This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.Find sources: "MICTOR" – news · newspapers · books · scholar · JSTOR (January 2013) (Learn how and when to remove this template message)

MICTOR is an acronym for Matched Impedance ConnecTOR, a product line of vertical board to board connectors. Produced by TE Connectivity, they are attached to printed circuit boards using surface-mount technology.[1] They can be used for probing boards.

MICTOR are used in HP and Tektronix logic analyzers.[2]

Connectors can be used even for very-high frequency applications, up to 100-ps rise time.[3]

Some of Mictor signals can be used for JTAG, e.g. in FPGA debugging variants of the connector.[4] Along with JTAG, Mictor connectors can also carry hardware trace signals like ARM CoreSight ETM (Embedded Trace Macrocell) or PTM (Program Trace Macrocell). [5]

Minimal variant of MICTOR consists of 38 signal positions; larger variants are designed up to 266 signals (with 38 increments). Connector is usually surface mounted.

References

  1. ^ TE Connectivity (TE) MICTOR Connectors, [1]
  2. ^ Jack G. Ganssle, The Art of Designing Embedded Systems, page 158
  3. ^ Microelectronics Packaging Handbook: Subsystem packaging, page III-439
  4. ^ Deep Memory Yields Effective In-System Debugging // XCell, 2002
  5. ^ Lauterbach's ARM Connector Specification p. 18
Categories