A Leslie cube (left) and a thermal detector (right)

Leslie's cube is a device used in the measurement or demonstration of the variations in thermal radiation emitted from different surfaces at the same temperature.

Device

It was devised in 1804 by John Leslie (1766–1832), a Scottish mathematician and physicist.[1] In the version of the experiment described by John Tyndall in the late 1800s,[2] one of the cube's vertical sides is coated with a layer of gold, another with a layer of silver, a third with a layer of copper, while the fourth side is coated with a varnish of isinglass. The cube is made from a solid block of metal with a central cavity. In use, the cavity was filled with hot water; the entire cube has essentially the same temperature as the water. The thermal detector (on the far right in the figure) showed much greater emission from the side with varnish than from any of the other three sides.

The upper photographs of Leslie's cube (in color) are taken using an infrared camera; the black and white photographs underneath are taken with an ordinary camera. The face of the cube that has been painted black emits thermal radiation strongly. The polished face of the aluminum cube emits much more weakly, and the reflected image of the warm hand is clear.

In contemporary terms, the emissivities of shiny metals are low. Isinglass is an organic glue, and has a much larger emissivity than the metals. Leslie's cube is still in use to demonstrate and measure the variations in emissivities for different materials.[3] In the figure, the false color images ("thermographs") of a cube at about 55 °C were taken with an infrared camera; the black and white photographs are taken with an ordinary camera. The black face of the cube is highly emissive, as indicated by the reddish color of the thermograph. The mirror-like, polished face of the aluminum cube emits thermal radiation weakly, as indicated by the blue color. The reflection of the experimenter's hand is green, which corresponds to a high emissivity surface near body temperature (37 °C). The photographs also show that the white painted surface is nearly as emissive as a black surface.

FUNcube-1 in the cleanroom before launch

A modern version of Leslie's Cube is part of the structure of a small earth-orbiting satellite known as FUNcube-1 and registered as a Dutch spacecraft. Launched in November 2013, it demonstrates the absorption and emission of solar radiation in space as the satellite orbits in full sunlight, eclipse and rotates around its three axes.[4]

See also

References

  1. ^ Leslie, John (1804). An Experimental Inquiry into the Nature and Propagation of Heat. Edinburgh: J. Mawman. pp. 36–48.
  2. ^ Tyndall, John (1915). Heat a Mode of Motion (6 ed.). D. Appleton. p. 297. The preface to this book is dated 1886; it appears to be a reprinting of an earlier version.
  3. ^ Vollmer, Michael; Möllmann, Klaus-Peter (2011). Infrared Thermal Imaging: Fundamentals, Research and Applications. John Wiley & Sons. pp. 36–38. ISBN 9783527641550.
  4. ^ "Welcome to the FUNcube website". Retrieved 2014-07-20.

Further reading

Draper's 1861 description of the Leslie cube
Categories