Long Bridge is the common name used for three successive bridges connecting Washington, D.C. to Arlington, Virginia over the Potomac River. The first was built in 1808 for foot, horse and stagecoach traffic, and bridges in the vicinity were repaired and replaced several times in the 19th century. The current bridge was built in 1904 and substantially modified in 1942. It has only been used for railroad traffic and is owned by CSX Transportation. It is used by CSX freight trains, Amtrak intercity trains and Virginia Railway Express commuter trains. Norfolk Southern Railway also has trackage rights on the bridge but does not currently exercise those rights.[2] In 2019 Virginia announced that it would help fund and build a new rail bridge parallel to the existing one to double its capacity, following the plans that have been studied by the District Department of Transportation (DDOT) and Federal Railroad Administration (FRA) since 2011.[3]
History
Washington bridge (1809-1870)
The first bridge at this location was the "Washington Bridge", a wooden toll bridge. The Washington Bridge Company was authorized on February 5th 1808 by the District Commissioners and an Act of Congress with the purpose of shortening the distance in the country's main mail route.[4][5] President Thomas Jefferson signed it into law soon after. It was built to provide foot, horse and stagecoach traffic to Washington City.[6] It was the second bridge to cross the Potomac in the District of Columbia, following a 1797 span at a narrower crossing near Little Falls, upstream of Georgetown, at the site of the present Chain Bridge. At the time it opened and also in the official documents, it was referred to as Washington Bridge, Potomac Bridge or simply "the Bridge" but by the 1830s it began to be called the "long Bridge across the Potomac" to distinguish it from the shorter bridge near Little Falls.[7][8] Over time, the colloquial name was shortened to just "Long Bridge".
Built as a timber pile structure with two draw spans, it connected the city of Washington to Alexandria County. The bridge opened to traffic on May 20, 1809 and, at 5,000 ft (1,500 m) long or a mile including the abutments, was the longest bridge in the United States at the time.[9] On the city of Washington side, it landed at the end of Maryland Avenue SW near 14th Street SW. Before the bridge was built, only a ferryboat connected the city of Washington and Alexandria County. The ferryboat ride made for a treacherous crossing when the river froze as the river was very wide.[6] The bridge was 36 ft (11 m) wide, with 29 ft (8.8 m) for the broad carriageway in the center. The rest was for walkways on each side, protected from center traffic by a guardrail. It was built on 201 piers, with 20 lamps, a 25 ft (7.6 m) wide draw on one side and a 35 ft (11 m) wide one on the other. A 100 ft long (30 m) wharf was constructed near one of the draws.[10][9]
A board of commissioners oversaw the subscription of stocks to raise capital for the build, not to exceed $200,000, equal to $3,664,167 today.
A toll was put in place with prices set by Congress and posted at the bridge for up to 60 years after opening:
Foot passenger: 6 1/4 cents (equivalent to $1.17 in 2022)
Person and horse: 18 3/4 cents (equivalent to $3.51 in 2022)
Chaise, sulky or riding chair: 37 1/2 cents (equivalent to $7.02 in 2022)
Coach, coachee, stage-wagon, chariot, phaeton or curricle or other riding carriage: 100 cents with an additional 12 1/2 cents for each horse or other animal (more than two) pulling the carriage (equivalent to $18.71 with an additional $2.34 each in 2022)
Four-wheeled cart, dray or other two-wheeled carriage of burthen: 18 3/4 cents with an additional 12 1/2 cents for each horse or other animal (more than one) pulling the cart (equivalent to $3.51 with an additional $2.34 each in 2022)
Sheep or swine: 3 cents each (Only one person per team or drove passes for free) (equivalent to $0.56 in 2022)
Horse or neat cattle not pulling a coach or cart or with a rider: 6 1/4 cents (Only one person per team or drove passes for free)[5](equivalent to $1.17 in 2022)
No toll was to be collected for:
Vehicles and passengers with property of the United States
Troops of the United States, Militia, state, or District of Columbia marching in a body, any cannon or equipment belonging to the United States[5]
On August 24, 1814 following the Battle of Bladensburg during the War of 1812 the President, officers of the country and American troops used it to retreat to Virginia and burnt the south end of the bridge behind them. The next day, British troops burned the north end of the bridge as they entered the City of Washington. The bridge was repaired by 1818.[11]
Purchase by the United States
On February 22, 1831, high water and ice carried away several spans of the bridge, leading to closure and bankruptcy of the bridge company.[12] The following year, Congress purchased the bridge for $20,000 (equal to $549,625 today), and appropriated $60,000 to repair it. However, more funds would be needed to complete the project and the total cost was $114,126.[6][10][11]
On October 30, 1835, the bridge was reopened with President Andrew Jackson and his Cabinet present. It was to remain in its current state until the mid-1850s. In March 1847, the Virginia Assembly voted to formally accept the retrocession of Alexandria and Arlington, and thus the south approach of the bridge became part of Virginia.
