You do not have permission to edit this page, for the following reasons:

This IP address has been blocked from editing Wikipedia.
This does not affect your ability to read Wikipedia pages.
Most people who see this message have done nothing wrong. Some kinds of blocks restrict editing from specific service providers or telecom companies in response to recent abuse or vandalism, and can sometimes affect other users who are unrelated to that abuse. Review the information below for assistance if you do not believe that you have done anything wrong.

The IP address or range 44.201.0.0/16 has been blocked (disabled) by ‪ST47‬ for the following reason(s):

The IP address that you are currently using has been blocked because it is believed to be a web host provider. To prevent abuse, web hosts may be blocked from editing Wikipedia.
You will not be able to edit Wikipedia using a web host provider because it hides your IP address, much like a proxy or VPN.
We recommend that you attempt to use another connection to edit. For example, if you use a proxy or VPN to connect to the internet, turn it off when editing Wikipedia. If you edit using a mobile connection, try using a Wi-Fi connection, and vice versa. If you are using a corporate internet connection, switch to a different Wi-Fi network. If you have a Wikipedia account, please log in.
If you do not have any other way to edit Wikipedia, you will need to request an IP block exemption.

How to appeal if you are confident that your connection does not use a web host's IP address:
If you are confident that you are not using a web host, you may appeal this block by adding the following text on your talk page: ((unblock|reason=Caught by a web host block but this host or IP is not a web host. My IP address is _______. Place any further information here. ~~~~)). You must fill in the blank with your IP address for this block to be investigated. Your IP address can be determined here. Alternatively, if you wish to keep your IP address private you can use the unblock ticket request system. There are several reasons you might be editing using the IP address of a web host (such as if you are using VPN software or a business network); please use this method of appeal only if you think your IP address is in fact not a web host.

Administrators: The IP block exemption user right should only be applied to allow users to edit using web host in exceptional circumstances, and they should usually be directed to the functionaries team via email. If you intend to give the IPBE user right, a CheckUser needs to take a look at the account. This can be requested most easily at SPI Quick Checkuser Requests. Unblocking an IP or IP range with this template is highly discouraged without at least contacting the blocking administrator.

This block will expire on 23:54, 31 July 2024.

Even when blocked, you will usually still be able to edit your user talk page, as well as email administrators and other editors.

For information on how to proceed, please read the FAQ for blocked users and the guideline on block appeals. The guide to appealing blocks may also be helpful.

Other useful links: Blocking policy · Help:I have been blocked
Your IP address is in a range that has been blocked on all Wikimedia Foundation wikis. The block was made by ‪AntiCompositeNumber‬. The reason given is Open proxy/Webhost: Visit the FAQ if you are affected .
- Start of block: 13:55, 18 August 2022
- Expiry of block: 13:55, 18 April 2025
Your current IP address is 44.201.28.123. The blocked range is 44.201.0.0/16. Please include all above details in any queries you make. If you believe you were blocked by mistake, you can find additional information and instructions in the No open proxies global policy. Otherwise, to discuss the block please post a request for review on Meta-Wiki. You could also send an email to the stewards VRT queue at stewards@wikimedia.org including all above details.

You can view and copy the source of this page:

((more citations needed|date=February 2022))

[[File:PSTN office classification hierarchy.png|thumb]]
'''PSTN network topology''' is the switching [[network topology]] of a telephone network connected to the [[public switched telephone network]] (PSTN).

In the United States and Canada, the '''Bell System network topology''' was the switching system hierarchy implemented and operated from c. 1930 to the 1980s for the purpose of integrating the diverse array of local telephone companies and telephone numbering plans to achieve nationwide [[Direct Distance Dialing]] (DDD) by telephone subscribers. It was the precursor of the world-wide interconnected [[public switched telephone network]] (PSTN) and originated in the efforts of the [[General Toll Switching Plan]] that by 1929 formulated the technical infrastructure and the operating principles for connecting long-distance telephone calls in North America.<ref name="osborne1930">((cite journal| first=H. S. |last=Osborne |url=https://archive.org/details/bstj9-3-429/mode/1up |title=A General Switching Plan for Telephone Toll Service |journal=Bell System Technical Journal |volume=9 |issue=3 |page=429 |date=July 1930|doi=10.1002/j.1538-7305.1930.tb03208.x |s2cid=51665970 ))</ref>

The ideas were first developed in the [[Bell System]] in the [[United States]], but were soon adopted by other countries where [[telephone company|telephone companies]] were facing similar issues, even when servicing smaller geographic areas. The system in the United Kingdom implemented by the [[General Post Office]] resulted in fewer switching levels than in the Bell System.

