Kirwin Irrigation District No. 1 organized in 1950. A massive flood of the entire Kansas River basin stoked public demand for flood control infrastructure. In response, the U.S. Congress passed an appropriation act directing the immediate construction of Kirwin Dam and Reservoir for flood control, but allowing for further study before starting irrigation operations. Construction of Kirwin Dam began in March 1952 and lasted until completion of the project in August 1955.[5] Storage of water in the reservoir began in October 1955.[6] The next month, contractors started building Kirwin Canal and its extensions east of the dam, finishing construction in January 1958.[6][5]
Kirwin National Wildlife Refuge was established in 1954 as an overlay project on the flood control and irrigation efforts at the site.[5] The first such national refuge in Kansas, it was created to conserve and manage local wildlife, specifically migratory birds.[7]
Kansas Highway 9 runs generally east-west north of the reservoir. East 1100 Road, a paved county road, runs generally north-south immediately east of the reservoir.[10]
There is one settlement at the reservoir: Kirwin, Kansas, located immediately below the dam.[10]
Hydrography
The surface area, surface elevation, and water volume of the reservoir fluctuate based on inflow and local climatic conditions.[3] In terms of capacity, the Bureau of Reclamation vertically divides the reservoir into a set of pools based on volume and water level, and it considers the reservoir full when filled to the capacity of its active conservation pool.[2][3] When full, Kirwin Reservoir has a surface area of 5,079 acres (20.55 km2), a surface elevation of 1,729 feet (527 m), and a volume of 98,154 acre⋅ft (121,071,000 m3).[2] When filled to maximum capacity, it has a surface area of 14,660 acres (59.3 km2), a surface elevation of 1,773 feet (540 m), and a volume of 511,757 acre⋅ft (631,243,000 m3).[11]
The streambed underlying the reservoir has an elevation of 1,662 feet (507 m). Since the reservoir's initial flooding, sedimentation has gradually accumulated on the reservoir bottom thus raising its elevation.[2]
Infrastructure
Kirwin Dam is a rolled earth-fill embankment dam with a structural height of 169 feet (52 m) and a length of 12,646 feet (3,855 m).[5] At its crest, the dam has an elevation of 1,779 feet (542 m).[2] A concrete spillway controlled by 15 gated sluiceways is located at the south end of the dam. It empties into a short channel which joins the North Fork Solomon River east of the dam. Outlet works through the dam, including a stilling well, empty directly into the river and the Kirwin Main Canal. When the reservoir is at maximum water surface elevation, the spillway has a discharge capacity of 96,000 cu ft/s (2,700 m3/s). The canal outlet has a discharge capacity of 175 cu ft/s (5.0 m3/s), and the river outlet has a capacity of 100 cu ft/s (2.8 m3/s).[5]
The Kirwin Main Canal extends east from the dam for 13.4 miles (21.6 km) on the north side of the river. It then branches into the Kirwin North Canal, which continues for another 14.3 miles (23.0 km), and the Kirwin South Canal, which crosses the river in a siphon and continues along its south side for another 16.3 miles (26.2 km). 38 miles (61 km) of lateral canals extend outward from all three central canals. The entire network provides irrigation to 11,435 acres (46.28 km2) of land.[5]
Kirwin Reservoir is open for sport fishing year-round. The Fish and Wildlife Service permits hunting for waterfowl and upland game during appropriate seasons.[5]
