Arithmetic operations v t e

Addition (+) ${\displaystyle \scriptstyle \left.{\begin{matrix}\scriptstyle {\text{term))\,+\,{\text{term))\\\scriptstyle {\text{summand))\,+\,{\text{summand))\\\scriptstyle {\text{addend))\,+\,{\text{addend))\\\scriptstyle {\text{augend))\,+\,{\text{addend))\end{matrix))\right\}\,=\,}$ ${\displaystyle \scriptstyle {\text{sum))}$ Subtraction (−) ${\displaystyle \scriptstyle \left.{\begin{matrix}\scriptstyle {\text{term))\,-\,{\text{term))\\\scriptstyle {\text{minuend))\,-\,{\text{subtrahend))\end{matrix))\right\}\,=\,}$ ${\displaystyle \scriptstyle {\text{difference))}$ Multiplication (×) ${\displaystyle \scriptstyle \left.{\begin{matrix}\scriptstyle {\text{factor))\,\times \,{\text{factor))\\\scriptstyle {\text{multiplier))\,\times \,{\text{multiplicand))\end{matrix))\right\}\,=\,}$ ${\displaystyle \scriptstyle {\text{product))}$ Division (÷) ${\displaystyle \scriptstyle \left.{\begin{matrix}\scriptstyle {\frac {\scriptstyle {\text{dividend))}{\scriptstyle {\text{divisor))))\\[1ex]\scriptstyle {\frac {\scriptstyle {\text{numerator))}{\scriptstyle {\text{denominator))))\end{matrix))\right\}\,=\,}$ ${\displaystyle \scriptstyle \left\((\begin{matrix}\scriptstyle {\text{fraction))\\\scriptstyle {\text{quotient))\\\scriptstyle {\text{ratio))\end{matrix))\right.}$ Exponentiation (^) ${\displaystyle \scriptstyle {\text{base))^{\text{exponent))\,=\,}$ ${\displaystyle \scriptstyle {\text{power))}$ nth root (√) ${\displaystyle \scriptstyle {\sqrt[{\text{degree))]{\scriptstyle {\text{radicand))))\,=\,}$ ${\displaystyle \scriptstyle {\text{root))}$ Logarithm (log) ${\displaystyle \scriptstyle \log _{\text{base))({\text{anti-logarithm)))\,=\,}$ ${\displaystyle \scriptstyle {\text{logarithm))}$

v t e

In mathematics, the remainder is the amount "left over" after performing some computation. In arithmetic, the remainder is the integer "left over" after dividing one integer by another to produce an integer quotient (integer division). In algebra of polynomials, the remainder is the polynomial "left over" after dividing one polynomial by another. The modulo operation is the operation that produces such a remainder when given a dividend and divisor.

Alternatively, a remainder is also what is left after subtracting one number from another, although this is more precisely called the difference. This usage can be found in some elementary textbooks; colloquially it is replaced by the expression "the rest" as in "Give me two dollars back and keep the rest."^[1] However, the term "remainder" is still used in this sense when a function is approximated by a series expansion, where the error expression ("the rest") is referred to as the remainder term.

Integer division

Given an integer a and a non-zero integer d, it can be shown that there exist unique integers q and r, such that a = qd + r and 0 ≤ r < |d|. The number q is called the quotient, while r is called the remainder.

(For a proof of this result, see Euclidean division. For algorithms describing how to calculate the remainder, see division algorithm.)

The remainder, as defined above, is called the least positive remainder or simply the remainder.^[2] The integer a is either a multiple of d, or lies in the interval between consecutive multiples of d, namely, q⋅d and (q + 1)d (for positive q).

In some occasions, it is convenient to carry out the division so that a is as close to an integral multiple of d as possible, that is, we can write

a = k⋅d + s, with |s| ≤ |d/2| for some integer k.

In this case, s is called the least absolute remainder.^[3] As with the quotient and remainder, k and s are uniquely determined, except in the case where d = 2n and s = ± n. For this exception, we have:

a = k⋅d + n = (k + 1)d − n.

A unique remainder can be obtained in this case by some convention—such as always taking the positive value of s.

Examples

In the division of 43 by 5, we have:

43 = 8 × 5 + 3,

so 3 is the least positive remainder. We also have that:

43 = 9 × 5 − 2,

and −2 is the least absolute remainder.

These definitions are also valid if d is negative, for example, in the division of 43 by −5,

43 = (−8) × (−5) + 3,

and 3 is the least positive remainder, while,

43 = (−9) × (−5) + (−2)

and −2 is the least absolute remainder.

In the division of 42 by 5, we have:

42 = 8 × 5 + 2,

and since 2 < 5/2, 2 is both the least positive remainder and the least absolute remainder.

In these examples, the (negative) least absolute remainder is obtained from the least positive remainder by subtracting 5, which is d. This holds in general. When dividing by d, either both remainders are positive and therefore equal, or they have opposite signs. If the positive remainder is r₁, and the negative one is r₂, then

r₁ = r₂ + d.

For floating-point numbers

When a and d are floating-point numbers, with d non-zero, a can be divided by d without remainder, with the quotient being another floating-point number. If the quotient is constrained to being an integer, however, the concept of remainder is still necessary. It can be proved that there exists a unique integer quotient q and a unique floating-point remainder r such that a = qd + r with 0 ≤ r < |d|.

Extending the definition of remainder for floating-point numbers, as described above, is not of theoretical importance in mathematics; however, many programming languages implement this definition (see modulo operation).

In programming languages

While there are no difficulties inherent in the definitions, there are implementation issues that arise when negative numbers are involved in calculating remainders. Different programming languages have adopted different conventions. For example:

• Pascal chooses the result of the mod operation positive, but does not allow d to be negative or zero (so, a = (a div d ) × d + a mod d is not always valid).^[4]
• C99 chooses the remainder with the same sign as the dividend a.^[5] (Before C99, the C language allowed other choices.)
• Perl, Python (only modern versions) choose the remainder with the same sign as the divisor d.^[6]
• Haskell and Scheme offer two functions, remainder and modulo – Ada, Common Lisp and PL/I have mod and rem, while Fortran has mod and modulo; in each case, the former agrees in sign with the dividend, and the latter with the divisor.

Polynomial division

Euclidean division of polynomials is very similar to Euclidean division of integers and leads to polynomial remainders. Its existence is based on the following theorem: Given two univariate polynomials a(x) and b(x) (where b(x) is a non-zero polynomial) defined over a field (in particular, the reals or complex numbers), there exist two polynomials q(x) (the quotient) and r(x) (the remainder) which satisfy:^[7]

${\displaystyle a(x)=b(x)q(x)+r(x)}$

where

${\displaystyle \deg(r(x))<\deg(b(x)),}$

where "deg(...)" denotes the degree of the polynomial (the degree of the constant polynomial whose value is always 0 can be defined to be negative, so that this degree condition will always be valid when this is the remainder). Moreover, q(x) and r(x) are uniquely determined by these relations.

This differs from the Euclidean division of integers in that, for the integers, the degree condition is replaced by the bounds on the remainder r (non-negative and less than the divisor, which insures that r is unique.) The similarity between Euclidean division for integers and that for polynomials motivates the search for the most general algebraic setting in which Euclidean division is valid. The rings for which such a theorem exists are called Euclidean domains, but in this generality, uniqueness of the quotient and remainder is not guaranteed.^[8]

Polynomial division leads to a result known as the polynomial remainder theorem: If a polynomial f(x) is divided by x − k, the remainder is the constant r = f(k).^[9][10]