|◌ª | ◌º|
(feminine | masculine)
|In Unicode||U+00AA ª FEMININE ORDINAL INDICATOR (ª)|
U+00BA º MASCULINE ORDINAL INDICATOR (º)
|Different from||U+00B0 ° DEGREE SIGN|
U+02DA ˚ RING ABOVE
In written languages, an ordinal indicator is a character, or group of characters, following a numeral denoting that it is an ordinal number, rather than a cardinal number. In English orthography, this corresponds to the suffixes -st, -nd, -rd, -th in written ordinals (represented either on the line 1st, 2nd, 3rd, 4th or as superscript, 1st, 2nd, 3rd, 4th).
Also commonly encountered are the superscript or superior (and often underlined) masculine ordinal indicator, º, and feminine ordinal indicator, ª, originally from Romance and then via the cultural influence of Italian, as in 1º primo and 1ª prima. In correct typography, the ordinal indicators ª and º should be distinguishable from other characters.
The practice of underlined (or doubly underlined) superscripted abbreviations was common in 19th-century writing (not limited to ordinal indicators in particular, and also extant in the numero sign №), and was also found in handwritten English until at least the late 19th century (e.g. first abbreviated 1st or 1st).
In Spanish, Portuguese, Italian, and Galician, the ordinal indicators º and ª are appended to the numeral depending on whether the grammatical gender is masculine or feminine. The indicator may be given an underline but this is not ubiquitous. In digital typography, this depends on the font: Cambria and Calibri, for example, have underlined ordinal indicators, while most other fonts do not.
Examples of the usage of ordinal indicators in Italian are:
Galician also forms its ordinal numbers this way, while Asturian follows a similar system where ᵘ is used for the masculine gender, ª for the feminine gender and º for the neuter gender.
In Spanish, using the two final letters of the word as it is spelled is not allowed, except in the cases of primer (an apocope of primero) before singular masculine nouns, which is not abbreviated as 1.º but as 1.er, of tercer (an apocope of tercero) before singular masculine nouns, which is not abbreviated as 3.º but as 3.er, and of compound ordinal numbers ending in primer or tercer. For instance, 'twenty-first' is vigésimo primer before a masculine noun, and its abbreviation is 21.er. Since none of these words are shortened before feminine nouns, their correct forms for those cases are primera and tercera. These can be represented as 1.ª and 3.ª. As with other abbreviations in Spanish, the ordinal numbers have a period ".", which is placed before the indicator. Portuguese follows the same method.
The practice of indicating ordinals with superscript suffixes may originate with the practice of writing a superscript o to indicate a Latin ablative in pre-modern scribal practice. This ablative desinence happened to be frequently combined with ordinal numerals indicating dates (as in tertio die (written iiio die) 'on the third day' or in Anno Domini years, as in anno millesimo [...] ab incarnatione domini nostri Iesu Christi (written an ͂ Mo [...] dm ͂i nri ih ͂u xp ͂i or similarly) "in the thousandth [...] year after the incarnation of our lord Jesus Christ").
The usage of terminals in the vernacular languages of Europe derives from Latin usage, as practised by scribes in monasteries and chanceries before writing in the vernacular became established. The terminal letters used depend on the gender of the item to be ordered and the case in which the ordinal adjective is stated, for example primus dies ('the first day', nominative case, masculine), but primo die ('on the first day', ablative case masculine), shown as Io or io. As monumental inscriptions often refer to days on which events happened, e.g. "he died on the tenth of June", the ablative case is generally used: Xo (decimo) with the month stated in the genitive case. Examples:
See also: Superior letters
The masculine ordinal indicator º may be confused with the degree sign ° (U+00B0), which looks very similar and which is provided on the Italian and Latin American keyboard layouts. It was common in the early days of computers to use the same character for both. The degree sign is a uniform circle and is never underlined. The masculine ordinal indicator is the shape of a lower-case letter o, and thus may be oval or elliptical, and may have a varying line thickness.
Ordinal indicators may also be underlined. It is not mandatory in Portugal nor in Brazil, but it is preferred in some fonts to avoid confusion with the degree sign.
