You do not have permission to edit this page, for the following reasons:

This IP address has been blocked from editing Wikipedia.
This does not affect your ability to read Wikipedia pages.
Most people who see this message have done nothing wrong. Some kinds of blocks restrict editing from specific service providers or telecom companies in response to recent abuse or vandalism, and can sometimes affect other users who are unrelated to that abuse. Review the information below for assistance if you do not believe that you have done anything wrong.

The IP address or range 44.201.0.0/16 has been blocked (disabled) by ‪ST47‬ for the following reason(s):

The IP address that you are currently using has been blocked because it is believed to be a web host provider. To prevent abuse, web hosts may be blocked from editing Wikipedia.
You will not be able to edit Wikipedia using a web host provider because it hides your IP address, much like a proxy or VPN.
We recommend that you attempt to use another connection to edit. For example, if you use a proxy or VPN to connect to the internet, turn it off when editing Wikipedia. If you edit using a mobile connection, try using a Wi-Fi connection, and vice versa. If you are using a corporate internet connection, switch to a different Wi-Fi network. If you have a Wikipedia account, please log in.
If you do not have any other way to edit Wikipedia, you will need to request an IP block exemption.

How to appeal if you are confident that your connection does not use a web host's IP address:
If you are confident that you are not using a web host, you may appeal this block by adding the following text on your talk page: ((unblock|reason=Caught by a web host block but this host or IP is not a web host. My IP address is _______. Place any further information here. ~~~~)). You must fill in the blank with your IP address for this block to be investigated. Your IP address can be determined here. Alternatively, if you wish to keep your IP address private you can use the unblock ticket request system. There are several reasons you might be editing using the IP address of a web host (such as if you are using VPN software or a business network); please use this method of appeal only if you think your IP address is in fact not a web host.

Administrators: The IP block exemption user right should only be applied to allow users to edit using web host in exceptional circumstances, and they should usually be directed to the functionaries team via email. If you intend to give the IPBE user right, a CheckUser needs to take a look at the account. This can be requested most easily at SPI Quick Checkuser Requests. Unblocking an IP or IP range with this template is highly discouraged without at least contacting the blocking administrator.

This block will expire on 23:54, 31 July 2024.

Even when blocked, you will usually still be able to edit your user talk page, as well as email administrators and other editors.

For information on how to proceed, please read the FAQ for blocked users and the guideline on block appeals. The guide to appealing blocks may also be helpful.

Other useful links: Blocking policy · Help:I have been blocked
Your IP address is in a range that has been blocked on all Wikimedia Foundation wikis. The block was made by ‪AntiCompositeNumber‬. The reason given is Open proxy/Webhost: Visit the FAQ if you are affected .
- Start of block: 13:55, 18 August 2022
- Expiry of block: 13:55, 18 April 2025
Your current IP address is 44.201.28.123. The blocked range is 44.201.0.0/16. Please include all above details in any queries you make. If you believe you were blocked by mistake, you can find additional information and instructions in the No open proxies global policy. Otherwise, to discuss the block please post a request for review on Meta-Wiki. You could also send an email to the stewards VRT queue at stewards@wikimedia.org including all above details.

You can view and copy the source of this page:

((Short description|Electromechanical transducer used in the playback of records))

((Refimprove|date=September 2014))

[[Image:At-f3.jpg|right|thumb|250px|An Audio Technica AT-F3 moving coil phono cartridge]]
A '''magnetic cartridge''', more commonly called a '''phonograph cartridge''' or '''phono cartridge''' or (colloquially) a '''pickup''', is an electromechanical [[transducer]] that is used to play [[gramophone record|records]] on a [[Phonograph|turntable]].

The cartridge contains a removable or permanently mounted [[phonograph#Stylus|stylus]], the tip - usually a gemstone, such as diamond or sapphire - of which makes physical contact with the record's groove. In popular usage and in [[disc jockey]] [[jargon]], the stylus, and sometimes the entire cartridge, is often called the needle. As the stylus tracks the serrated groove, it vibrates a cantilever on which is mounted a permanent magnet which moves between the magnetic fields of sets of electromagnetic coils in the cartridge (or vice versa: the coils are mounted on the cantilever, and the magnets are in the cartridge). The shifting magnetic fields generate an electrical current in the coils.  The electrical signal generated by the cartridge can be [[amplifier|amplified]] and then converted into [[sound]] by a [[loudspeaker]].<ref>((Cite web|title = Disc Recording Equalization Demystified by Gary Galo|url = https://audioxpress.com/news/disc-recording-equalization-demystified|website = audioxpress.com|access-date = 2023-01-15))</ref>