After 1835, the B&O Railroad was provided access to Washington City through the Northeast quadrant. There were several attempts to bring the railroad to Alexandria City.[6] The A&W Railroad connected the B&O Railroad New Jersey Avenue Station located on Capitol Hill to the Long Bridge on the north shore by 1855 and in Alexandria by the end of 1857. However, the Virginia legislature had banned any other connections and tracks were not placed on the bridge. Goods were offloaded, transported over the bridge in omnibuses over the bridge and reloaded on the other side.[6]'
Survey of the Potomac showing the Potomac Bridge in 1837
Chart showing the Long Bridge in 1838 also showing the islands visible at low water
Map showing the Potomac Bridge in 1839
Map of the city showing the Long Bridge in 1850
Civil War
Fort Jackson and Long Bridge on an 1865 map
In 1860, the President of the B&O company had requested, and been denied, permission to reinforce or replace the bridge.[13] The beginning of the Civil War in 1861, and the secession of the state of Virginia on May 23, 1861, made the military value of the bridge evident. On May 25, 1861, 13,000 Union troops moved in to take control of the bridge along with Alexandria and its railroad. Under the command of Colonel John G. Barnard, Fort Jackson (Virginia) was built to guard the bridge to avoid the passage of spies and invasion by the Confederates with four cannons present in the fort.[6][14]
Competition between railroads became sharper in the District of Columbia, Maryland and Virginia, as the Pennsylvania Railroad sought to break B&O's monopoly in the District. Local and federal politics along with personal interests of politicians made it possible for the newcomer to gain access to the city. Pennsylvania Senator Simon Cameron, a stockholder in the PRR-owned Northern Central Railroad, served as Secretary of War from 1861 to 1862, when he was fired due to charges of payoffs and other irregularities, and helped the railroad gain control of the bridge. The PRR was financing the Baltimore and Potomac Railroad (B&P) to get in the District.
At the direction of the military in early 1862, new tracks were laid for the approaches, the rail bed was repaired and tracks were laid across the bridge. The new connection opened on February 9, 1862.[15] On February 11, 1862, Daniel McCallum was appointed Military Director and Superintendent of the Union railroads, with the staff rank of colonel, by Secretary of WarEdwin M. Stanton. McCallum had authority to "enter upon, take possession of, hold and use all railroads, engines, cars, locomotives, and equipment that may be required for the transport of troops, arms, ammunition, and military supplies of the United States, and to do and perform all acts... that may be necessary and proper... for the safe and speedy transport aforesaid," he wrote in an 1866 report.[16] It quickly became obvious the structure would not be able to withstand heavy loads. Lightly loaded railroad cars were transshipped over the bridge and pulled by horses.
General Daniel McCallum (with the beard) on the Long Bridge looking toward Alexandria, VA
Long Bridge in 1863 looking toward Washington, DC
Long Bridge around 1865 looking toward Washington, DC
Long Bridge looking toward Washington, DC between 1863 -1865 (no rails on the new span)
The old span (left) and the new (right) Long Bridge after rails were moved over in 1865 looking toward Washington, DC
Union troops guarding the Chain Bridge over the Potomac River to Virginia
Railroad Bridge
On July 23, 1864, a new, stronger bridge, built by the Washington, Alexandria and Georgetown Railroad Company was completed about 100 feet (30 m) downriver. Work on the 5,104 ft long (1,556 m) bridge began in June 1863 and built a bridge with 203 spans and two 82 ft long (25 m) draws, completed without rails.[17][18] On February 18, 1865, the U.S. Military railroad engine Charles Minot was crossing the old bridge when its weight caused the span to fail. The failure was such that the military decided it was easier and important enough to take possession of the new bridge and install rail on it than repair the old one.[15] The rails were moved to the new bridge - which was then called Railroad Bridge - and the old bridge - then Turnpike Bridge - became used for non-rail traffic only, as had been recommended in the prior year.[15][19][20][21][6][22]
Railroad Bridge opened on February 21, 1865 and carried only railroad traffic. On November 15, 1865, with the end of the war, the U.S. Military Railroad gave the bridge to the U.S. Department of the Interior and the new bridge became part of the Washington, Alexandria and Georgetown Railroad, leased by the B&O.[15]
Sometimes the two bridges were referred to separately as the Long Bridge and the railroad bridge and at others as two parts of one "Long Bridge".[23]
During the war, wounded Union soldiers were carried across the bridge to hospitals set up all over the city. The closest was Armory Square Hospital, a few blocks from the bridge.
