Kulekhani Reservoir
The reservoir, Indra Sarobar Kulekhani dam also known as "Indra sarobar", Makwanpur, Nepal
Location of Kulekhani Reservoir in Nepal
Country	Nepal
Location	Kulekhani, Indrasarowar Rural Municipality, Makwanpur District, Bagmati Province
Coordinates	27°35′25″N 85°9′21″E / 27.59028°N 85.15583°E / 27.59028; 85.15583
Purpose	Power
Status	Operational
Construction began	1977
Opening date	1982; 42 years ago (1982)
Construction cost	US$117.84 million
Owner(s)	Nepal Electricity Authority
Dam and spillways
Type of dam	Embankment, rock-fill
Impounds	Kulekhani River
Height	114 m (374 ft)
Length	397 m (1,302 ft)
Elevation at crest	1,534 m (5,033 ft)
Width (crest)	10 m (33 ft)
Dam volume	4,400,000 m³ (5,800,000 cu yd)
Reservoir
Creates	Kulekhani Reservoir (Indra Sarobar)
Total capacity	85,300,000 m³ (69,200 acre⋅ft)
Active capacity	73,300,000 m³ (59,400 acre⋅ft)
Inactive capacity	12,000,000 m³ (9,700 acre⋅ft)
Catchment area	126 km² (49 sq mi)
Surface area	2.2 km² (0.85 sq mi)
Maximum length	7 km (4.3 mi)
Normal elevation	1,530 m (5,020 ft)
Kulekhani-I Hydropower Station
Coordinates	27°32′24.81″N 85°6′48.82″E / 27.5402250°N 85.1135611°E / 27.5402250; 85.1135611
Commission date	Kulekhani I: 1982 Kulekhani II: 1986 Kulekhani III: 2019
Type	Conventional, diversion
Hydraulic head	Kulekhani I: 550 m (1,800 ft) Kulekhani II: 284.1 m (932 ft) Kulekhani III: 102.56 m (336.5 ft)
Turbines	Kulekhani I: 2 x 30 MW Pelton-type Kulekhani II: 2 x 16 MW Francis-type Kulekhani III: 2 x 7 MW Francis-type
Installed capacity	Kulekhani I: 60 MW Kulekhani II: 32 MW Kulekhani III: 14 MW (est.) Total: 106 MW
Annual generation	Kulekhani I: 211 GWh Kulekhani II: 104.6 GWh Kulekhani III: 40.85 GWh (commissioned in 2019)

The Kulekhani Dam is a rock-fill dam on the Kulekhani River near Kulekhani in the Indrasarowar Rural Municipality of Makwanpur District in Bagmati Province, Nepal. The primary purpose of the dam is hydroelectric power generation and it supports the 60 MW Kulekhani I and 32 MW Kulekhani II Hydropower Stations. Construction began in 1977 and Kulekhani I was commissioned in 1982. Kulekhani II was commissioned in 1986 and a third power station, the 14 MW Kulekhani III was expected to be commissioned in May 2015 but was delayed due to issues with the builder. The US$117.84 million project received funding from the World Bank, Kuwait Fund, UNDP, Overseas Economic Cooperation Fund and OPEC Fund. It is owned by Nepal Electricity Authority.^[1]^[2]

The 114 m (374 ft) tall dam creates a reservoir called Indra Sarobar which stores 85,300,000 m³ (69,200 acre⋅ft) of water.

Kulekhani I hydropower station

From the reservoir, water is sent to the Kulekhani I Hydropower Station via a 5.8 km (3.6 mi) headrace tunnel to a gate house which controls the flow of water to the power station. From the gate house water travels down a 1,340 m (4,400 ft) long penstock where it reaches the underground power station. It contains two 30 MW Pelton turbine-generators. The difference in elevation between the reservoir and the power station affords a net hydraulic head of 550 m (1,800 ft).

Kulekhani II hydropower station

Water discharged from the Kulekhani I power station enters a series of tunnels and diversions where it reaches the Kulekhani II Hydropower Station which is also located underground and contains two 16 MW Francis turbine-generators. The elevation difference between the reservoir and the power station affords a net hydraulic head of 284.1 m (932 ft). The dam and reservoir are in the Bagmati River basin while the power stations are in the Rapti River basin.^[1]

Kulekhani III hydropower station

Construction of the Kulekhani III Hydropower Station had been underway since 2008 and is now finally complete as of 2019.^[3] The Nepal Electricity Authority (NEA) had extended the completion deadline of the Kulekhani 3 Hydropower Project for the fifth time to January 2018 as construction was running late due to its slowpoke contractor.^[4] The project’s civil contractor Sino Hydro has completed 100 percent of the construction, and there has been full progress in the installation of the turbine, water gate and transmission lines to evacuate the electricity generated by the plant. It will use the tailwaters of Kulekhani II and have an installed capacity of 14 MW.^[5]