==Bell System==
[[Image:PSTN office classification hierarchy.svg|thumbnail|300px|AT&T central office classification hierarchy]]

In the late 1940s the Bell System devised plans to consolidate the various incompatible local [[telephone numbering plan]]s of affiliated and independent service provides in North America into a unified numbering and routing system, that later became known as the [[North American Numbering Plan]] (NANP). Initially designed for use in [[Operator Toll Dialing]], the reorganization was also a prerequisite for [[Direct Distance Dialing]] (DDD) by customers, first implemented in Englewood, New Jersey in 1951. In addition to devising a unified numbering plan, the [[American Telephone and Telegraph Company]] (AT&T) reorganized the switching and routing plan under management by [[AT&T Long Lines]] into a hierarchical network with five levels, termed "classes'' of switching systems.

The newly devised hierarchy was maintained into the early 1980s, when technological advances and business models rendered it increasingly obsolete, but the hierarchical features live on in terms, such as [[Class 4 telephone switch|Class 4]] and [[Class 5 telephone switch]], referring to tandem and end-office switches, respectively. The PSTN in the United States was essentially restructured with the 1984 divestiture of AT&T. The old Long Lines network remained with AT&T, but its internal routing became non-hierarchical with the introduction of advanced computer-controlled switching.  Each major long-distance carrier can have its own internal routing policies, though they generally start with the same principles and even components.

With [[Bell System divestiture]], the network in the US was divided into [[local access and transport area]]s (LATAs). Calls within LATAs were carried by [[Local Exchange Carrier]]s (LECs), while calls between them were carried by [[interexchange carrier]]s (IXCs).  LATAs generally have one or more tandem switches which interconnect end office switches.

While the following discussion refers to AT&T and (principally) to the United States, it is important to remember that until 1975, AT&T controlled [[Bell Canada]] and thus influenced corporate decisions north of the border. Bell Canada provided local operations in most of [[Ontario]] and [[Quebec]], and both in its capacity as the largest telecommunications carrier in Canada and because of its historic operations in the [[Atlantic Canada|Atlantic]] and [[Canadian Prairies|Prairie]] provinces, dominated decisions over long-distance practices. Canadian authorities agreed that integration of Canadian long-distance services into a trans-national network was valuable to both countries, so that U.S. and Canadian services were integrated for networking capabilities at an early stage into what eventually became the foundation for the [[North American Numbering Plan]] area.

By the mid-1920s, a revised manual system where "local" toll operators connected tandem routes (a process formally called Combined Line and Recording) as needed to complete telephone calls, reduced the process to an average of two minutes, but still meant that some complex routing might interconnect as many as sixteen points.  As long-distance services grew in the Contiguous Continental US (48 states) and Canada, the amount of overhead equipment and people required to determine and establish Rates and Routes became excessive. As technology improved, network design included consideration of more automated and defined procedures. Thus, beginning with a switch installed in Philadelphia, Pennsylvania, in 1943, AT&T began to automate the system, and establish a new switch hierarchy, which lasted until the breakup of AT&T in the 1980s.

The underlying principle of the five-level hierarchy was to provide economies of scale by establishing direct connections between centralized call "collection points" (essentially the Class 4 offices) where economically feasible, and to provide additional concentration points (Class 1 through 3) to handle overflow traffic that could not be handled directly, or to handle traffic to locations which were less likely to be dialed from a given point - usually longer distances and/or smaller locations in other parts of the North American dialing plan. The North American plan differed from those of other continents in the existence of three concentration levels of hierarchy for domestic (here defined as including all those points "within" the dialing plan) calls, a need not required where the larger geographic area was broken into several national plan jurisdictions. However, it is important to note that this was not a strict hierarchy of absolute levels. If enough call traffic existed between geographic areas, for example, a Class 4 office could have direct trunk connections not only to a Class 3 office, but to a Class 2 or Class 1 office, and vice versa. For example, the Class 2 switch in Toronto (TOROON0101T2) had connections not only to the Class 1 switch in Montréal (MTRLPQ0201T1), but to the Class 1 switch in White Plains (WHPLNY0201T1), one of the Class 2 switches in New York City (NYCMNYAA02T2) and a Class 3 switch in Buffalo (BFLONYFR04T3). Network engineers re-worked the system as necessary to balance off call completion percentages with budgetary limitations. In fact, minor changes were made almost every month.