Both the Turnpike Bridge and the Railroad Bridge were damaged in the 1870 flood. Railroad Bridge was partially repaired and continued to be used until May 14, 1872, when a new bridge replaced it.[24] It was then removed in late 1872.[25]
The railroad span after rails were moved to it in 1865
1872 Long Bridge (1872-1906)
An October 1, 1870 flood damaged the existing bridges beyond repair, with much of the causeway, wooden superstructure and spans carried away.[21] Prior to the flood, the Baltimore and Potomac Railroad Company had been given the rights to the bridges on the condition that they maintain them.[4] Immediately following the flood they chose to build a replacement bridge which they worked on from November 1870 until it opened on May 15, 1872. The day the new bridge opened, the old railroad bridge, which had been partially repaired, was closed.[26][27] The new bridge was 36 ft (11 m) wide with both a carriageway and a railway, 9 ft (2.7 m) above the water, and nearly a mile long with solid abutments built of sandstone from Freestone Point and blue gneiss from the quarries above Georgetown. The draws were 61 and 96 ft (19 and 29 m) long. The bridge had three parts, a 700 ft long (210 m) bridge over the Washington Channel, a 2,000 ft long (610 m) bridge over the Virginia Channel and a 1,980 ft long (600 m) earth causeway between masonry walls on the flats between the channels.[4][28]
Despite the new design the 1872 bridge continued to be damaged by freshets, it blocked river traffic and was not wide enough for two tracks.[28] On February 12, 1881, ice freshets damaged the bridge by taking out three spans. It re-opened for traffic on February 19, 1881[30] In 1884, the bridge was rebuilt and strengthened.[31][32] On February 7, 1895, the Evening Star reported that the Potomac was frozen near the docks. The ice was five inches thick with an extra two inches of snow on top. The ice was being blocked by the Long Bridge. The bridge acted as a sort of dam and created conditions that could lead to a flood. It had cost the District Government $5,000 to clear the ice in 1893.[33] Within 30 years, the railroad and regional leaders began making plans for a replacement.
On June 30, 1891, the B&P Railroad granted the Chesapeake & Ohio Railway trackage rights over the bridge to its Washington station[34] On August 1, 1895, the B&P Railroad granted the use of the bridge to the Washington, Alexandria, and Mount Vernon Electric Railway (streetcars). Power cables were hung and the rent set to $25,000 a year.[35]
On February 19, 1898, the Washington Terminal Railway Company incorporated in Virginia, a joint venture of the PRR, RF&P, ACL, Southern Railway and C&O but not the B&O. It acquired the property of the Washington Southern Railway, the B&P Railroad terminals in Washington and Long Bridge.[36] Two years later, on July 31, 1900, a New Jersey holding company was formed between PRR, ACL, Southern Railway, C&O, Seaboard Air Line Railway and B&O to control the line between Richmond, VA and the Long Bridge.[37]
A new railroad bridge was constructed in 1904 and the 1872 Bridge remained in use for vehicles and trolley cars until the 14th Street road bridge was complete.[38] On January 11, 1906, the first streetcars used the 14th Street Bridge southbound, while the northbound cars continued using the old bridge. Northbound streetcars switched on February 12, when the bridge was officially opened as the Highway Bridge. Vehicles continued to use the old bridge until the Highway Bridge was completed in December 1906, making the 1872 bridge obsolete. The bridge was closed on December 18, 1906 and demolition began on January 26, 1907.[39][40][41] On December 3, 1907 demolition was completed when markers were placed on the remaining underwater piles of riprap and piers.[42]
1904 Railroad Bridge (Long Bridge) (1904-Present)
Long Bridge (right) with the Metrorail bridge (center) and the Arland D. Williams Jr., Memorial Bridge (left) in 1992
In 1899, the Pennsylvania Railroad, owner of the Baltimore and Potomac Railroad (B&P) Company and thus the bridge, began to push Congress to authorize a replacement of the 1872 Long Bridge with one that would eliminate some of its well-documented problems. They wanted one high enough for sailing vessels to pass beneath, that could serve multiple carriers and end the problems caused by freshets. They also wanted a second bridge for non-rail traffic. The new bridge they proposed would enter the city on a viaduct and, with a tunnel under Virginia Avenue, eliminate all grade-crossings as well as connect to a new Union Station.[43] A February 12, 1901 act of Congress authorized the construction of the new double-track railroad bridge and an adjacent Highway Bridge.[44] The act also led to the creation of the McMillan Plan of 1902 and Union Station completed in 1907.[45] In April of that year the B&P submitted plans for the railroad bridge to the Secretary of War and the board of engineers overseeing the project which were approved later that year.[46][47]
Work on the new Railroad Bridge, a Pratt through-trussswing bridge, began in the spring of 1902, cost $750,000 and lasted more than 2 years.[48] The new bridge opened on August 28, 1904, about 150 feet (45 m) upriver from the old bridge.[49][50] The two-track bridge contained girders recycled from the PRR's Lower Trenton Bridge across the Delaware River and was painted a bright red.[50][51][52] It was 2,528.5 ft (770.7 m) long (about 450 ft (140 m) longer than the 1872 Bridge), consisted of eleven spans on twelve stone piers and sat 27 ft (8.2 m) above the water line. It created a wider channel, 100 ft (30 m) wide, on both sides of the pivot than the old bridge did.[49] In the early years, the bridge was often referred to as the "Railroad Bridge" to distinguish it from "Highway Bridge". It was also sometimes known as the "14th Street Railroad Bridge". It wasn't until the 1980s, during planning of the Virginia Railway Express (VRE) system, that the railroad bridge again began to be called by the old "Long Bridge" name. VRE began using the bridge in 1992.
