The Malaysian Expressway System (Malay: Sistem Lebuh Raya Ekspres Malaysia) is a network of national controlled-access expressways in Malaysia that forms the primary backbone network of Malaysian national highways. The network begins with the Tanjung Malim–Slim River tolled road (Federal Route 1) which was opened to traffic on 16 March 1966,[2] later North–South Expressway (NSE), and is being substantially developed. Malaysian expressways are built by private companies under the supervision of the government highway authority, Malaysian Highway Authority (abbreviated as MHA; also referred to as Lembaga Lebuhraya Malaysia (LLM) in Malay).[1]
Overview
The expressway network of Malaysia is considered as one of the best controlled-access expressway network in Asia and in the world after Japan and South Korea.[4] There are 30 expressways in the country and the total length is 748 kilometres (465 mi).[3][5] and another 219.3 kilometres (136.3 mi) is under construction. The closed toll expressway system is similar to the Japanese Expressway System and Chinese Expressway System. All Malaysian toll expressways are controlled-access highway and managed in the Build-Operate-Transfer (BOT) system.
Asian Highway route shield.Expressway distance sign with Asian Highway route shield.
A few major expressways in Malaysia are part of the larger Asian Highway Network. The Asian Highway Network is an international project between Asian nations to develop their highway systems, which will form main routes in the network. Seven Asian Highway routes pass through Malaysia:[6][7]
The status of the route alignment of the Asian Highway 2 crossing the Malaysia–Singapore border is in dispute. Malaysia had commissioned the Second Link Expressway E3 as part of AH2 to maintain the primary access-controlled highway status of the route.[6] Meanwhile, Singapore had commissioned the Johor–Singapore Causeway and the Bukit Timah Expressway as part of AH2, as the Johor–Singapore Causeway is the main gateway to Singapore from Malaysia,[9] which could mean that the Skudai Highway would be included in the route alignment instead of the Second Link Expressway.
The completion of Johor Bahru Eastern Dispersal Link Expressway (EDL) in 2012, the Asian Highway AH2 route were re-routed to Eastern Dispersal Link Expressway (EDL) from Second Link Expressway. Second Link Expressway were gazetted as a part of Asian Highway AH143.
Before tolled expressways were introduced in the mid-1970s, most Malaysians travelled around Peninsula Malaysia on federal roads.
The major reasons for building new expressways in Malaysia are the increasing number of vehicles along federal routes, the opening of major ports and airports in Malaysia, and the increasing population in major cities and towns of Malaysia.
In 1966, the Highway Planning Unit was established under the Ministry of Works and Communications.
The first tolled highway in Malaysia was the 20-kilometre-length (12 mi) Tanjung Malim–Slim River tolled road (Federal Route 1) which was opened to traffic on 16 March 1966. It saved journey time by half an hour, and cars were charged 50 sen, buses and lorries RM1 and motorcycles 20 sen. However, in 1994, with the completion of the North–South Expressway, the toll plaza was removed and it became a toll-free highway.
In 1970, the first comprehensive five-year road development programme was formulated by the Highway Planning Unit, which included expanding rural roads and plans to construct three new highways linking the east and west coasts.
On 27 March 1974, the Kuala Lumpur–Seremban Expressway was constructed. Funded by a loan by the World Bank, the 63.4-kilometre (39.4 mi) expressway was constructed in three phases; the first phase was from Kuala Lumpur to Nilai, while the second phase was from Nilai to Seremban. The third phase was the rehabilitation of the old Federal Route 1 from Kuala Lumpur to Seremban as a toll-free alternative to motorists. The completion of the Kuala Lumpur–Seremban Expressway in June 1977 marking the first step towards the construction of the new interstate expressway known as North–South Expressway (NSE).