== History ==
The first commercially successful type of electrical phonograph pickup was introduced in 1925. Although electromagnetic, its resemblance to later magnetic cartridges is remote: it contained a bulky [[horseshoe magnet]] and employed the same imprecisely mass-produced single-use steel needles which had been standard since the first crude disc record players appeared in the 1890s. Its tracking weight was specified in ounces, not grams. This early type of magnetic pickup completely dominated the market well into the 1930s, but by the end of that decade it had been superseded by a comparatively lightweight [[piezoelectricity|piezoelectric]] crystal pickup type. The use of short-lived disposable metal needles remained standard. During the years of affluence and long-deferred consumer demand immediately following World War II, as old record players with very heavy pickups were replaced, precision-ground and conveniently long-lasting stylus tips made of sapphire or the exotic hard metal [[osmium]] were increasingly popular. However, records made for home use still played at 78&nbsp;rpm and most of them were still made of the same old abrasive shellac compound formulated to rapidly wear down the points of steel needles to fit the groove.

The introduction of the 33((fraction|1|3))&nbsp;rpm record [[LP record|LP]] "album" in 1948 and the 45&nbsp;rpm record "[[single (music)|single]]" in 1949 prompted consumers to upgrade to a new multi-speed record player with the required smaller-tipped "microgroove" stylus. Sapphire and diamond then became the standard stylus tip materials. At first, the new styli came installed in smaller, lighter piezoelectric crystal or ceramic cartridges of the general type found in inexpensive self-contained portable record players throughout the phonographic era. Ceramic cartridges continue to be used in most of the "retro" and compact record players currently being made, in part because they are comparatively robust and resistant to damage from careless handling, but mostly because they are inexpensive. However, during the 1950s, a new generation of small, lightweight, highly [[Stiffness#Compliance|compliant]] magnetic cartridges appeared and quickly found favor among high-fidelity enthusiasts because of their audibly superior performance. The high compliance also reduced record wear. They soon became standard in all but the cheapest component audio systems and are the most common type of pickup cartridge in use today.

== Design and construction ==
The cartridge consists of several components: the stylus, cantilever, magnets, coils and body. The stylus is the part that, when in use, is the interface with the record surface and tracks the modulations in the groove. It is typically made of a small polished diamond or other industrial gemstone. The cantilever supports the stylus, and transmits the vibrations from it to the coil/magnet assembly.<ref name=33audio>[http://www.33audio.com/enter/data/Linn.pdf "Product Data Sheet"]. Audiophile Systems Ltd. (c. 1997)</ref> The former is typically made of boron or aluminium, and previously beryllium although some manufacturers market models with exotic gemstone cantilevers.<ref>[http://www.originlive.com/dynavector/cartridges/dynavector-mc-mm-cartridge.html "Dynavector mc mm cartridges"]. Origin Live. ((webarchive |url=https://web.archive.org/web/20140831170616/http://www.originlive.com/dynavector/cartridges/dynavector-mc-mm-cartridge.html |date=2014-08-31 )) from the original on 16 September 2014</ref> Most models of moving magnet cartridges have detachable stylus–cantilever sub-assemblies that allow for their replacement without the need to remove and replace the entire cartridge when the stylus has become worn.<ref name=tnt-dv10x>[http://www.tnt-audio.com/sorgenti/dv10x4mk2_e.html "Dynavector DV-10x4 MKII"]. TNT Audio</ref>

Coupled to the tonearm, the cartridge body's function is to give the moving parts a stationary platform so that they can track the groove with precision.<ref name=33audio/>

== Types ==
In high-fidelity systems, crystal and ceramic pickups have been replaced by the magnetic cartridge, using either a moving magnet or a moving coil.

Compared to the crystal and ceramic pickups, the magnetic cartridge usually gives improved playback fidelity and reduced record wear by tracking the groove with lighter pressure. Magnetic cartridges use lower tracking forces and thus reduce the potential for groove damage. They also have a lower output voltage than a crystal or ceramic pickup, in the range of only a few millivolts, thus requiring greater amplification.