Initially excluded from the development of the North American network were locations that eventually would become part of the North American Numbering Plan Area - Alaska, Hawaii, some other United States possessions, various outlying Northern and rural portions of Canada, and much of the Caribbean. These areas were handled as International Calls until more advanced computer hardware and software allowed them to be included in the automated, integrated systems in later decades. After the spread of stored program control switching, many services of Class 1 through 3 could be delegated to newer switches in the class 4 and 5 offices, and that portion of the network became obsolete, although it was partially replaced by the establishment of multiple long-distance carrier networks, connected to the local networks through their [[point of presence|points of presence]].

===Class 1 (Regional Center)===
The class 1 office was the Regional Center (RC). Regional centers served three purposes in the North American toll network (a) their connections were the "last resort" for final setup of calls when routes between centers lower in the hierarchy were not available (b) they were initially staffed by engineers who had the authority to block portions of the network within the region in case of emergencies or network congestion - although these functions were transferred after 1962 to the Network Control/Operations Center and the distributed Network Management Centers (see below) (c) they provided collection points (until the development of more advanced computer hardware and software for toll operators) for circuits that would be passed along to one of the international overseas gateways (which operated as special centers outside the formal North American hierarchy). The regional centers updated each other on the status of every circuit in the network. These centers would then reroute traffic around the trouble spots and keep each informed at all times. There were twelve Regional Centers in North America, ten in the United States, nine of which were operated by AT&T ([[White Plains, NY]], [[Wayne, PA]], [[Pittsburgh, PA]], [[Norway, Illinois|Norway, IL]] [a rural crossroads west of Chicago at the intersection of US highway 52 and IL highway 71 - an underground office built with hardened construction to withstand nuclear attack], [[Conyers, Georgia|Conyers, GA]] in [[Rockdale County, Georgia|Rockdale County]], [[St Louis, MO]], [[Dallas, TX]], [[Denver, CO]], [[Sacramento, CA]]), and one in a GTE service area ([[San Bernardino, CA]]). Two centres in Canada were operated on behalf of the Trans-Canada Telephone System, one by Bell Canada ([[Montréal, PQ]]), and one by [[SaskTel|Saskatchewan Telephone]], ([[Regina, SK]]).

For control and oversight of the entire network hierarchy, AT&T established a Network Control Center in [[New York City]] in 1962, renamed the Network Operations Center and relocated to [[Bedminster, NJ]] in 1977. Engineering supervision was also centralized in eight regional Network Management Centers. The realignment and dispersion of functions were done, in part, to ensure maximum network integrity in the event of a national emergency, a major concern in that era. The basic structure of this unit, although significantly altered since the [[AT&T divestiture]] in the 1980s, still exists as the Global Operations Center, with domestic regional centers in Colorado and Georgia.

===Class 2 (Sectional Center)===
The class 2 office was the Sectional Center (SC). The sectional center typically connected major toll centers within one or two states or provinces, or a significant portion of a large state or province, to provide interstate or interprovincial connections for long-distance calls. At various times, there were between 50 and 75 active class two offices in the network.

===Class 3 (Primary Center)===
The class 3 office was the Primary Center (PC).  Calls being made beyond the limits of a small geographical area where circuits are not connected directly between class 4 toll offices would be passed from the toll center to the primary center. These locations use high usage trunks to complete connection between toll centers. The primary center never served dial tone to the user. The number of primary centers in the network fluctuated from time to time, ranging between 150 and 230.