Also, the ordinal indicators should be distinguishable from superscript characters. The top of the ordinal indicators (i.e., the top of the elevated letter a and letter o) must be aligned with the cap height of the font. The alignment of the top of superscripted letters a and o will depend on the font.
The line thickness of the ordinal indicators is always proportional to the line thickness of the other characters of the font. Many fonts just shrink the characters (making them thinner) to draw superscripts.
The Romance feminine and masculine ordinal indicators were adopted into the 8-bit ECMA-94 encoding in 1985 and the ISO 8859-1 encoding in 1987 (both based on DEC's Multinational Character Set designed for VT220), at positions 170 (xAA) and 186 (xBA), respectively. ISO 8859-1 was incorporated as the first 256 code points of ISO/IEC 10646 and Unicode in 1991. The Unicode characters are thus:
There are superscript versions of the letters ⟨a⟩ and ⟨o⟩ in Unicode, these are different characters and should not be used as ordinal indicators.
The majority of character sets intended to support Galician, Portuguese and/or Spanish have those two characters encoded. In detail (in hexadecimal):
|DEC Multinational, ISO-8859-1, ISO-8859-15, CP 819, CP 923, BraSCII, Commodore Amiga, RISC, CP 1004, Windows CP 1252||AA||BA|
|IBM CP 437, IBM CP 860, CP 220, Atari ST, IBM CP 850, IBM CP 859, IBM CP 898||A6||A7|
|IBM CP 037, IBM CP 256, IBM CP 275, IBM CP 282, IBM CP 283, IBM CP 284, IBM CP 500, IBM CP 831, IBM CP 924, IBM CP 1047, IBM CP 1073, IBM CP 1078, IBM CP 1079||9A||9B|
|T.61, Adobe Standard, NextStep Multinational||E3||EB|
|HP Roman-8, Ventura International||F9||FA|
Portuguese and Spanish keyboard layouts are the only ones on which the characters are directly accessible through a dedicated key: º for "º" and ⇧ Shift+º for "ª". On other keyboard layouts these characters are accessible only through a set of keystrokes.
On Windows º can be obtained by Alt+167 or Alt+0186 and ª by Alt+166 or Alt+0170.
In MacOS keyboards, º can be obtained by pressing ⌥ Option+0 and ª can be obtained by pressing ⌥ Option+9.
In Linux, º can be obtained by Ctrl+⇧ Shift+UBAspace and ª by Ctrl+⇧ Shift+UAAspace. There appears to be no Compose key combinations for these characters, despite their commonality.
In the UK-Extended keyboard mapping (available with Microsoft Windows, Linux and ChromeOS) º can be obtained by AltGr+⇧ Shift+M and ª by AltGr+⇧ Shift+F.
On many mobile devices keyboards (tablets, smartphones, etc.) ª and º can be obtained by holding the keys A and O, respectively, and then selecting the desired character. For this option to appear, the selected input language may need to be changed to one where these symbols are used natively. For example, on Microsoft Swiftkey, both are available when 'Italian' is enabled, but not when only 'English' is.
Some languages use superior letters as a typographic convention for abbreviations. Oftentimes, the ordinal indicators º and ª are used in this sense, and not to indicate ordinal numbers. Some might say that this is a misuse of ordinal indicators:
In Basque, Serbo-Croatian, Czech, Danish, Estonian, Faroese, Finnish, German, Hungarian, Icelandic, Latvian, Norwegian, Slovak, Slovene, Turkish, among other languages, a period or full stop is written after the numeral. In Polish the period can be omitted if there is no ambiguity whether a given numeral is ordinal or cardinal. The only exceptions are variables in mathematics (k+1-szy – (k+1)st). Writing out the endings for various cases, as sometimes happens in Czech and Slovak, is considered incorrect and uneducated. Should a period or full stop follow this dot, it is omitted. In Czech and Slovak, numerals with ordinal dot are mostly used only in tables, lists etc., or in case of large (or long) numbers; within a sentence it is recommended to write out the form with letters in full.
