energy. Click the right-pointing arrow next to the summary line, and two detail lines appear (Figure 6-9).

Figure 6-9. When you click a summary line in an enhanced watchlist report, the right-pointing arrow changes to a down-pointing arrow, and details lines appear immediately below. Here, one of the summary lines in Figure 6-8 has been expanded.

The information in Figure 6-9 doesn't give you much of a clue as to whether this was a vandalizing or other problem edit—note the lack of edit summaries. To inspect the changes, either click the "last" links, which produce diffs (see the section about diffs) or click the "Page history" link, and then, when at the history page, combine the two edits into a single diff.

Choosing your watchlist report format: Standard, expanded, or enhanced?

So, which watchlist report format should you use? You can easily change from the standard report to the enhanced watchlist report, or vice versa. Just change and save your preference settings, and bypass the browser cache (see the section about saving edits), so you can just play around and see what you like. If you have relatively few pages on your watchlist, the expanded watchlist is great for a full overview at a glance. If your expanded reports get too long, or you prefer to have page changes grouped by page, try the enhanced watchlist report. If none of the three report versions meets your needs, then take a look at the options in the rest of this chapter: multiple watchlists and real-time monitoring.

Watchlists are private

You can't see any other editor's watchlist, nor can any other editor see yours. Wikipedia watchlists are entirely private. That's why, if you erase yours, no one can restore it for you.

Perhaps more interestingly, there is no way for you, as a regular editor, to find out the names of other editors who are watching a given page. You can find out the number of editors who are watching a page using the watcher tool, but only if that number is at least 30. The tool won't tell you about pages with less than 30 watchers, as watchlists are one of the main defenses against vandalism, and vandals would appreciate knowing which pages were poorly watched.

Multiple watchlists[edit]

When you click the "my watchlist" link, you go to your one and only "official" watchlist, and the accompanying report (standard, expanded, or enhanced). But you're not constrained to a single watchlist. For example, you could have a watchlist for articles you've created, one for editors you're watching for signs of repeated vandalism, and one for group of articles in a wikiproject you're working on, plus your "official" watchlist. Additional watchlists aren't quite as easy to create and maintain as your regular watchlist, but if you're watching a lot of pages, the extra organizational power may be worth the extra bother.

Creating additional watchlists

Creating a second (or third or fourth) watchlist is a two-step process: Create a subpage (see the section about creating a personal sandbox); then add wikilinks for the pages of interest. You can add wikilinks in a number of ways. For example, you can add them by copying from your raw watchlist (see the section about removing from your watchlist).

Note:
Additional watchlists are sometimes called "public" watchlists because other editors can view them.

Figure 6-10 shows a subpage set up for an additional watchlist. If you watch pages on additional watchlists like this one, then you can remove them from your regular watchlist. You can, for example, shorten that watchlist to the absolutely most critical pages to monitor, and use your additional watchlists to monitor less-important articles as time permits.

Figure 6-10. Here's a subpage set up as a second watchlist. If you want paired talk pages, you need to be add them manually, because they're not included automatically on watchlist reports that use watchlists you create yourself. See the box about adding talk pages for a quick way to add the talk pages.
Adding talk pages to additional watchlists

Unlike the standard watchlist report, additional watchlists don't automatically monitor paired pages. For example, if you have the article Loch Ness monster in your additional watchlist, changes to the Talk:Loch Ness monster page don't show up on the watchlist report. That's a problem, because, in most cases, you really do want to monitor both pages in a pair. The only solution is for you to add both a page and the related talk page. If you already have a long list of articles in wikilinks, there's a quick way to add talk pages:

  1. Copy the list of links to a spreadsheet, or to a table in a word processing document.
  2. Copy the column of the links to a second column.
  3. Use find/replace on the first column to change [[ into *[[.
  4. Use find/replace on the second column to add , [[Talk: to replace [[.
  5. Merge the two columns, and then paste the merged results into your subpage.

Using additional watchlists

Once you've set up an additional watchlist, as in Figure 6-10, you can use it to generate a watchlist report in two short steps:

  1. Go to the subpage that has the watchlist.
  2. Click the "Related changes" link on the left side of your screen. (It's the second link in the "toolbox" set of links. It's not the "Recent changes" link in the "interaction" set of links.)
What you see depends on the setting in the "Recent changes" tab of your Preferences page—either an expanded report, as in Figure 6-7, or an enhanced report, as in Figure 6-8.
Tip:
Clicking "Related changes" for a page you've set up as an additional watchlist works for any page in Wikipedia, since the software has no idea whether a page is a watchlist or not. Say, for example, you want to monitor changes to any articles in a particular category. Just go to the category page (see the section about categorisation), and then click the "Related changes" link. You see the most recent edits for all listed articles.

Real-time monitoring alternatives[edit]

All the watchlist reports described so far in this chapter are snapshots of edits at a moment in time. Their information is current as of when you create the report, but they don't update themselves as edits are made. If you want to watch edits as they occur, consider receiving real-time updates for pages you want to watch. You use either standard web feeds, or monitor changes to pages on your regular watchlist using Lupin's Anti-vandal tool (User:Lupin/Anti-vandal tool).