===Class 4 (Toll Center)===
((Main|Class 4 telephone switch))
The class 4 office is the Toll Center (TC), Toll Point (TP), or Intermediate Point (IP). A call going between two end offices not directly connected, or whose direct trunks are busy, is routed through the toll center. The toll center is also used to connect to the long-distance network for calls where added costs are incurred, such as operator handled services. This toll center may also be called the tandem office because calls have to pass through this location to get to another part of the network. Toll centers might have been operated either as interstate facilities, under the operation of AT&T Long Lines (GTE in a few cases), or by local telephone companies, handling long-distance traffic to points within a particular operating company territory. Class 4 offices continue to exist, although with considerable changes, as they handle local exchange company interconnections, locally charged or long-distance rated, or provide facilities for connection to long-distance company points of presence.

===Class 5 (local exchange)===
((Main|Class 5 telephone switch))
The class 5 office is the local exchange or end office. It delivers dial tone to the customer. The end office, also called a branch exchange, is the closest connection to the end customer. Over 19,000 end offices in the United States alone provide basic [[dial tone]] services.

In modern times only the terms Class 4 and Class 5 are much used, as any tandem office is referred to as a Class 4 system. This change was prompted in part by changes in the power of switches and the relative cost of transmission, both of which tended to flatten the switch hierarchy. The breakup of the Bell System, and the need for each of the surviving regional operating companies to handle long-distance interconnections, also promoted the inclusion of inter-regional and international processing through larger Class 4 offices.

===International overseas call centers===
The special requirements of placing calls to locations outside main Canadian/United States points meant that these calls were handled by special operators in locations where connections could be monitored to other countries. The technology to automate these connections through "regular" operator traffic positions  began to develop in the 1960s (see Bell Laboratories Record 42:7, July–August 1964). As the decade of the 1970s progressed, North American customers who were served by electronic offices began to be able to directly dial to an increasing number of international points, a service known as [[IDDD]] (International Direct Distance Dialing), (service between ESS offices in New York and London began on March 1, 1970). However, since points could not be connected until equipment in both countries was converted to electronic switching, implementation to many locations took some time, and while the majority of calls began to be connected via automated systems by the 1990s - after the termination of the five-level hierarchy - the majority of countries were still connected via manual intervention until the beginning of the 21st century.

Please note that the currently attached diagram of switch hierarchy is incorrect, as it identifies Class 1 points with International switching. International connections were located in places generally close to cable, later satellite, termination locations, and were not directly related to Class 1 switches. Major international connection points were located in Oakland, California; Miami, Florida; and New York, New York, with a number of secondary international operator toll points. Only after the rapid expansion of ESS terminal offices did operator handling of international calls begin to be off-loaded into the domestic network structure, as international calling services began to be customer dialable, ca. the mid-1980s. This in part paralleled the demise of the five-level hierarchy, so identification of international switches and class one offices is incorrect.

==United Kingdom==
The forerunner of [[British Telecom]], the [[General Post Office]], also organized its intercity trunk network along similar hierarchical lines to that of North America. However, because of the significantly smaller geographic area involved, fewer levels of connection were required, and no formal numbering of class offices was made.

There were a few special exceptions to the following description, notably those involving [[Northern Ireland]], some of the [[Channel Islands|Channel Dependencies]], and the few locations in England which were served by non-GPO companies, such as [[Kingston upon Hull|Hull]] ([[KCOM Group]]) and [[Portsmouth]]. ((Citation needed|date=August 2008))

In the early days of manual exchanges, outlying areas (eventually called dependent exchanges) were connected through progressively larger locations (eventually called group switching centres) into one of the main cities - [[Birmingham]], [[Edinburgh]], [[Glasgow]], [[Liverpool]], [[London]], and [[Manchester]]. As automation began to be established in the network, this was refined into a system of approximately fifty tandem locations for Group Switching Centres, with an additional layer of perhaps a dozen Wide Area Tandems to provide for busy periods, emergency routing, etc. There were also some additional Local Tandems to handle traffic in the London Metropolitan Area without involving the GSCs, although this was a later development, as it required common control signalling for identification.