=== Moving Magnet (MM) and Moving Iron (MI) cartridges ===

In a moving magnet cartridge, the stylus cantilever carries a tiny permanent [[magnet]], which is positioned between two sets of fixed coils (in a stereophonic cartridge), forming a tiny electromagnetic generator. As the magnet vibrates in response to the stylus following the record groove, it [[electromagnetic induction|induces]] a tiny [[current (electricity)|current]] in the coils.

Because the magnet is small and has little mass, and is not coupled mechanically to the generator (as in a ceramic cartridge), a properly adjusted stylus follows the groove more faithfully while requiring less tracking force (the downward pressure on the stylus).

Moving iron and induced magnet types (ADC being a well-known example) have a moving piece of iron or other ferrous alloy  coupled to the cantilever (instead of a magnet), while a permanent, bigger magnet is over the coils, providing the necessary magnetic flux.

=== Moving Coil (MC) cartridges ===

[[File:Moving Coil Cartridge.jpg|Diagram of moving coil cartridge, showing essential parts|thumb]]
The MC design is again a tiny electromagnetic generator, but (unlike an MM design) with the magnet and coils reversed: the coils are attached to the cantilever, and move within the field of a permanent magnet. The coils are tiny and made from very fine wire.

Since the number of windings that can be supported in such an armature is small, the output voltage level is correspondingly small. The resulting signal is only a few hundred microvolts, and thus more easily swamped by noise, induced hum, etc. Thus it is more challenging to design a [[preamplifier]] with the extremely low noise inputs needed for moving-coil cartridge, therefore a "step up transformer" is sometimes used instead.

However, there are available many "high output" moving coil cartridges that have output levels similar to MM cartridges.<ref name=tnt-dv10x/>

Moving coil cartridges are extremely small precision instruments and are therefore generally expensive, but are frequently preferred by audiophiles due to a subjectively better performance.

=== Moving Micro Cross (MMC) cartridges ===

The MMC design was invented and patented by [[Bang & Olufsen]]. The MMC cartridge is a variation of the Moving Iron (MI) design. Magnets and coils are stationary while a ''micro cross'' moves with the stylus, thereby varying the distances between the arms of the cross and the magnets. It is claimed that the MMC design allows for superior channel separation((Citation needed|date=April 2022)), since each channel's movements appear on a separate axis.

=== Moving Magnet vs. Moving Coil ===

Moving magnet cartridges are more commonly found at the 'lower-end' of the market, while the 'higher-end' tends to be dominated by moving coil designs. The debate as to whether MM or MC designs can ultimately produce the better sound is often heated and subjective. The distinction between the two is often blurred by cost and design considerations - e.g. can an MC cartridge requiring another step-up amplification outperform well made MM cartridges that need simpler front-end stages?

* MC cartridges offer very low inductance and impedance, which means that the effects of capacitance (in the cable that goes from the cartridge to the preamp) are negligible, unlike MM cartridges, which comparatively sport very high inductance and impedance. In the latter, cable capacitance can negatively affect the flatness of [[frequency response]] and linearity of phase response. This would account for a potential sonic advantage to MC types.
* It is generally believed that MC cartridges sport lower moving masses. However, quality MM cartridges are able to offer as low or lower moving mass than some MC cartridges. For example, the state-of-the-art Technics EPC-100CMK4 with 0.055&nbsp;mg of effective tip mass, of moving magnet design. Comparatively, the popular Denon DL-301 moving coil cartridge has an effective tip mass of 0.270&nbsp;mg.
* To discriminate cartridges by engine (MC vs MM) overlooks the fact that the stylus tip shape (conical vs elliptical vs advanced shapes), mounting (bonded vs nude), cantilever material (aluminum vs boron vs beryllium) and cantilever design (solid rod vs rolled tube) have a significant influence in the sound, and this may account for more variation of sound quality than the engine type used.

MM cartridges generally have output of 3-6&nbsp;mV, compatible with the MM inputs of preamplifiers.  MC cartridges come in two varieties, low output
(usually < 1.0&nbsp;mV) and high output (more than 1.5&nbsp;mV); there are also some with very low output (0.3&nbsp;mV or less).  High output MC cartridges are a
concession to compatibility with older preamp MM inputs; low output MC cartridges may generate excessive noise or have insufficient preamp gain to drive amplifiers to their rated output if used on MM inputs.  Most solid state preamplifiers have separate high gain, low noise MC inputs to accommodate these.  Cartridges with very low output need a separate pre-phono amplification stage before input to an MC or MM preamplifier stage.

