This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages) This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.Find sources: "Ring, slide and hook" – news · newspapers · books · scholar · JSTOR (October 2011) (Learn how and when to remove this template message) This article possibly contains original research. Please improve it by verifying the claims made and adding inline citations. Statements consisting only of original research should be removed. (October 2011) (Learn how and when to remove this template message) This article's factual accuracy is disputed. Relevant discussion may be found on the talk page. Please help to ensure that disputed statements are reliably sourced. (April 2020) (Learn how and when to remove this template message) (Learn how and when to remove this template message)
Ring, Slide and Hook used in Intimate Apparel

Rings, slides and hooks are the accessories used in intimate apparel/lingerie used for adjustment and decorative functions. Rings, slides and hooks are commonly made of plastic and nylon coated metal and stainless steel.

Rings are used for joining straps to allow length adjustment and vary strap angle to bra cup. A ring can be in any shape, for example circular, rectangular, triangular or even heart and flower shaped.

A slide has its crossbar recessed below the planes of edges of the longitudinal limits, which limits sliding of the frame on a strap. The slide has its thickest portions at the centers of transverse bars at which the central bar merges with the remainder of the slide. The strap passes around the central bar or directly through one of the slots to a ring and returns through that slot across the central bar and through the other slot in the slide to the shoulder of the wearer.

Hook is a rectangular shape, similar to the slides but with an opening at its one end which used to hang detachable or multi-way straps to a bra. It is hooking bra shoulder straps to a strapless bra, re-positioning the straps to achieve the various looks, such as halter-neck and crossed-back.

History

Rings and slides have been used on apparel products since the 1800s. Found from the US patent document number 174,459 in year 1876, Alexander Adamson applied on suspenders – rings for providing varying strap angle and slide for positioning the back straps.[1]

From the US patent document number 863,159 in year 1907, Ellen M. Degenhart invented slides in a garment supporter, which is for strap length adjustment.[2]

Brassieres date from the early 1900s. At the initial stage, they are with the very simple design, made from two handkerchiefs and narrow strap, with no ring or slide for adjusting strap length. Later, slide was introduced to the brassiere for increasing or reducing the strap length. Found from the US patent document number 1,590,693 in year 1926, Elvira Campa McKeefrey put slides on straps. It is said the first bra with adjustable straps.[3]

However, rings launched on brassieres were much later about 1940s. Sam Samuels patented the invention in US, document number 2,246,638 in year 1941.[4]

The predecessor of hooks on brassieres was the buttons and buttonholes. The introduction of hooks was documented in US patent number 2,140,164 by William H. Moffatt in year 1938.[5]

Types

Ring, slide and hook have similar product form. They are designed with wide varieties in term of shape, size and material.

Material

Ring, slide and hook can be made with metal, metal with nylon coated, electro-plated metal and plastics. Metal gives the strongest strength among the four materials. Metal with nylon coated and electro-plated prevent oxidation and rusting. Metal with nylon coated and plastic provide wide range of colours for matching with the garment. The electro-plated only available in gold and silver colour, ultimate thin and modern appearance.

Shape

Shape of ring, slide and hook has huge variety, depend on the shape of mould from different manufacturers. The most common shape for ring is circle which looks like an "O". Triangle, rectangle, square, heart, star shape, rectangle with saw tooth shape or even flower shape can be found for the different purposes on intimate garment.

Most commonly seen slide and hook are in rectangular shapes which look like "8" and "9" respectively. The shape of slide usually varies in the size of two holes, which allows different sliding way. Different opening combinations are found for hook, e.g. "S" shape which has hook on each side, narrower hole and wide hook, double-crossbar for the hole and hook.

Size

Common size range for rings, slides and hooks is from 6 mm (0.24 in) to 30 mm (1.2 in). The range may vary, depending on different manufacturer's collection. For full-figured women bras, wider straps and elastics in used for good support of breast weight. The bigger rings and slides required (12 mm (0.47 in) or 15 mm (0.59 in)). On the other hand, smaller rings, slides and hooks (8 mm (0.31 in) or 10 mm (0.39 in)) are found on normal bras sizes (A cup and B cup). The most common size of ring, slide and hook are 10 mm (0.39 in), 12 mm (0.47 in) and 15 mm (0.59 in).There are extremely large rings and hooks can be found on the swimwear items work as the underband fastener and decoration.

Uses

Rings

Rings are usually found on the shoulder straps, where they function as a joint. For intimate apparel, the requirement of front strap can be different from back strap. The front strap is more decorative and stretchability is less of a concern while the back strap is required to have better stability when stretched. Therefore, the two different straps (front and back) and the ring found on intimate apparel are important to join the functions of the bra strap together.

Circular rings allow straps to be worn at different angles, and they are the most commonly used ring shape now.

Ring develops in more shapes nowadays like Rectangular, Triangular, Heart and even flower shape. 90° angles on Rectangular ring limited the angle of strap line on the shoulder. Strap won't be able to move outer or inner the shoulder.

Triangular shape on Ring can be found on the petite size intimate garment while the wearer has narrow shoulder. The straps can line inner the shoulders and avoid the straps slide off from shoulder. More application on the Triangular Ring is on the Racer Back Bras for joining the straps to underband.

Heart shape is performing similar function in different appearance.

Ring developed with Jaggy inner avoid the easy sliding by increase the friction between the Ring and straps.