The Serbian standard of Serbo-Croatian (unlike the Croatian and Bosnian standards) uses the dot in role of the ordinal indicator only past Arabic numerals, while Roman numerals are used without a dot.
There is a problem with autocorrection, mobile editors, etc., which often force a capital initial letter in the word following the ordinal number.
Further information: English ordinal numbers
In 19th-century handwriting, these terminals were often elevated, that is to say written as superscripts (e.g. 2nd, 34th). With the gradual introduction of the typewriter in the late 19th century, it became common to write them on the baseline in typewritten texts, and this usage even became recommended in certain 20th-century style guides. Thus, the 17th edition of The Chicago Manual of Style states: "The letters in ordinal numbers should not appear as superscripts (e.g., 122nd not 122nd)", as do the Bluebook and style guides by the Council of Science Editors, Microsoft, and Yahoo. Two problems are that superscripts are used "most often in citations" and are "tiny and hard to read". Some word processors format ordinal indicators as superscripts by default (e.g. Microsoft Word). Style guide author Jack Lynch (Rutgers) recommends turning off automatic superscripting of ordinals in Microsoft Word, because "no professionally printed books use superscripts".
French uses the ordinal indicators er (1er – premier), re in feminine (1re – première), e (2e – deuxième). French also uses the indicator d for the variant 2d – second; in feminine this indicator becomes de: 2de – seconde. In plural, all these indicators take a S: ers (1ers – premiers), res (1res – premières), es (2es – deuxièmes), ds (2ds – seconds), des (2des – secondes).
These indicators use superscript formatting whenever it is available.
The rule in Catalan is to follow the number with the last letter in the singular and the last two letters in the plural. Most numbers follow the pattern exemplified by vint '20' (20è m sg, 20a f sg, 20ns m pl, 20es f pl), but the first few ordinals are irregular, affecting the abbreviations of the masculine forms. Superscripting is not standard.
Unlike other Germanic languages, Dutch is similar to English in this respect: the French layout with e used to be popular, but the recent spelling changes now prescribe the suffix ‑e. Optionally ‑ste and ‑de may be used, but this is more complex: 1ste (eerste), 2de (tweede), 4de (vierde), 20ste (twintigste)...
In Finnish orthography, when the numeral is followed by its head noun (which indicates the grammatical case of the ordinal), it is sufficient to write a period or full stop after the numeral: Päädyin kilpailussa 2. sijalle 'In the competition, I finished in 2nd place'. However, if the head noun is omitted, the ordinal indicator takes the form of a morphological suffix, which is attached to the numeral with a colon. In the nominative case, the suffix is ‑nen for 1 and 2, and ‑s for larger numerals: Minä olin 2:nen, ja veljeni oli 3:s 'I came 2nd, and my brother came 3rd'. This is derived from the endings of the spelled-out ordinal numbers: ensimmäinen, toinen, kolmas, neljäs, viides, kuudes, seitsemäs...
The system becomes rather complicated when the ordinal needs to be inflected, as the ordinal suffix is adjusted according to the case ending: 3:s (nominative case, which has no ending), 3:nnen (genitive case with ending ‑n), 3:tta (partitive case with ending ‑ta), 3:nnessa (inessive case with ending ‑ssa), 3:nteen (illative case with ending ‑en), etc. Even native speakers sometimes find it difficult to exactly identify the ordinal suffix, as its borders with the word stem and the case ending may appear blurred. In such cases it may be preferable to write the ordinal word entirely with letters and particularly 2:nen is rare even in the nominative case, as it is not significantly shorter than the full word toinen.
Numerals from 3 up form their ordinals uniformly by adding the suffix -ú: 3ú, 4ú, 5ú, etc. When the ordinal is written out, the suffix adheres to the spelling restrictions imposed by the broad/slender difference in consonants and is written -iú after slender consonants; but when written as numbers, only the suffix itself (-ú) is written. In the case of 4 (ceathair), the final syllable is syncopated before the suffix, and in the case of 9 (naoi), 20 (fiche), and 1000 (míle), the final vowel is assimilated into the suffix.