=== "London Decca" Cartridges ===

The [[Decca Records#Decca Special Products|Decca]] phono cartridges were a unique design, with fixed magnets and coils. The stylus shaft was composed of the diamond tip, a short piece of soft iron, and an L-shaped [[cantilever]] made of non-magnetic steel. Since the iron was placed very close to the tip (within 1&nbsp;mm), the motions of the tip could be tracked very accurately. Decca engineers called this "positive scanning". Vertical and lateral compliance was controlled by the shape and thickness of the cantilever. Decca cartridges had a reputation for being very musical; however early versions required more tracking force than competitive designs - making record wear a concern.

== References ==
((Reflist))

==External links==
*[http://www.enjoythemusic.com/cartridgehistory.htm Cartridge history] from a 1958 book
*[https://www.leson.org/understand-phono-cartridges-reference-paper/ Understand Phono Cartridges] from a 1979 article

[[Category:Sensors]]
[[Category:Electromagnetic components]]
[[Category:Turntables]]
[[Category:Audio transducers]]

Pages transcluded onto the current version of this page (help):

Magnetic cartridge (edit)
Template:Ambox (view source) (template editor protected)
Template:Category handler (view source) (protected)
Template:Citation needed (view source) (protected)
Template:Cite web (view source) (protected)
Template:Delink (view source) (protected)
Template:Find sources mainspace (view source) (template editor protected)
Template:Fix (view source) (protected)
Template:Fix/category (view source) (protected)
Template:Fraction (view source) (template editor protected)
Template:Fraction/styles.css (view source) (template editor protected)
Template:Main other (view source) (protected)
Template:More citations needed (view source) (template editor protected)
Template:Pagetype (view source) (protected)
Template:Refimprove (view source) (template editor protected)
Template:Reflist (view source) (protected)
Template:Reflist/styles.css (view source) (protected)
Template:SDcat (view source) (protected)
Template:Short description (view source) (protected)
Template:Short description/lowercasecheck (view source) (protected)
Template:Webarchive (view source) (template editor protected)
Module:Arguments (view source) (protected)
Module:Category handler (view source) (protected)
Module:Category handler/blacklist (view source) (protected)
Module:Category handler/config (view source) (protected)
Module:Category handler/data (view source) (protected)
Module:Category handler/shared (view source) (protected)
Module:Check for unknown parameters (view source) (protected)
Module:Citation/CS1 (view source) (protected)
Module:Citation/CS1/COinS (view source) (protected)
Module:Citation/CS1/Configuration (view source) (protected)
Module:Citation/CS1/Date validation (view source) (protected)
Module:Citation/CS1/Identifiers (view source) (protected)
Module:Citation/CS1/Utilities (view source) (protected)
Module:Citation/CS1/Whitelist (view source) (protected)
Module:Citation/CS1/styles.css (view source) (protected)
Module:Delink (view source) (protected)
Module:Disambiguation/templates (view source) (protected)
Module:Find sources (view source) (template editor protected)
Module:Find sources/config (view source) (template editor protected)
Module:Find sources/links (view source) (template editor protected)
Module:Find sources/templates/Find sources mainspace (view source) (template editor protected)
Module:Message box (view source) (protected)
Module:Message box/ambox.css (view source) (protected)
Module:Message box/configuration (view source) (protected)
Module:Namespace detect/config (view source) (protected)
Module:Namespace detect/data (view source) (protected)
Module:Pagetype (view source) (protected)
Module:Pagetype/config (view source) (protected)
Module:Pagetype/disambiguation (view source) (protected)
Module:Pagetype/setindex (view source) (protected)
Module:Pagetype/softredirect (view source) (protected)
Module:SDcat (view source) (protected)
Module:String (view source) (protected)
Module:Unsubst (view source) (protected)
Module:Webarchive (view source) (template editor protected)
Module:Webarchive/data (view source) (template editor protected)
Module:Wikitext Parsing (view source) (protected)
Module:Yesno (view source) (protected)

Return to Magnetic cartridge.

Retrieved from "https://en.wikipedia.org/wiki/Magnetic_cartridge"