Slides

Slide gives an adjustable function to the shoulder strap, or suspender belt on the most left hand side and the middle one.

Since women have different body shape, shoulder to breast measurement, length adjustment is an important function. Straps with slides allow wearers to adjust desired length on intimate garment. Slide has its crossbar recessed below the planes of edges of the longitudinal limits, which limits sliding of the frame on a strap. The slide has its thickest portions at the centers of transverse bars at which the central bar merges with the remainder of the slide. The strap passes around the central bar or directly through one of the slots to a ring and returns through that slot across the central bar and through the other slot in the slide to the shoulder of the wearer.

The slide shapes usually develop according to the Ring shape in order to match and function together. The inner shape of the slide is designing to suit the straps thickness and shapes.

Circular inner shape always using for spaghetti strap while rectangular inner shape is for wider flat strap. The height of inner is referring to the thickness of the straps.

Jaggy inner slide has the same function as jaggy inner ring, to reduce the ease of sliding the straps. Difference shapes developed for slide nowadays are for decorative function. Swimwear and Triangle bra found a big slide on the centre gore, on the most right hand side, these can be special shapes like Heart, Star and Flower shapes.

Hooks

Hook function as fastener on detachable shoulder strap or suspender belt, it is also function as a fastener on swimwear back closure and front-closure bra. A Multiway-Bra is playing the different straps positions on the Bra.

The most common type of hook is like a "9" shape, the circular part is used to hold the shoulder strap whereas the hook part is the fastening and joining shoulder strap on or off the bra.

"S" shape hook provide straps changing function. The one with narrow hole and wide hook is designed for special straps. More shapes provide for different using and security purpose.

Manufacturing process

Rings, slides and hooks are made with the similar materials, sizes and shapes.

There are various methods to produce them depending on the different raw materials and end used. The production will be with four main sections as follows.

  1. Preparation of raw materials
  2. Molding or stamping
  3. Colour finishing
  4. Inspection, packing and recycling

Preparation

There are three main types of raw material used in the industry. They are plastic, metal and alloy.

Plastic

Plastic items are produced by injection molding under around 400 degree. The plastics usually are acrylonitrile butadiene styrene (ABS), polyoxymethylene(POM) and polycarbonate (PC). POM is more popular among them. PC is used for transparent colour. Plastic items can be produced in a wide range of colour. They have no problem of corrosion, but they are less strength and less luster comparing with metal and alloy pieces. Two main steps are as follows.

  1. Preparing raw materials
    • Calculate lab-dip formula to meet colour specification
    • Mix polymers and colourants according to approved lab-dip
    • Dehydrate the mixtures for 12 hours
  2. Making mold
    • Design mold according to requirement – shape and size specification and they can be made of steel, aluminum, or metal alloy depending on the production volume
    • Make multi-cavity mold to have several copies of the same part to speed up the production time
    • The above steps can be skipped if the existing mold can be re-used

Metal

Metal items are produced by stamping press machine. They are mainly with the simple design e.g. 2D pattern. Metal pieces provide higher strength than plastics items, but less than alloy ones.

  1. Preparing raw materials
    • Select the corrected thickness and width of metal coiled strip to meet the design requirement
  2. Making stamping die
    • Design top and bottom dies, according to the requirement – shape and size specification, which can be steel, aluminum depending on the production volume

Alloy

Alloy pieces are done by injection molding machine. They can be designed with detailed lines/wordings. And, they provide more strength than pure metals.

  1. Preparing raw materials
    • Dehydrate the granules of metal alloy
  2. Making mold
    • Design mold according to the requirement – shape and size specification and they can be made of steel, aluminum, or metal alloy depending on the production volume
    • Make multi-cavity mold to have several copies of the same part to speed up the production time
    • The above steps can be skipped if the existing mold can be re-used

Molding or stamping

Plastic

Metal

Alloy

Colour finishing

The colour finishing process is only for metal and alloy items. For the plastic items, the colouring is done in the preparation phase.

After the preparation process, both of them will be sent to undergo the colouring treatment. There are two common methods used on rings, slides and hooks. One is done by nylon coating and another by electroplating. The thickness of the items depends on that of metal coiled strip / molded alloy pieces; and of nylon coating / electroplating layer. The process enhances the abrasion / wear resistance, corrosion protection and aesthetic qualities e.g. luster and colour. Nylon coating can provide a lot of colour selections on the finished items while electroplating is mainly in gold or silver.

Nylon coating

Electroplating

Inspection, packing and recycling

  1. Inspection
    • Filter out defective products, e.g. burn marks, colour streaks, struck pieces, uneven coating, etc.
  2. Packing
    • Count and weigh the certain pieces e.g. 500 or 1000 and put them into poly bag
    • Put multi-poly bags into carton box and be ready for delivery
  3. Recycling
    • Collect defective products, scrap from molded pieces and processed coiled strips
    • Send them to the recycling companies

References

  1. ^ Alexander Adamson, US patent document number 174,459, 1876
  2. ^ Ellen M. Degenhart, US patent document number 863,159, 1907
  3. ^ Elvira Campa McKeefrey, US patent document number 1,590,693, 1926
  4. ^ Sam Samuels, US patent document number 2,246,638, 1941
  5. ^ William H. Moffatt, US patent document number 2,140,164, 1938
Category