Most multiples of ten end in a vowel in their cardinal form and form their ordinal form by adding the suffix to their genitive singular form, which ends in -d; this is not reflected in writing. Exceptions are 20 (fiche) and 40 (daichead), both of whom form their ordinals by adding the suffix directly to the cardinal (fichiú and daicheadú).
When counting objects dó (2) becomes dhá and ceathair (4) becomes ceithre.
As in French, the vigesimal system is widely used, particularly in people's ages. Ceithre scór agus cúigdéag – 95.
The numbers 1 (aon) and 2 (dó) both have two separate ordinals: one regularly formed by adding -ú (aonú, dóú), and one suppletive form (céad, dara). The regular forms are restricted in their usage to actual numeric contexts, when counting. The latter are also used in counting, especially céad, but are used in broader, more abstract senses of 'first' and 'second' (or 'other'). In their broader senses, céad and dara are not written as 1ú and 2ú, though 1ú and 2ú may in a numeric context be read aloud as céad and dara (e.g., an 21ú lá may be read as an t-aonú lá is fiche or as an chéad lá is fiche).
|1||a h-aon||aonú (1ú) or céad|
|2||a dó||dóú (2ú) or dara|
|3||a trí||tríú (3ú)|
|4||a ceathair||ceathrú (4ú)|
|5||a cúig||cúigiú (5ú)|
|6||a sé||séú (6ú)|
|7||a seacht||seachtú (7ú)|
|8||a hocht||ochtú (8ú)|
|9||a naoi||naoú (9ú)|
|10||a deich||deichiú (10ú)|
|20||fiche or scór||fichiú (20ú)|
|40||daichead, ceathracha or dhá scór||daicheadú or ceathrachadú (40ú)|
|60||seasca or trí scór||seascadú (60ú)|
|80||ochtó or ceithre scór||ochtódú (80ú)|
Further information: Russian numerals
One or two letters of the spelled-out numeral are appended to it (either after a hyphen or, rarely, in superscript). The rule is to take the minimal number of letters that include at least one consonant phoneme. Examples: 2-му второму /ftɐromu/, 2-я вторая /ftɐraja/, 2-й второй /ftɐroj/ (note that in the second example the vowel letter я represents two phonemes, one of which (/j/) is consonant).
Further information: Swedish numerals
The general rule is that :a (for 1 and 2) or :e (for all other numbers, except 101:a, 42:a, et cetera, but including 11:e and 12:e) is appended to the numeral. The reason is that -a and -e respectively end the ordinal number words. The ordinals for 1 and 2 may however be given an -e form (förste and andre instead of första and andra) when used about a male person (masculine natural gender), and if so they are written 1:e and 2:e. When indicating dates, suffixes are never used. Examples: 1:a klass ('first grade (in elementary school)'), 3:e utgåvan ('third edition'), but 6 november. Furthermore, suffixes can be left out if the number obviously is an ordinal number, example: 3 utg. ('3rd ed'). Using a full stop as an ordinal indicator is considered archaic, but still occurs in military contexts. Example: 5. komp (5th company).
Numbers in Malay and Indonesian are preceded by the ordinal prefix ke-; for example, ke-7, 'seventh'. The exception is pertama which means 'first'.
Numbers in Filipino are preceded by the ordinal prefix ika- or pang- (the latter subject to sandhi; for example, ika-7 or pam-7, 'seventh'. The exception is una, which means 'first'.
In Chinese and Japanese, an ordinal number is prefixed by 第 dì / dai; for example, 第一 'first', 第二 'second'.
In Korean, an ordinal number is prefixed by 제 je or suffixed by 번째 beonjjae; for example, 제 1 'first', 2번째 'second'.
Note: Traditionally in Portuguese the ordinal characters should contain the underline. The underline helps avoid confusion between the masculine ordinal and the degree character. This is important at low resolution, such as the screen, when both characters are very similar in size and shape.
Peirce also regularly used the nineteenth-century calligraphic convention of double underlining superscript portions of abbreviations such as Mr or 1st.
Bluebook rule 6.2(b)(i) (19th ed. 2010)
[...] ordinal numbers [...] no professionally printed books use superscripts [...]