| Prescott Pusher | |
|---|---|
| |
| Prescott Pusher | |
| Role | Homebuilt aircraft |
| National origin | United States |
| Manufacturer | Prescott Aeronautical Corporation |
| Designer | Tom Prescott |
| First flight | 9 July 1985[1] |
The Prescott Pusher is an American, four-seat, pusher configuration homebuilt aircraft, with a large cockpit, retractable or fixed gear, and a T-tail. The pilot and passengers enter the aircraft through a large left-side clamshell door.[2]
Company founder, Tom Prescott, worked for Sikorsky Aircraft, Piper Aircraft, and Learjet. He left Learjet in 1983 to produce the Prescott Pusher. It was tested using a 1/5 scale model in the Wichita State University wind tunnel in 1983. Flying scale models were tested in 1984, which led to the development of the drooped wing tips for better low speed handling and reduced drag. The aircraft was modeled using CAD/CAM software for creating drawings and defining machine cuts on the fuselage steel, becoming the first CAD/CAM designed homebuilt aircraft. The AVIA Products Co. rwas purchased to develop an electrically controlled variable pitch fiberglass pusher propeller.[3]
The Prescott Pusher was designed to FAR Part 23 certification standards of the time. It uses aluminum construction for the wings and tail surfaces. The fiberglass landing gear and flaps are hydraulically activated. The nosegear steering is also hydraulic with electric controls. The fuselage uses a 4130 steel welded square steel tube frame with composite skin covering. Every component can be installed prior to skin installation, and in theory, could even be flown without the skins. The wing skins are formed cold using dry ice, then age hardened to T-42 standards. The engine is mounted far aft with a 12-inch propeller extension.[3]
Prescott Aeronautical Corporation was founded by Tom Prescott in 1983. Prescott, who also served as company president, worked alongside Linden Blue investor and CEO, Les Jordan, head of marketing, and Steve Cain, head of public relations. The Prescott Pusher was first displayed at the Experimental Aircraft Association airshow in Oshkosh, Wisconsin in 1985. In 1989, having produced 68 kits, Prescott Aeronautical Corporation went out of business.[4] By 1991, there were approximately 25–35 builders completing their aircraft in various configurations.[5]
Data from Sport Aviation[3]
General characteristics
Performance