The Kuala Lumpur–Karak Highway (Federal Route 2) was built between 1976 and 1979. Meanwhile, the 900-metre-long (3,000 ft) Genting Sempah Tunnel was the first highway tunnel in Malaysia, constructed between 1977 and 1979. The tunnel was opened in 1979 by the then Minister of Works and Communications, Dato' Abdul Ghani Gilong.[10]
The first sections of the North–South Expressway were the toll sections of the Kuala Lumpur–Seremban Expressway from Sungai Besi to Labu toll plazas, which was opened on 16 June 1982. The next sections were Bukit Kayu Hitam–Jitra and Senai–Johor Bahru stretches opened in 1985. Then the Ipoh–Changkat Jering and Seremban–Ayer Keroh stretches, which were opened to traffic in 1986. However, on 1 October 1987 the closed-toll system came into force along the Kuala Lumpur–Ayer Keroh and Ipoh–Changkat Jering stretches. The Ayer Keroh–Pagoh stretch on the North–South Expressway was opened to traffic in 1988. All sections of the North–South Expressway were completed and officially opened on 8 September 1994 by the former Prime Minister of Malaysia, Tun Dr Mahathir Mohamad.
The Phase 2 of the East Coast Expressway (Terengganu) linking Jabur and Kuala Terengganu was completed on 31 January 2015, thus completing the alignment of the East Coast Expressway from Kuala Lumpur to Kuala Terengganu.
The new project in the west coast of Peninsula Malaysia, West Coast Expressway (WCE) has been unveiled by the government. Construction of the 233-kilometre-long (145 mi) expressway linking Banting, Selangor and Taiping, Perak was to start in 2015.
Greater Kuala Lumpur and Klang Valley
The Damansara Link section of Klang Valley's Sprint Expressway near Semantan.New Pantai Expressway near Subang Jaya.
The history of the highways in the Klang Valley started after the expulsion of Singapore from Malaysia on 9 August 1965, when the Malaysian government decided to make Port Swettenham (now Port Klang) Malaysia's new national port as a replacement for Singapore. As a result, the government planned to build a first highway in Klang Valley known as Federal Highway connecting Port Swettenham (now Port Klang) to Kuala Lumpur in the 1960s.
In 1967, the 45-kilometre (28 mi) Federal Highway (Federal Route 2), the first dual-carriageway highway in Malaysia was opened to traffic.
In the early 1990s the federal government decided to build more expressways and highways in Klang Valley because of the increasing size and population of the Klang Valley conurbation, development of new townships and industrial estates, and the massive traffic jams along Federal Highway.
The main reasons for constructing new expressways in Penang are the increasing populations in George Town and Butterworth, and the need for more cross-strait linkages. Prior to the construction of the Penang Bridge, the only way to cross the Penang Strait between Penang Island and the mainland was via ferries. In addition, major industrial estates, such as in Bayan Lepas on the island and Perai on the mainland, were opened, leading to the growth of residential townships like Bayan Baru and Seberang Jaya.[12] These necessitated the construction of more bridges and expressways in the state.
The history of highways in Johor Bahru started in the 1980s when the city of Johor Bahru became a main southern international gateway to Malaysia from Singapore after the separation of Singapore from Malaysia on 9 August 1965.
The main reasons for building expressways in Johor Bahru are the increasing size of the Johor Bahru metropolitan area since it achieved city status on 1 January 1994, and the formation of the South Johor Economic Region (SJER) or Iskandar Development Region (IDR) (now Iskandar Malaysia) on 30 July 2006. Many townships have been constructed around Johor Bahru and industrial estates have been developed in areas such as Senai, Skudai, Tebrau, Pasir Gudang and Tampoi.
The first highway in Johor Bahru was Skudai Highway linking Senai to Johor Causeway, which was completed in 1985 and it was the first toll highway in Johor Bahru. However the toll plaza near Senai was abolished in 2004. Kempas Highway, the only state road in Malaysia constructed as a 2-lane highway was completed in 1994. The Malaysia–Singapore Second Crossing, which is the second link to Singapore after Johor Causeway, was opened to traffic on 18 April 1998.
