| Development | |
|---|---|
| Designer | Jerry Montgomery |
| Location | United States |
| Year | 2011 |
| Builder(s) | Sage Marine |
| Role | Day sailer-cruiser |
| Name | Sage 17 |
| Boat | |
| Displacement | 1,300 lb (590 kg) |
| Draft | 3.50 ft (1.07 m) with centerboard down |
| Hull | |
| Type | monohull |
| Construction | fiberglass and carbon fiber |
| LOA | 16.83 ft (5.13 m) |
| LWL | 15.58 ft (4.75 m) |
| Beam | 6.75 ft (2.06 m) |
| Engine type | outboard motor |
| Hull appendages | |
| Keel/board type | stub keel and centerboard |
| Ballast | 520 lb (236 kg) |
| Rudder(s) | transom-mounted rudder |
| Rig | |
| Rig type | Bermuda rig |
| Sails | |
| Sailplan | fractional rigged sloop |
| Mainsail area | 98 sq ft (9.1 m2) |
| Jib/genoa area | 54 sq ft (5.0 m2) |
| Total sail area | 152 sq ft (14.1 m2) |
The Sage 17 is an American trailerable sailboat that was designed by Jerry Montgomery as a daysailer and a pocket cruiser and first built in 2011.[1][2]
The design has been built by Sage Marine in Golden, Colorado, United States since 2011, although production was suspended in 2020 due to the COVID-19 pandemic.[1][3][4]
The Sage 17 is a recreational keelboat, built predominantly of carbon fiber, fiberglass with vinylester resin, with teak wood trim. The deck and coach house have a balsa core. It has a 7/8 fractional sloop rig with a single set of spreaders, a plumb stem, a vertical carbon fiber transom, a transom-hung rudder controlled by a tiller and a centerboard or optionally, a fixed fin keel. The boat displaces 1,300 lb (590 kg) and carries 120 lb (54 kg) of ballast in the centerboard, with an additional 400 lb (181 kg) of ballast in the keel.[1][2]
The boat has a draft of 3.50 ft (1.07 m) with the centerboard extended and 1.75 ft (0.53 m) with it retracted, allowing beaching or ground transportation on a trailer.[1]
The boat is normally fitted with a small outboard motor for docking and maneuvering.[1][2]
The design has sleeping accommodation for two people, with a double "V"-berth in the cabin. The head is located under the "V"-berth.[2]
For sailing the design may be equipped with a 54 sq ft (5.0 m2) working jib or 65 sq ft (6.0 m2) lapping jib, an 87 sq ft (8.1 m2) genoa or a 16 sq ft (1.5 m2) storm jib.[2]
Sail magazine named the design one of its Best Boats of 2013, describing it as, "a pretty, seamanlike little thing that’s sure to draw admiring looks way out of proportion to its size."[5]
In a 2013 review in Sail magazine, Kimball Livingston wrote, "on our test boat, the optional Tiller Clutch made it a cinch to lock off the helm, and with its pivoting centerboard and kick-up rudder, the Sage 17 inspires confidence in shoal water. It's easy to like this boat. Anyone looking for a pocket cruiser more or less like this little one should ask for a dance."[6]