In 1941 the Philadelphia, Baltimore and Washington Railroad, created in 1902 by a merger of the B&P and Philadelphia, Wilmington and Baltimore and thus the owner, began planning to reconstruct the bridge. They sought to build 11 new supplemental piers between the original truss spans and replacing the iron and steel truss spans with steel plate girders.[53] Work on bridge reconstruction began in mid-1942 and completed on November 9, 1943. It allowed heavily loaded trains to cross at 45 miles per hour (72 kilometres per hour), whereas before they were limited to 15 mph (24 km/h) for freight and 20 mph (32 km/h) for passenger trains.[54] The through-truss swing span was retained.
In 1955, the Commerce Department performed a study of Washington, DC area drawbridges and determined that the cost and inconvenience of maintaining the draw bridges was not worth the advantages of keeping the river navigable. The three bridges at 14th Street opened only 315 times in 1954 and cost $270,000 to operate and maintain, while also causing traffic tie-ups.[55] Later that year, the Army Corps of Engineers, decided that Potomac River bridges upstream of Hains Point would no longer require a lift or draw span and that once the Mason Bridge was completed, the existing draws would be sealed.[56] Construction of the Mason Bridge was completed in 1962 and the Long Bridge ceased opening except for a few exceptions. The last time it was opened was March 1969 to allow barges used in the removal of the old Highway Bridge to pass through. The tender's control house, or shanty, on top of the draw remained - often used as a billboard for Georgetown crew races until it was removed in late 1982 or early 1983.[57]
In 2011 the District Department of Transportation (DDOT), in coordination with the Federal Railroad Administration (FRA), began a High Speed Intercity Passenger Rail grant-funded comprehensive study for the rehabilitation or replacement of the Long Bridge. After a series of phased studies, the determined that the bridge had inadequate capacity and redundancy. The bridge was rehabilitated in 2016 and CSX determined that it was sufficient to meet their freight needs, but in 2019 DDOT and FRA reported that a second bridge was needed to serve increased passenger rail needs. A third bridge was also proposed to create a new bicycle/pedestrian crossing.[58]
On December 19, 2019, Virginia Governor Ralph Northam and rail company CSX Transportation announced a deal to expand rail service in Virginia. As part of the deal, Virginia will build a new two-track bridge parallel to the existing Long Bridge. The new bridge will be used for Amtrak and VRE trains, allowing the Long Bridge to be used solely for freight traffic. The Long Bridge has historically been one of the worst bottlenecks in the national rail system, often operating at 98 percent capacity.[59] The Final Environmental Impact Statement and FRA's Record of Decision was issued on September 4, 2020.[60][61] This approval clears the way for final engineering design, financing and construction of the Long Bridge expansion.
The now fully funded Long Bridge expansion is expected to be finished by 2030, and "all the money in the world will not get the Long Bridge done before 2030," according Donald “DJ” Stadtler Jr., executive director of the Virginia Passenger Rail Authority.[62]
The through-truss swing span of the 1904 Long Bridge in 2010
The 1904 Long Bridge (as modified in 1942) in 2013
Long Bridge, Washington DC, Aerial, Looking NE in 2022
Long Bridge, Washington DC, Aerial, Looking North in 2022
.jpg)
.jpg)
