The Peugeot 505 is a large family car produced by the French manufacturer Peugeot from 1978 to 1992 in Sochaux, France. It was also manufactured in various other countries including Argentina (by Sevel from 1981 to 1995), China, Thailand, Indonesia and Nigeria. The 505 was Peugeot's last rear-wheel drive car.[6]
According to the manufacturer, 1,351,254 505s were produced between 1978 and 1992 with 1,116,868 of these being saloons/sedans.[7]
History
An early 1980 Peugeot 505, photographed in 1981Prototype Peugeot 505 cabrioletPrototype Peugeot 505 coupé
Officially unveiled on 16 May 1979,[8] the 505 was the replacement for the 504 with which it shared many of its underpinnings.[9] It was originally available as a sedan/saloon; a station wagon/estate, including an eight-passenger Familiale version, were introduced at the 1982 Geneva Motor Show.[10] The styling, a collaboration between Pininfarina and Peugeot's internal styling department, is very similar to that of the smaller 305.[9] The original interior was designed by Paul Bracq, generally more well known for his work for Mercedes-Benz and BMW.[11] It is known as the "Work Horse" of Africa today.[citation needed] The front-engine, rear-wheel-drive layout differentiated the 505 from many of its marketplace competitors.[12]
After initially being produced only in left-hand drive form for its first few months, the 505 was available in right-hand drive form for the UK market from October 1979. Its best selling competitor in the UK was the Ford Granada.
Peugeot 505 interior
The 505 was praised by contemporary journalists for its ride and handling, especially on rough and unmade roads; perhaps one reason for its popularity in less developed countries. The 505 also had good ground clearance; if it wasn't enough though, Dangel offered a taller four-wheel drive version of the 505 Break/Familiale equipped with either the intercooled turbodiesel 110 hp (81 kW) engine or the 130 hp 2.2 L petrol (96 kW) engine. The four-wheel drive 505s converted by Dangel also have shorter gear ratios.[13] Initially higher-end petrol models used a fuel-injected alloy engine while lower-end models models used a carburettor, with a diesel also sold.[12]
The estate model was launched in 1982, and was available with seven seats, just like the Peugeot 504 estate. Also new in 1982 was the fully equipped 505 STI, equipped with the all-new 2165 cc four-cylinder Douvrin engine developed together with Renault.[14]
The range was given a facelift, including an all new interior, in 1986, but European Peugeot 505 production began to wind down following the launch of the smaller Peugeot 405 in 1987. Saloon production came to a halt in 1989, when Peugeot launched its new flagship 605 saloon, while the estate remained in production until 1992 - although plans for an estate version of the 605 never materialised. The 605 was in production for a decade but never matched the popularity of the 505. In some countries such as France and Germany, the 505 estate was used as an ambulance, a funeral car, police car, military vehicle and as a road maintenance vehicle. There were prototypes of 505 coupés and 505 trucks, and in France many people have modified 505s into pickup trucks themselves.
The 505 was one of the last Peugeot models to be sold in the United States, with sedan sales ending there in 1990 and wagon sales in 1991. The last sedans sold had PRV's 2.8 V6 engine only. Unique to the US were turbocharged station wagons, both with petrol and diesel engines. 505s were also assembled and sold in Australia. First introduced in October 1980, they were initially assembled by Renault Australia.[15] In March 1981 Leyland Australia took over and kept assembling the 505 until the end of 1983.[2] During 1983, Leyland Australia became Jaguar Rover Australia (JRA) and the new company kept selling Peugeots. From 1984 on, 505s sold in Australia were imported fully built up from France. The 505 was also built in Argentina, Chile, China, and New Zealand. In New York City, Peugeot 505 diesels were briefly used as taxicabs.
Guangzhou-Peugeot 505 SX2 (China, abandoned)
In Thailand, the Peugeot 505 sold well. It was available as a CKD version assembled in Bangkok, due to the restrictions on importing completely built-up cars.
Mechanical characteristics
The 505 had rear-wheel drive and the engine at the front, mounted longitudinally. The suspension system included MacPherson struts and coil springs at front and semi-trailing arms with coil springs at rear, with a body-mounted rear differential and four constant-velocity joints. Station wagons (and most sedans built in Argentina) had instead a live-axle rear suspension, with Panhard rod and coil springs. Stabilizer bars were universal at front but model-dependent at rear. The car used disc brakes at the front, and either disc or drum brakes at the rear, depending on the model. The steering was a rack and pinion system, which was power assisted on most models.
Introduced in the spring of 1982, the Break (Estate) and Familiale versions were quite different from saloons. The wheelbase was also longer, to help make it one of the most spacious in the market, at 2,900 mm (114.2 in). This was, not coincidentally, the same exact wheelbase as had been used on both the 404 and 504 estate derivatives.[10]
The Familiale (family estate), with its third row of bench seats (giving a total of eight forward-facing seats), was popular with larger families and as a taxi. The two rows of rear seats could be folded to give a completely flat load area, with 1.94 cubic metres of load capacity. The total load carrying capacity is 590 kg (1,301 lb). When released, it was hailed as a luxury touring wagon. The Familiale was marketed as the "SW8" in the United States, for "station wagon, eight seats."
In France, Dangel produced a modified version of the Peugeot 505 Break with high suspension and 4WD, which made it look like an early crossover SUV.
Engines
A range of diesel and petrol engines were offered.[16] The first diesels (XD2) arrived in July 1979, two months after the petrol versions.[9] The turbocharged petrol unit was first seen in 1984 (for the 1985 model year in the United States).[17]
505s were mainly equipped with inline-four-cylinder engines, although there was a short run of petrol V6's built after 604 production had come to an end.
