Methanesulfonic acid

Names
Preferred IUPAC name Methanesulfonic acid
Other names Methylsulfonic acid, MSA; Mesylic acid
Identifiers
CAS Number	75-75-2 Y
3D model (JSmol)	Interactive image
Beilstein Reference	1446024
ChEBI	CHEBI:27376 Y
ChemSpider	6155 Y
ECHA InfoCard	100.000.817
EC Number	200-898-6
Gmelin Reference	1681
PubChem CID	6395
UNII	12EH9M7279 Y
UN number	2585
CompTox Dashboard (EPA)	DTXSID4026422
InChI InChI=1S/CH4O3S/c1-5(2,3)4/h1H3,(H,2,3,4) Y Key: AFVFQIVMOAPDHO-UHFFFAOYSA-N Y InChI=1/CH4O3S/c1-5(2,3)4/h1H3,(H,2,3,4)/f/h2H InChI=1/CH4O3S/c1-5(2,3)4/h1H3,(H,2,3,4) Key: AFVFQIVMOAPDHO-UHFFFAOYAS
SMILES O=S(=O)(O)C
Properties
Chemical formula	CH4O3S
Molar mass	96.10 g·mol−1
Appearance	Clear, colourless liquid
Density	1.48 g/cm3
Melting point	17 to 19 °C (63 to 66 °F; 290 to 292 K)
Boiling point	167 °C (333 °F; 440 K) at 10 mmHg, 122 °C/1 mmHg
Solubility in water	miscible
Solubility	Miscible with methanol, diethyl ether. Immiscible with hexane
log P	−2.424[1]
Acidity (pKa)	−1.9[2]
Hazards
GHS labelling:
Pictograms
Signal word	Danger
Hazard statements	H314
Precautionary statements	P260, P264, P280, P301+P330+P331, P303+P361+P353, P304+P340, P305+P351+P338, P310, P321, P363, P405, P501
Safety data sheet (SDS)	Oxford MSDS
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). Y verify (what is YN ?) Infobox references

Methanesulfonic acid (MsOH) or methanesulphonic acid (in British English) is an organosulfuric, colorless liquid with the molecular formula CH₃SO₃H and structure H₃C−S(=O)₂−OH. It is the simplest of the alkylsulfonic acids (R−S(=O)₂−OH). Salts and esters of methanesulfonic acid are known as mesylates (or methanesulfonates, as in ethyl methanesulfonate). It is hygroscopic in its concentrated form. Methanesulfonic acid can dissolve a wide range of metal salts, many of them in significantly higher concentrations than in hydrochloric acid (HCl) or sulfuric acid (H₂SO₄).^[3]

History and manufacturing

The first commercial production of MSA, developed in the 1940s by Standard Oil of Indiana, was based on oxidation of methylsulfide by O
₂ from air. Although inexpensive, this process suffered from a poor product quality and explosion hazards.

In 1967, the Pennwalt Corporation (USA) developed a different process for methylsulfide (as an water-based emulsion) oxidation using chlorine, followed by extraction-purification. In 2022 this chlorine-oxidation process was used only by Arkema (France) for making high-purity MSA. This process is not popular on a large scale, because it co-produces large quantities of hydrochloric acid.

Between years 1970 and 2000 MSA was used only on a relatively small-scale in niche markets (for example, in the microelectronic and electroplating industries since the 1980s), which was mainly due to its rather high price and limited availability. However, this situation changed around 2003, when BASF launched commercial production of MSA in Ludwigshafen based on a modified version of the aforementioned air oxidation process, using dimethyldisulfide instead of methylsulfide. The former is produced in one step from methanol from syngas, hydrogen and sulfur.

An even better (lower-cost and environmentally friendlier) process of making methanesulfonic acid was developed in 2016 by Grillo-Werke AG (Germany). It is based on a direct reaction between methane and oleum at around 50 °C and 100 bar in the presence of a potassium persulfate initiator. ^[4] This technology was acquired and commercialized by BASF in 2019.^[5]

Applications

Since ca. 2000 methanesulfonic acid has become a popular replacement for other acids in numerous industrial and laboratory applications, because it:

• is a strong acid,
• has a low vapor pressure (see boiling points in the "Properties" inset),
• is not an oxidant or explosive, like nitric, sulfuric or perchloric acids.
• is a liquid at room temperature,
• is soluble in many organic solvents,
• forms water-soluble salts with all inorganic cations and with most organic cations,
• does not form complexes with metal ions in water,
• its anion, mesylate, is non-toxic and suitable for pharmaceutical preparations.

The closely related p-toluenesulfonic acid (PTSA) is solid.

Methanesulfonic acid can be used in the generation of borane (BH₃) by reacting methanesulfonic acid with NaBH₄ in an aprotic solvent such as THF or DMSO, the complex of BH₃ and the solvent is formed.^[6]

Electroplating

Solutions of methanesulfonic acid are used for the electroplating of tin and tin-lead solders. It is displacing the use of fluoroboric acid, which releases corrosive and volatile hydrogen fluoride.^[7]

Methanesulfonic acid is also a primary ingredient in rust and scale removers.^[8] It is used to clean off surface rust from ceramic, tiles and porcelain which are usually susceptible to acid attack.