Tun Salahuddin Bridge, the only tolled expressway in East Malaysia. In the background is Kuching City Centre
The history of highways in East Malaysia started in the 1960s when the federal government decided to build the Pan Borneo Highway, linking Sarawak and Sabah state.
The Pan Borneo Highway project is a joint project between the governments of Brunei and Malaysia. The project started as soon as Sarawak and Sabah joined the federation of Malaysia in 1963. The lack of a road network system in Sarawak was the main factor of the construction.
There are one toll expressway, one toll federal highway and one toll state highway in Sarawak – the Tun Salahuddin Bridge in Kuching city, the Miri–Baram Highway in Miri Division, and the Lanang Bridge in Sibu. The Tun Salahuddin Bridge is the first only toll expressway in East Malaysia. However, the toll collection of both Lanang Bridge and Tun Salahuddin Bridge were abolished in 2015 and 2016 by the Sarawak state government.
On 31 March 2015, the dual carriageway toll free Pan Borneo Expressway in Sarawak was unveiled by the Federal Government. The highway project will be implemented with Lebuhraya Borneo Utara Sdn Bhd (LBU) as the Project Delivery Partner (PDP) managing and supervising its construction.
Features
Expressway standards
Malaysian expressway exit signs
The construction, standards, management and usage of expressways in Malaysia are subject to Federal Roads Act (Private Management) 1984. In Malaysia, expressways are defined as high-speed routes with at least four lanes (two in each direction) and should have full access control or partial access control. Most expressways in Malaysia are controlled-access expressways.
Expressways are defined as high-speed highways built under the JKR R6 rural highway standard, as dual-carriageways of at least 4 lanes (2 lanes per carriageway) with full access control, grade-separated interchanges and high design speed limit of 120 kilometres per hour (75 mph), allowing the maximum speed limit of 110 kilometres per hour (68 mph).[13] However, the section between Cahaya Baru and Penawar of the Senai–Desaru Expressway E22 is built as a two-lane single carriageway with the similar features as the Swiss autostrasse, making it as the first true two-lane controlled-access expressway in Malaysia followed by the section of Teluk Panglima Garang and Pulau Indah of the South Klang Valley Expressway (SKVE) E26[14] All expressways are considered federal highways, but administered by Malaysian Highway Authority (MHA) and the respective concessionaire companies.
Highways, on the other hand, complement the national network of expressways and federal roads and built under the JKR R5 rural highway standard, with relatively high design speed limit (although not as high as the expressway speed limit) of 100 kilometres per hour (62 mph), allowing the maximum speed limit of 90 kilometres per hour (56 mph).[13] The highways are built with partial access control, and grade-separated interchanges and at-grade crossings are both permitted. However, it is possible for a federal or state highway to be built with almost equivalent standard of an expressway with the exception of lower speed limit, for example the Federal Highway. Highways can be built either as dual-carriageway or two-lane single carriageway.
Before the mid-1990s, there were no specific coding system for the expressways. When more and more expressways were built, a system of expressway numbering was applied to all expressways. Expressways are labelled with the letter "E" followed by assigned numbers, for example the code for North–South Expressway southern route is E2. The expressways have green signs and the text colour is white.
However, there are some exceptions in some highways. Some highways like Federal Highway (Federal Route 2) and Skudai Highway (Federal Route 1) retain their federal route codes. In addition, there are some highways in Malaysia which are classified as municipal roads such as Kuala Lumpur Middle Ring Road 1.
The highway exit numbers use the format "xxnn", where "xx" is the expressway code number (which can be one or two digits) and "nn" is the two-digit assigned number for each highway exit. For example, Johor Bahru exit at the end of North–South Expressway is labelled exit 257, where the last two digits (57) are the assigned exit number and the first digit (2) is the expressway route number (E2). Meanwhile, Jalan Templer exit at the Federal Highway is labelled exit 224, where the two digits (24) are the assigned exit number and the first digit (2) is the federal route number (2). Expressways have distance markers in green colour (blue for federal expressways and highways) placed every 100 metres (330 ft; 110 yd).
