 San Juan 21-2 | |
| Development | |
|---|---|
| Designer | Don Clark |
| Location | United States |
| Year | 1970 |
| No. built | 2600 (all models) |
| Builder(s) | Clark Boat Company |
| Role | cruiser-racer |
| Name | San Juan 21-2 |
| Boat | |
| Displacement | 1,250 lb (567 kg) |
| Draft | 4.00 ft (1.22 m) with centerboard down |
| Hull | |
| Type | Monohull |
| Construction | Fiberglass |
| LOA | 20.50 ft (6.25 m) |
| LWL | 17.50 ft (5.33 m) |
| Beam | 7.00 ft (2.13 m) |
| Engine type | Outboard motor |
| Hull appendages | |
| Keel/board type | centerboard |
| Ballast | 400 lb (181 kg) |
| Rudder(s) | transom-mounted rudder |
| Rig | |
| Rig type | Bermuda rig |
| I foretriangle height | 22.50 ft (6.86 m) |
| J foretriangle base | 8.21 ft (2.50 m) |
| P mainsail luff | 23.00 ft (7.01 m) |
| E mainsail foot | 8.75 ft (2.67 m) |
| Sails | |
| Sailplan | Fractional rigged sloop |
| Mainsail area | 100.63 sq ft (9.349 m2) |
| Jib/genoa area | 92.36 sq ft (8.581 m2) |
| Total sail area | 192.99 sq ft (17.929 m2) |
| Racing | |
| PHRF | 252 (average) |
The San Juan 21 is an American trailerable sailboat, that was designed by Don Clark as a cruiser-racer[1] and first built in 1970.[2][3][4]
The design was built by the Clark Boat Company in Kent, Washington, United States, as well as eventually opening a facility in New Bern, North Carolina,[1] but it is now out of production. A total of 2600 San Juan 21s were completed.[1][5][failed verification][2][6]
The design was introduced at the 1970 Seattle Boat Show and was well received.[6]
The San Juan 21 is a recreational keelboat, built predominantly of fiberglass with a balsa-cored cabin[1] and wood trim. It has a fractional sloop rig, a raked stem, a slightly reverse transom, a transom-hung rudder controlled by a tiller and a centerboard keel.[2][3]
The boat has a draft of 4.00 ft (1.22 m) with the centerboard extended and 1.00 ft (0.30 m) with it retracted, allowing beaching or ground transportation on a trailer.[2]
The boat is normally fitted with a small 2 to 6 hp (1 to 4 kW) outboard motor for docking and maneuvering with racing oriented owners preferring lighter weight outboards as the boat is sensitive to weight astern.[2][4][7]
The design has sleeping accommodation for four people, with a double "V"-berth in the bow cabin and two quarter berths in the main cabin under the cockpit. The head is located just aft of the bow cabin on the starboard side. Cabin headroom is 42 in (107 cm).[4]
For sailing downwind the design may be equipped with a symmetrical spinnaker.[2]
The design has a hull speed of 5.52 kn (10.22 km/h).[8][9]
This model was the last update and uses the same Cabin top and Hull as the Mark II but, has a different pan arrangement inside the cabin as well as removal of the aft mounted lazarette on boats produced on the east coast, while west coast boats retained the lazarette.[1]:
The boat is supported by an active class club that organizes racing events, the San Juan 21 Class Association .[10]
In a 2010 review Steve Henkel wrote, "the SJ21 has a very active racing association, unusual for a boat designed 30-plus years ago. An efficient foil-shaped rudder and swing keel, plus a sailcloth slot gasket, offer superior hydrodynamics compared with her comps. Worst features: The slot gasket, made of sailcloth (which bridges the gap across the trunk slot to prevent turbulence when sailing downwind with the keel raised), requires special maintenance (trimming of frayed edges and periodic replacement) to keep it smooth and effective. The advertised weight of 1,250 pounds may be low; some owners claim weights of 1,500 to 1,750 pounds."[4]