===Subscriber trunk dialing===
The dialing codes used by trunk operators to connect calls were originally assigned and established to ensure speed with pulse dialing equipment. With the advent of subscriber dialed calls, numbering patterns were reassigned to provide for mnemonic methods of improving customer performance. [[Subscriber trunk dialling]] (STD) codes all began with 0. The largest cities, which had seven digit local numbers, were allocated special codes - London, 01; Birmingham, 021; etc. Smaller towns were typically allocated a code based on the first letters of their name, translated into digits on the telephone dial. For example, OXford translated into 09 on the British phone dial, so the original STD code for Oxford was 0096. However, because of subscriber dialing errors, there was an early decision to eliminate codes that began with ''00'' and Oxford soon became 0865, the sequence ''86'' designating the first two letter of ''university''.

Some of the smallest towns connected to the trunk network only through nearby switches. In those cases, STD codes were composed of combination of the code for the nearby switch, plus some additional digits that were unused in that nearby switch, but which served two purposes (1) to identify the end location, and allow the nearby switch to complete the call (2) to "pad out" the overall length of the dialing string, since a small town might only have a three-digit telephone number, and allow the network to move to a more-standard number length.

As [[Strowger switch]]es were retired and replaced with electronic systems, Subscriber Trunk Dialing codes no longer followed the original rules, and were significantly revised in the mid-1990s, with further changes as wider use of mobile phones and non-BT competition came into the UK market. There are now((when|date=January 2022)) some 70000 local exchange codes in use in the UK((Citation needed|date=July 2008)). The largest trunk carrier, British Telecom, connects the local network through some 60 transit (tandem) switches.

==France==

===Early days===
The early history of the telecommunications switching [[Telecommunications in France|network in France]] is, unusually for this country, one of decentralized development. Early telephone exchanges were installed by local communities, often by private companies, and only later taken over by the French government. As a result, by 1930, France was served by almost 25,000 local exchanges, but almost half of these had fewer than five subscribers. Additionally, telephones were not considered important for residential customers (nor for small businesses), so France had a low penetration rate of telephone subscribers.

Under these conditions, early network development revolved around two major distinctions, "Paris" and "not Paris." Within metropolitan Paris, automated step-by-step (Strowger) switches appeared, with a level of tandem switching, before World War II. In the rest of the country, automation was confined to major cities, with a high level of manual intervention.

The French telephone system was heavily damaged in World War II, so that by the end of the War only about 140 automatic exchanges (mostly in Paris and its "banlieues") and 228 manual exchanges were fully operational. Repair of much of the network had been deferred during the war due to lack of parts, as well as co-opting of technical personnel for German military needs.

===Postwar recovery===
Recovery was rapid after the war, and the extensive damage in some ways helped the modernization of the system as new technology was introduced. The DGT (Direction Générale des Télécommunications) introduced automated operator dialing of long-distance connections, generally using the [[INSEE]] codes as "area codes" for the various departments - with special handling for Paris. These codes subsequently became public as customer dialing of long-distance calls began to be introduced in the late 1960s and early 1970s.

The network had a minimal hierarchy, with most connections routed into a central tandem in each department, and from there to Paris. As greater installation of private telephones, for both small business and private residences, increased in the 1970s, direct connections among the tandems in adjacent regions were installed, and a three-level tier of switches, local, tandem, and regional interconnection was implemented, with final routing through Paris. Also, during the 1970s and 1980s, the smaller rural switches were replaced and combined with nearby automated offices, and a closed numbering scheme was adopted for dialing consistency.

===Technological development===
In common with most countries, the development of technology allowed for different networking, and the maintenance of a formal hierarchy disappeared into a distributed network. By the mid-1990s, a revised structure had appeared, reflected by the replacement of the old departmental area codes by the assignment of regional codes and a major renumbering scheme for strategic planning, privatization, and deregulation under the auspices of ART, the ((lang|fr|[[Autorité de Régulation des Communications Électroniques, des Postes et de la Distribution de la Presse]])) (Regulatory Authority for Telecommunications - known since 2005 as ARCEP, as responsibility for postal services was added and later expanded in 2019 to print media distribution). After 1996, the country prepared for complete deregulation of the telephone network.

Thus, the local exchanges (((lang|fr|zones à autonomie d'acheminement))) are connected somewhat differently by various carriers. However, the largest of these, based upon the (partially) privatised former government network, is a two-level long-distance hierarchy, based on 80 CTS (centre de transit secondaire) and 8 CTP (centre de transit primaire) locations. In addition, there are 12 CTI (centre de transit internationaux) for connections to areas which are not integrated into the French telephone network [note that some overseas locations are considered "domestic" for telecommunications purposes].

