| Obice da 149/19 modello 37 | |
|---|---|
.JPG) An Obice da 149/19 modello 37, taken outside Forte di San Leo | |
| Type | Heavy howitzer |
| Place of origin | Italy |
| Service history | |
| In service | 1939-1951 |
| Used by |  Italy |
| Wars | World War II |
| Production history | |
| Designed | 1930-1939 |
| Manufacturer | Oto, Ansaldo |
| Produced | 1939?-1945 |
| Specifications | |
| Mass | 5,500 kg (12,100 lb) |
| Barrel length | 3.034 m (9 ft 11 in) L/20.4 |
| Shell | 42.55 kg (93 lb 13 oz) |
| Caliber | 149.1 mm (5.87 in) |
| Carriage | Split trail |
| Elevation | +5° to +60° |
| Traverse | 50° |
| Muzzle velocity | 597 m/s (1,959 ft/s) |
| Maximum firing range | 14,250 m (15,580 yd) |
The Obice da 149/19 modello 37 was a heavy howitzer which served with Italy during World War II. It was intended to replace Italy's assortment of World War I-era heavy howitzers, but this was prevented by the prolonged development time and the very slow pace of production. Despite orders totaling 1392 weapons only 147 had been built by September 1942. There were three models, the 37, 41 and 42, differing only in details. The standard tractor was the Trattore SPA TM 40. The Germans kept it in production with the designation of 15 cm sFH 404(i) after the Italian surrender in 1943. With the same weight it had superior range compared to the German 15 cm sFH 18. It was used by the Italian army until 1974.