Peugeot 505 models varied very much in equipment. Base SRD cars with the 2,304 cc diesel engine didn't even have power steering, but the GTD Turbo, the GTI, the V6, and the TI all had power steering, central locking doors, air conditioning, a five-speed manual transmission, sunroof (except the GTD Turbo), and front fog lights. In the V6, the power steering was speed-sensitive, the central locking doors came with an infrared remote, and the heating and ventilation systems included electronic climate control. A three-speed automatic transmission was available on early 505s, which was later replaced by a four-speed unit. The most durable 505 model proved to be the GTD with a five-speed manual transmission. In Australia, the 505 was sold as a GR, SR, STi, or GTi sedan, or an SR or GTi eight-seater station wagon, all with petrol engines. Very few GRD and SRD diesel-engined 505s were sold in Australia. The Series II update saw the SR replaced with an SLi.
North America
The United States and Canada had their own 505 body, which arrived for 1980 and was first introduced on the French Caribbean island of Martinique.[11] Notable differences were: gas tank moved inwards (now behind rear bench), with filling neck on rightside, different style quad headlamps, taillights (pre-1986 sedans), distinctive whip antenna moved from roof to rear fender (and changed to telescopic), larger bumpers, tailpipe moved from right to left. Fewer engines were offered, all detuned to meet more restrictive emission standards. The models sold in North America were: Base, "GL", "S", "GLS", "STI", "DL", "Liberté", "STX", "Turbo", "GLX", "SW8", "V6", "Turbo S". Originally, only the 96 hp (72 kW) 2.0-liter four was offered, alongside the 2.3-liter diesel with 71 hp (53 kW). Both were carryovers from the 504, although the gasoline unit had gained eight horsepower thanks to the introduction of fuel injection.[21]
Diesel sales were strong in the aftermath of the energy crisis, with diesels reaching a peak level representing 85 percent (14,430 diesels) of the company's US sales in 1981 (their best year in the US). Both the XD2S and larger XD3T were available in the US for model years 1985 and 1986, with the smaller engine being fitted to station wagons. By 1986, after the Oldsmobile diesel debacle and many years of stable fuel prices, only the turbodiesel remained and diesel sales were down to a share of just over 10 percent (1,545 out of 14,439).[22] New for 1987 was the limited edition Liberté model (so named in honor of the centennial celebration of the Statue of Liberty).[22] The well equipped Liberté was priced considerably higher than the 2.2-litre GL, close to the GLS model, but received the much less powerful 2-liter petrol "four" producing 97 hp (72 kW) in the sedan and 95 hp (71 kW) in the wagon.[23] Diesel engines were no longer available in the US after 1987.[24]
All North-American bound 505's were built in Peugeot's Sochaux Plant, in France. In December 1980, as a late introduction for the 1981 model year, a 2.3-liter turbodiesel model with 80 hp (60 kW) arrived.[25] Unlike the naturally aspirated model, the turbodiesel received a five-speed manual as standard fitment.[26] The turbodiesel was very successful as it had no direct competitors in the United States market and represented nearly half of all Peugeot sales during the first model year.[25] In the late spring of 1984, the 1985 505 Turbo arrived. The engine was similar to the one seen in Europe, albeit initially without an intercooler. Max power for 1985 was 142 hp (106 kW).[17] This eventually climbed to 180 hp (134 kW) for later model years. The Turbo estate version was unique to the North American markets.
Early model Peugeot 505 Diesel with round headlamps (USA)
1987 Peugeot 505 Turbo S, showing North America-specific taillights and exhaust on the left (USA)
1991 Peugeot 505 Turbo SW8 - the eight-seater version of the Turbo wagon, never sold outside of North America
1992 Peugeot 505 DL Station Wagon - late US-market models received large, deep-skirted bumpers
Notes and references
Flammang, James M. (1994). Standard Catalog of Imported Cars, 1946-1990. Iola, WI: Krause Publications, Inc. ISBN0-87341-158-7.
^Allain, François (1996). Guide Peugeot: Tous le modèles de 1970 à 1990 (in French). E/P/A. p. 60. ISBN2-85120-493-9.
^Musée de l'Aventure Peugeot. The exhibit label (2012) states: «Le 505 fut produit de 1978 a 1999 en 1,351,254 exemplaires, dont 1,116,868 berlines.»
^Bellu, René (2006). "Automobilia". Toutes les Voitures Françaises 1979 (Salon [Paris, Oct] 1978). Paris: Histoire & collections (84): 41.
^ abcCosta, André & Georges-Michel Fraichard, ed. (September 1979). "Salon 1979: Toutes les Voitures du Monde". l'Auto Journal (in French). No. 14 & 15. Paris: Homme N°1. p. 106.
^ abWyler, Martin (March 3, 1982). Büschi, Hans-Ulrich (ed.). "Am Wendepunkt/Tournant" [Turning point]. Automobil Revue '82 (in German and French). Berne, Switzerland: Hallwag, AG. 77: 57. ISBN3-444-06062-9.
^ abHogg, Tony (ed.). "Peugeot 505: "Progress not compromise, the Peugeot for the Eighties" — P.S.A. Peugeot-Citroën". Road & Track's Road Test Annual & Buyer's Guide 1981. No. January–February 1981. p. 142.
^Hogsten, Dag E. (1982-11-03). "Prylglädje och extra kraft" [Gadgets and extra power]. Teknikens Värld (in Swedish). Vol. 34, no. 22. Stockholm, Sweden: Specialtidningsförlaget AB. p. 54.
^Dickie, Neil (September 2009). "Thirty Years of the 505". Torque. Vol. 50, no. 8 ("909"). The Peugeot Car Club of Victoria. p. 14. Archived from the original on 2023-06-03.
_01_rotated.jpg)
_02.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