==References==
((Reflist))

((Telecommunications))

[[Category:Telephony]]

Pages transcluded onto the current version of this page (help):

PSTN network topology (edit)
Template:Ambox (view source) (template editor protected)
Template:Category handler (view source) (protected)
Template:Citation needed (view source) (protected)
Template:Cite journal (view source) (protected)
Template:Delink (view source) (protected)
Template:Find sources mainspace (view source) (template editor protected)
Template:Fix (view source) (protected)
Template:Fix/category (view source) (protected)
Template:Hlist/styles.css (view source) (protected)
Template:Icon (view source) (template editor protected)
Template:Lang (view source) (template editor protected)
Template:Main (view source) (template editor protected)
Template:Main other (view source) (protected)
Template:More citations needed (view source) (template editor protected)
Template:Navbox (view source) (template editor protected)
Template:Portal-inline (view source) (template editor protected)
Template:Reflist (view source) (protected)
Template:Reflist/styles.css (view source) (protected)
Template:Telecommunications (view source) (semi-protected)
Template:When (view source) (template editor protected)
Module:Arguments (view source) (protected)
Module:Category handler (view source) (protected)
Module:Category handler/blacklist (view source) (protected)
Module:Category handler/config (view source) (protected)
Module:Category handler/data (view source) (protected)
Module:Category handler/shared (view source) (protected)
Module:Check for unknown parameters (view source) (protected)
Module:Citation/CS1 (view source) (protected)
Module:Citation/CS1/COinS (view source) (protected)
Module:Citation/CS1/Configuration (view source) (protected)
Module:Citation/CS1/Date validation (view source) (protected)
Module:Citation/CS1/Identifiers (view source) (protected)
Module:Citation/CS1/Utilities (view source) (protected)
Module:Citation/CS1/Whitelist (view source) (protected)
Module:Citation/CS1/styles.css (view source) (protected)
Module:Delink (view source) (protected)
Module:Exponential search (view source) (template editor protected)
Module:Find sources (view source) (template editor protected)
Module:Find sources/config (view source) (template editor protected)
Module:Find sources/links (view source) (template editor protected)
Module:Find sources/templates/Find sources mainspace (view source) (template editor protected)
Module:Format link (view source) (template editor protected)
Module:Hatnote (view source) (template editor protected)
Module:Hatnote/styles.css (view source) (template editor protected)
Module:Hatnote list (view source) (template editor protected)
Module:Icon (view source) (template editor protected)
Module:Icon/data (view source) (template editor protected)
Module:Labelled list hatnote (view source) (template editor protected)
Module:Lang (view source) (template editor protected)
Module:Lang/ISO 639 synonyms (view source) (template editor protected)
Module:Lang/data (view source) (template editor protected)
Module:Language/data/iana languages (view source) (template editor protected)
Module:Language/data/iana regions (view source) (template editor protected)
Module:Language/data/iana scripts (view source) (template editor protected)
Module:Language/data/iana suppressed scripts (view source) (template editor protected)
Module:Language/data/iana variants (view source) (template editor protected)
Module:Message box (view source) (protected)
Module:Message box/ambox.css (view source) (protected)
Module:Message box/configuration (view source) (protected)
Module:Namespace detect/config (view source) (protected)
Module:Namespace detect/data (view source) (protected)
Module:Navbar (view source) (protected)
Module:Navbar/configuration (view source) (protected)
Module:Navbar/styles.css (view source) (protected)
Module:Navbox (view source) (template editor protected)
Module:Navbox/configuration (view source) (template editor protected)
Module:Navbox/styles.css (view source) (template editor protected)
Module:Portal (view source) (template editor protected)
Module:Portal-inline (view source) (template editor protected)
Module:Portal/images/t (view source) (template editor protected)
Module:String (view source) (protected)
Module:TableTools (view source) (protected)
Module:Unicode data (view source) (template editor protected)
Module:Unicode data/scripts (view source) (template editor protected)
Module:Unsubst (view source) (protected)
Module:Yesno (view source) (protected)

Return to PSTN network topology.

Retrieved from "https://en.wikipedia.org/wiki/PSTN_network_topology"