Malaysian expressway code logo with highway concessionaries logo and SOS hotline
Expressway monitoring and maintenance
Monitoring
Since 1986, Malaysian expressways have been built by private companies under the supervision of the government highway authority, Lembaga Lebuhraya Malaysia (Malaysian Highway Authority). Every private concession company, such as PLUS Expressways, ANIH Berhad(formerly MTD Prime) and the others have monitored and maintained their expressways.
Projek Penyelenggaraan Lebuhraya Berhad (PROPEL) has undertaken repair and maintenance works on highway facilities, such as road works and repair works, road line painting, cleaning works on laybys and rest and service areas, trimming grass and landscaping along expressway areas, installing road furniture, and others. Meanwhile, the PROPEL Response Team Unit is a special response team unit.
Every expressway and highway in Malaysia has a toll system, which is either a closed toll system or open toll system. All transactions are in Malaysian Ringgit (RM)
Open system
Users only have to pay at certain toll plazas within the open system range for a fixed amount.
Closed system
Users collect toll tickets or touch in with their Touch 'n Go card North South Expressway issues the PLUSTransit cards and other closed toll expressways such as East Coast Expressway and South Klang Valley Expressway issues the transit card) before entering the expressway at respective toll plazas and pay an amount of toll or touch out with your same touch n go card at the exit toll plaza plus the distance from the plaza to the Limit of Maintenance Responsibility (LMR). The toll rate in this system is based on the distance traveled.
✔Toll fare will be deducted from eWallet balance via PayDirect
✔
XPayDirect not activated
✔
•VEP enforcement deferred until further notice
•will be extended to open and closed system nationwide after fully launch
Bank Card (Debit/Credit)
✔under pilot test on open system
Notes
Nationwide toll collection on open and closed system For PayDirect, if your eWallet are insufficient, your toll fares will be deducted from your Touch 'n Go Card balance.
RFID tag issuance by Touch 'n Go for Malaysian registered vehicle.
The Multi Lane Free Flow (MLFF) is an electronic toll collection system that allows free flow high speed toll system highway for all its users. With MLFF, the current toll lanes at toll plazas will be replaced with readers at gantry across the highway to detect vehicle and deduct toll using the existing ETC when fully implemented. The Malaysian Highway Authority (MHA) is planning to implement MLFF system at all highways in stages starting 2010.
Toll rebate
Beginning 1 September 2009, the 20 per cent rebate given to motorists who pay toll charges more than 80 times a month, can be saved for up to six months. The rebate can be redeemed at 126 locations which would be announced in due time.
Toll rate classes
Malaysian expressway toll rate list signboard
There are fixed toll rate classes for every Malaysian expressway except for the Penang Bridge and the SMART Tunnel where toll rates are not the same.
There are several controversial issues regarding the construction of expressways. The main issue is the increase of toll rates, which can be a huge burden especially for residents of Kuala Lumpur and the surrounding Klang Valley conurbation.[15]
There are also various parties who question the capability of the numerous expressways in Klang Valley to overcome traffic congestion, which does not show signs of improvement with the construction of new expressways. Three chief factors were blamed for the urban expressway congestion, namely the short-sighted policies by the authorities, greedy property developers, and the failure of local municipal councils to control the development in the Klang Valley.[16]
The flyover which collapsed on Setia Alam Interchange in New Klang Valley Expressway during construction on 10 July 2005, where about 4 people died.
The 8 fallen I-beams at the Pajam Interchange in Negeri Sembilan during the construction of the Kajang–Seremban Highway (LEKAS Highway) on the night of 27 September 2007.
The ramp collapse at the Batu Maung Interchange at Batu Maung side of the Penang Second Bridge during construction on 6 June 2013 killing one person.
,_NSE_20230529_165827.jpg)
.jpg)
.jpg)
