Langley Mill
General information
Location	Langley Mill, Borough of Amber Valley England
Grid reference	SK449470
Managed by	East Midlands Railway
Platforms	2
Other information
Station code	LGM
Classification	DfT category F1
Key dates
6 September 1847	Opened as Langley Mill for Heanor
1 November 1876	Renamed Langley Mill and Eastwood
11 September 1933	Renamed Langley Mill and Eastwood for Heanor
2 January 1967	Closed
12 May 1986	Reopened as Langley Mill[1]
Passengers
2018/19	93,078
2019/20	92,144
2020/21	16,998
2021/22	64,610
2022/23	80,058
Notes
Passenger statistics from the Office of Rail and Road

Langley Mill railway station (formerly known as Langley Mill for Heanor and Langley Mill and Eastwood) on the Erewash Valley Line serves the large village of Langley Mill and the towns of Heanor in Derbyshire and Eastwood in Nottinghamshire, England. The station is 12 miles (19 km) north of Nottingham.

The station lies between Nottingham and Sheffield and is managed by East Midlands Railway.

Services

Northern Trains run an hourly service between Nottingham and Leeds via Sheffield that stops at Langley Mill.^[2] This service started from the December 2008 timetable change.

East Midlands Railway operate a few services per day from Langley Mill southbound to Nottingham and beyond (usually Norwich) and northbound to Sheffield (usually continuing to Liverpool Lime Street).

Buses that serve Langley Mill are Rainbow 1, 33, 34 and others that can be found on the Trent Barton website.

Preceding station		National Rail		Following station
Ilkeston		Northern Trains Nottingham-Leeds		Alfreton
		East Midlands Railway Liverpool-Norwich Limited Service

Facilities

The station is unstaffed and has two offset platforms (linked by underpass), with platform 1 (for Chesterfield and Sheffield) the more southerly of the pair. There are no permanent buildings other than standard waiting shelters; there is no ticket machine available, so all tickets must be purchased prior to travel or on the train. Digital CIS displays, automatic announcements, timetable poster boards and customer help points on each side provide train running information. Step-free access is only available to platform 1 (via ramp, platform 2 is reachable only by stairs).^[3]

History

The station was opened on the Erewash Valley Line by the Midland Railway in 1847 and known as Langley Mill for Heanor. However, in 1876, the GNR built Eastwood and Langley Mill on its branch from the Derbyshire and Staffordshire Extension at Awsworth Junction. The Midland station then became Langley Mill and Eastwood.

In 1895, the Midland built a line from here through Heanor to Ripley with an adjacent station of its own. This was not profitable and closed in May 1926.

It was closed to passenger traffic on 2 January 1967 as a result of the Beeching Axe (along with Ilkeston Junction and Cossall, Alfreton and all the other remaining local stations on the same route),^[4] but was subsequently reopened by British Rail in May 1986.^[5] The former station (which was demolished after closure) had platforms opposite each other and was located on the site of the present platform 2. A new northbound platform had to be provided when the station was rebuilt, as the former site north of Station Road had been redeveloped. This is located close to where the old Ripley branch line platform once stood.^[6]

Stationmasters