Mitsubishi Heavy Industries Crystal Mover C810A
A C810A train, January 2020
Interior Design of C810A
In service	5 April 2016; 7 years ago (2016-04-05) – Present
Manufacturer	Mitsubishi Heavy Industries
Built at	Mihara, Hiroshima, Japan
Family name	Crystal Mover
Constructed	2012 – 2016
Entered service	5 April 2016; 7 years ago (2016-04-05)
Number built	16 vehicles
Number in service	16 vehicles
Formation	Single vehicles (M) that can be coupled to form 2-car trains
Fleet numbers	42 – 57
Capacity	14 seated; 91 standing
Operators	SBS Transit Ltd (ComfortDelGro Corporation)
Depots	Sengkang
Lines served	SKLRT  Sengkang LRT line  PGLRT  Punggol LRT line
Specifications
Car body construction	Aluminum-alloy weighed
Car length	11.84 m (38 ft 10+1⁄8 in)
Width	2.69 m (8 ft 9+7⁄8 in)
Height	3,615 mm (11 ft 10+3⁄8 in)
Doors	2 × 2 per car
Maximum speed	80 km/h (50 mph) (design) 70 km/h (43 mph) (service)
Weight	14.9 t (14.7 long tons; 16.4 short tons) per car
Traction system	Mitsubishi IGBT–VVVF inverter vector control
Traction motors	2 × 80 kW (110 hp) 3-phase AC induction motor
Power output	160 kW (210 hp)
Acceleration	1 m/s2 (3.3 ft/s2)
Deceleration	1 m/s2 (3.3 ft/s2) (service) 1.3 m/s2 (4.3 ft/s2) (emergency)
Electric system(s)	750 V DC third rail
Current collector(s)	Collector shoe
AAR wheel arrangement	A-A
Braking system(s)	Electric command pneumatic brake with regenerative brake with stand-by brake, parking brake (with variable load control and wheel slide prevention control)
Safety system(s)	Kyosan APM fixed block ATC under ATO GoA 4 (UTO), with subsystems of ATP, ATS and CBI[1]
Coupling system	BSI
Multiple working	Within type With C810
Track gauge	1,850 mm (6 ft 27⁄32 in) Guideway span: 3.2 m (10 ft 6 in)

The Mitsubishi Heavy Industries Crystal Mover C810A is an automated people mover vehicle which serves the Sengkang LRT line and Punggol LRT line as the second generation train after their previous counterparts Mitsubishi Heavy Industries Crystal Mover C810. Two train sets commenced revenue service on 5 April 2016, with Set 43 and 44 running on the East and West loop of the Sengkang LRT line respectively. Since then, the rest of the fleet progressively entered service.

Train design

There is little difference between its older counterpart, the C810. However, its headlights are vertical instead of horizontal and luminously white instead of yellow installed on its predecessor. Its train number is underlined.^[2]

Its interior design bear little difference compared to its older counterparts, one being that the LCD screen font is smaller and shows green messages (e.g.: Welcome to SBS Transit) instead of yellow-green in its older counterparts.

As the carriages are closed-end, the train must be stationary and the doors must be open for passengers to move between carriages during 2-car operations.

Train formation

The configuration of a C810A in revenue service is just the one car. With both the motors and the third rail current collectors, the train cars can be coupled up to 2 cars during service.

The car numbers of the trains range from 42 to 57. Individual cars are assigned a two-digit serial number by the rail operator SBS Transit. A trainset consists of one motor car, e.g. set 42 is car 42. Both digits identify the car number.

• Mitsubishi Heavy Industries built sets 42 – 57.

The serial numbers given are underlined, indicating they have the new signalling system.