Mechanical resonance is the tendency of a mechanical system to respond at greater amplitude when the frequency of its oscillations matches the system's natural frequency of vibration (its resonance frequency or resonant frequency) closer than it does other frequencies. It may cause violent swaying motions and potentially catastrophic failure in improperly constructed structures including bridges, buildings and airplanes. This is a phenomenon known as resonance disaster.

Avoiding resonance disasters is a major concern in every building, tower and bridge construction project. The Taipei 101 building for instance relies on a 660-ton pendulum—a tuned mass damper—to modify the response at resonance. The structure is also designed to resonate at a frequency which does not typically occur. Buildings in seismic zones are often constructed to take into account the oscillating frequencies of expected ground motion. Engineers designing objects that have engines must ensure that the mechanical resonant frequencies of the component parts do not match driving vibrational frequencies of the motors or other strongly oscillating parts.

Many resonant objects have more than one resonance frequency. Such objects will vibrate easily at those frequencies, and less so at other frequencies. Many clocks keep time by mechanical resonance in a balance wheel, pendulum, or quartz crystal.

Description

The natural frequency of the very simple mechanical system consisting of a weight suspended by a spring is:

${\displaystyle f={1 \over 2\pi }{\sqrt {k \over m))}$

where m is the mass and k is the spring constant. For a given mass, stiffening the system (increasing ${\displaystyle k}$) increases its natural frequency, which is a general characteristic of vibrating mechanical systems.

A swing set is another simple example of a resonant system with which most people have practical experience. It is a form of pendulum. If the system is excited (pushed) with a period between pushes equal to the inverse of the pendulum's natural frequency, the swing will swing higher and higher, but if excited at a different frequency, it will be difficult to move. The resonance frequency of a pendulum, the only frequency at which it will vibrate, is given approximately, for small displacements, by the equation:[1]

${\displaystyle f={1 \over 2\pi }{\sqrt {g \over L))}$

where g is the acceleration due to gravity (about 9.8 m/s2 near the surface of Earth), and L is the length from the pivot point to the center of mass. (An elliptic integral yields a description for any displacement). Note that, in this approximation, the frequency does not depend on mass.

Mechanical resonators work by transferring energy repeatedly from kinetic to potential form and back again. In the pendulum, for example, all the energy is stored as gravitational energy (a form of potential energy) when the bob is instantaneously motionless at the top of its swing. This energy is proportional to both the mass of the bob and its height above the lowest point. As the bob descends and picks up speed, its potential energy is gradually converted to kinetic energy (energy of movement), which is proportional to the bob's mass and to the square of its speed. When the bob is at the bottom of its travel, it has maximum kinetic energy and minimum potential energy. The same process then happens in reverse as the bob climbs towards the top of its swing.

Some resonant objects have more than one resonance frequency, particularly at harmonics (multiples) of the strongest resonance. It will vibrate easily at those frequencies, and less so at other frequencies. It will "pick out" its resonance frequency from a complex excitation, such as an impulse or a wideband noise excitation. In effect, it is filtering out all frequencies other than its resonance. In the example above, the swing cannot easily be excited by harmonic frequencies, but can be excited by subharmonics, such as pushing the swing every second or third oscillation.

Examples

Various examples of mechanical resonance include:

Resonance may cause violent swaying motions in constructed structures, such as bridges and buildings. The London Millennium Footbridge (nicknamed the Wobbly Bridge) exhibited this problem. A faulty bridge can even be destroyed by its resonance (see Broughton Suspension Bridge and Angers Bridge). Mechanical systems store potential energy in different forms. For example, a spring/mass system stores energy as tension in the spring, which is ultimately stored as the energy of bonds between atoms.

Resonance disaster

In mechanics and construction a resonance disaster describes the destruction of a building or a technical mechanism by induced vibrations at a system's resonant frequency, which causes it to oscillate. Periodic excitation optimally transfers to the system the energy of the vibration and stores it there. Because of this repeated storage and additional energy input the system swings ever more strongly, until its load limit is exceeded.

Tacoma Narrows Bridge

The dramatic, rhythmic twisting that resulted in the 1940 collapse of "Galloping Gertie", the original Tacoma Narrows Bridge, is sometimes characterized in physics textbooks as a classic example of resonance. The catastrophic vibrations that destroyed the bridge were due to an oscillation caused by interactions between the bridge and the winds passing through its structure—a phenomenon known as aeroelastic flutter. Robert H. Scanlan, father of the field of bridge aerodynamics, wrote an article about this.[2]

Applications

Various method of inducing mechanical resonance in a medium exist. Mechanical waves can be generated in a medium by subjecting an electromechanical element to an alternating electric field having a frequency which induces mechanical resonance and is below any electrical resonance frequency.[3] Such devices can apply mechanical energy from an external source to an element to mechanically stress the element or apply mechanical energy produced by the element to an external load.

The United States Patent Office classifies devices that tests mechanical resonance under subclass 579, resonance, frequency, or amplitude study, of Class 73, Measuring and testing. This subclass is itself indented under subclass 570, Vibration.[4] Such devices test an article or mechanism by subjecting it to a vibratory force for determining qualities, characteristics, or conditions thereof, or sensing, studying or making analysis of the vibrations otherwise generated in or existing in the article or mechanism. Devices include right methods to cause vibrations at a natural mechanical resonance and measure the frequency and/or amplitude the resonance made. Various devices study the amplitude response over a frequency range is made. This includes nodal points, wave lengths, and standing wave characteristics measured under predetermined vibration conditions.