RSS and Atom

Wikipedia supports two kinds of web feeds: RSS and Atom. A web feed is an automated way to get copies of changes to web pages of your choice. For example, you can sign up to get new postings to a blog, saving you the trouble of checking the blog every day. You read such notifications in a feed reader—also called a feed aggregator or just an aggregator—a specialized application on your computer.

For RSS and Atom, you have two choices. The standard way is subscribe to individual pages. But you may also be able to use a feed to get notification of changes to your watchlist (see the box about watchlist feeds).

Standard RSS and Atom feeds

Figure 6-11. Top: To request an Atom feed for a specific article or other page, click the "history" tab for that page, and then look at the toolbox on the left side of the screen for the link to click: Bottom: Once you click "Atom", what you see depends entirely on your browser. Shown here is the top of the page of what Firefox 2.0 (on Windows XP) displays. Note that recent versions of Firefox do not support this, and will instead show you a large block of XML code.

The most straightforward way to get a web feed for pages you want to watch is to subscribe on a page-by-page basis to those pages. As with additional watchlists (see the section about multiple watchlists), if you want to watch both a page and its associated talk page, you have to subscribe to each separately. The link for the Atom feed is available on each page's page history tab. Click the "history" tab and look for the link on the left side of the screen (see Figure 6-11). To subscribe to the page, click the Atom link. Your browser may then give you the option of subscribing (exactly what you see depends on your browser).

Most feed-readers can handle Atom feeds. However, if you need an RSS feed instead, right-click the Atom link and choose your browser's option to copy the link address or location. Paste the address into your address bar (e.g. by pressing Ctrl+V) and replace 'atom' with 'rss'. Then press the Enter key to load the RSS feed.

Keep in mind that Wikipedia's web feeds include only the changed part of a page—in other words, the top part of a standard diff. That keeps the size of the text being sent via the feed to a reasonable amount, but it means that you can't see what the entire article looks like after the edit occurred. (If you do want to see the full diff, just click the link at the bottom of the item in the feed.)

A feed for your watchlist

It's easy to monitor changes to your standard and additional watchlists in real time, if you want to. For your standard watchlist, just go to your watchlist report, then click the 'Atom' link in the toolbox on the left. For your additional watchlists, the Special:RecentChangesLinked page also has a RSS/Atom feed. As with feeds on regular article pages, you will need to edit the URL to replace 'atom' with 'rss' if you need an RSS feed instead of an Atom feed.

Tip:
You'll find more information about RSS and Atom feeds at the page Wikipedia:Syndication (shortcut: WP:XML).

Lupin's Anti-vandal tool

Lupin's Anti-vandal tool is a solid real-time monitoring tool that uses your existing watchlist. This tool, described on the page User:Lupin/Anti-vandal tool, is a script (see Chapter 21: Easier editing with JavaScript) intended primarily for vandal-fighting, but you can also use it to identify spelling errors. More to the point, one of the vandal-fighting options is to use the tool to monitor changes to pages on your watchlist. As shown in Figure 6-12, you get a list of changes, plus checkboxes at the top that let you choose what kinds of edits you want to see.

If you don't have many pages (or many active pages) on your watchlist, you might end up scrolling for pages and pages before you see any entries for editing activity. To put it numerically, this tool reports on edit changes every 30 seconds. Let's say that your expanded watchlist report showed 24 changes in a 24-hour period—one change per hour. For that same 24-hour period, this tool would show at least 2,856 status reports with no activity, and 24 or fewer status reports with one or more edits.

Figure 6-12. The User:Lupin/Monitor my watchlist page has a scrolling list of edits of pages on your watchlist. At the top are a number of options. For example, you might want to turn on "Ignore talk pages" and "Ignore pages outside the article namespace" because you're focusing solely on vandalism to articles themselves.

Implementing this tool is very straightforward:

1. Copy the one-line script importScript("User:Lupin/recent2.js"); to your common.js file, and then save the change.

See Chapter 21: Easier editing with JavaScript for details about implementing user scripts.

2. Bypass your cache. See the linked page for instructions.

You should see five new items in the "toolbox" set of links on the left side of the screen (see Figure 6-13). When you click the "Monitor my watchlist" link in Figure 6-13, you go to the User:Lupin/Monitor my watchlist page in Figure 6-12.
Figure 6-13. After you install Lupin's Anti-vandal tool and purge your cache, your "toolbox" (on the left side of the screen) has five new links. You use the "Monitor my watchlist" link to get a real-time display of changes to pages in your watchlist.
Note:
Three potential alternatives for real-time information aren't available: An Internet Relay Chat (IRC) feed of page changes limited to pages on your watchlist; an Instant Message (IM) feed (of any type); and email notifications of page changes. The last of these in fact is built into Wikipedia's underlying software, but has been turned off in the English Wikipedia. (The English Wikipedia has hundreds of thousands of edits per day, so this feature could potentially generate millions of outgoing emails every day from Wikipedia servers.)
Top of page
Categories