Australian Cruiser Tank Mk. 1 "Sentinel"
An AC MkI tank on trials
Type	Cruiser tank
Place of origin	Australia
Production history
Designed	1941
Manufacturer	New South Wales Railway Company
Produced	1942-1943
No. built	65
Specifications
Mass	28 long tons (28.4 t)[1]
Length	20 feet 9 inches (6.32 m)
Width	9 feet 7⁄8 inch (2.77 m)
Height	8 feet 4+3⁄4 inches (2.56 m)
Crew	5 (Commander, Gunner, Loader/Operator, Driver, Hull MG gunner)
Armour	Hull front 65 millimetres (2.6 in) sides and rear 45 millimetres (1.8 in) Turret 65 millimetres (2.6 in) all round
Main armament	2 pounder tank gun, 130 rounds
Secondary armament	two .303 (7.7 mm) Vickers machine guns, 4,250 rounds
Engine	3 x Cadillac V8 330 horsepower (246 kW)[1]
Power/weight	12 hp/ton
Suspension	Horizontal Volute Spring
Operational range	150 miles (240 km)[1]
Maximum speed	30 miles per hour (48 km/h)

The AC1 Sentinel was a cruiser tank designed in Australia in World War II in response to the war in Europe, and to the threat of Japan expanding the war to the Pacific or even a feared Japanese invasion of Australia. It was the first tank to be built with a hull cast as a single piece, and the only tank to be produced in quantity in Australia. The few Sentinels that were built never saw action as Australia's armoured divisions had been equipped by that time with British and American tanks.^[2]

History

When design work began in November 1940, the AC1 was originally intended to be a 2 pounder gun-equipped vehicle, a true Cruiser tank,^[3] with a weight of between 16 and 20 tonnes.^[4] Due to a lack of home grown experience in tank design, a mission was sent to the US to examine the M3 design and Colonel W.D. Watson MC, an artillery officer with many years of tank design experience was provided by the UK. He arrived in December 1940.^[5] Like the Canadian Ram, the Australian Cruiser was to be based on the engine, drive train, and lower hull of the American M3 Medium tank,^[6] mated to an upper hull and turret built closely along the lines of a British Crusader. By 1942, attempting to keep pace with German tank developments,^[7] the design specification had become more like an American medium tank, resulting in a heavier design and a higher silhouette profile.^[4]

The Australian Cruiser tank Mark 1 (AC1) was designated "Sentinel" in February 1942.^[8] Manufactured by the New South Wales Railway Company,^[4] fabrication took place at Sydney's Chullora Tank Assembly Shops with serial production vehicles emerging in August 1942, the premises also being used as a testing ground. The design used existing parts where available from other tank designs, simplified where necessary to match the machining capacity present in Australia. The hull was cast as a single piece, as was the turret; a technique not used on the hull of any other tanks of the era.^[9]

The Sentinel was designed to mount either a QF 2 pounder or a QF 6 pdr (57 mm, 2.25 in).^[10] However, as the production order for 6 pounder tank guns had not been acted on, none of these were available and the first 65 tanks were built with the 2 pounder.^[8] Two Vickers machine guns were carried as secondary armament, one in the hull and a second mounted coaxially beside the main gun. The preferred engines suitable to power a 28 tonne tank, a Pratt & Whitney Wasp single row petrol radial, or a Guiberson diesel radial, were not available within Australia, so the Sentinel was powered by the combined output of three Cadillac V8 engines – petrol car engines with a displacement of 346 cu in (5.7 L) each. The three engines were installed in a clover-leaf configuration (two engines side-by-side to the front and a single to the rear) with all feeding power to a common gearbox.^[11]

Sixty-five production vehicles had been completed by June 1943.^[12] The completed Sentinel tanks were used for evaluation purposes only and were not issued to operational armoured units. The Australian Cruiser tank programme was terminated in July 1943 as it was thought better for Australia to put the effort spent on the AC tanks towards building her own railway locomotives and supporting the large number of US tanks due to arrive.^[13] The tanks that had been produced were placed in storage until the end of the war.^[14] In 1943, the 3rd Army Tank Battalion was equipped with a squadron of AC1 tanks that had been modified to resemble German tanks. These tanks were used in the filming of the movie The Rats of Tobruk. This appears to have been the only time a squadron of Sentinels was used for any purpose.^[15]

Further experiments

The Sentinel was to be succeeded by the AC3 Thunderbolt, a much improved design with better armour protection, and most importantly increased firepower. The next step up in firepower available in Australia was the 25 pounder (87.6 mm, 3.45 in) gun-howitzer. This was quickly redesigned as a tank gun, work that would later prove useful for the design of the Short 25 Pounder.^[16]

In an effort to further improve the firepower of the Australian produced tanks, a new turret was built and placed on the first of the earlier development vehicles to assess the vehicle's ability to mount the foremost Allied anti-tank gun of the day – the British 17 pounder (76 mm, 3 in). This was achieved by mounting two 25 pounder gun-howitzers that, when fired together, would significantly exceed the recoil of a 17 pounder.^[17] It was later fitted with a 17 pounder and after successful gunnery trials the 17 pounder was selected for the AC4 tank. On the AC4 tank, the 17 pounder was to be mounted in a new and larger turret, attached by a 70 inch (1778 mm) diameter turret ring, the space for which was accommodated by changes to the upper hull permitted by the compact nature of the "Perrier-Cadillac".^[8] The design for the AC4 tank was not finalised before the programme ended.^[18]

Survivors

All but three tanks were disposed of by the Australian government in 1945.^{[19][20][Note 1]} The 65 tanks that were not required to serve as a physical record in war museums in Australia and the UK were sold off by the Commonwealth Disposals Commission.^[19]

Of the three that were retained, the first is at the RAAC tank museum at Puckapunyal Victoria (AC1 serial number 8030), the second is at the Bovington Tank Museum (AC1 serial number 8049), the third and only completed AC3 (serial number 8066) is located at the Treloar Resource Centre at the Australian War Memorial in Canberra.^[14]

From those that were sold, mostly for agricultural use, a third AC1 was reassembled at the Melbourne Tank Museum using the hull of AC1 8006 and the turret of AC1 8040. This tank was sold to the Military Vehicle Technology Foundation when the Melbourne Tank Museum closed in 2006, and subsequently bought by Wargaming when the MVTF collection was partly auctioned in 2014. It was placed on exhibit at the Camp Mabry Museum in Austin, Texas,^[21] for a period before being shipped to the Australian Armour and Artillery Museum to be repainted and put on display.^[22] A second Australian cruiser tank is also on display at the AAAM. This tank, acquired from the MTM, has a largely uncut hull, with turret, gearbox and running gear, otherwise bare inside. This vehicle consists of the hull of AC1 8040 and an AC3 turret. The tank was externally restored in 2014. It now has a 17 pounder barrel in an attempt to represent the AC4 prototype; the mantlet and gun mount were fabricated by the AAAM.^[23] An AC3 mockup was assembled from unused AC3 armour castings and a mix of AC3 and AC1 parts at the Melbourne Tank Museum in 1996–97, this piece was sold to a private collector in 2006.^[24]

Variants

• AC IA^[8]
  • 1x QF 6-pounder gun
  • 1x Vickers machine gun
  • 3x Cadillac V8 engines
• AC IB^[8]
  • 1x QF 25 pounder gun
  • 1x Vickers machine gun
  • 3x Cadillac V8 engines
• AC III "Scorpion"^[8] An AC1 that was to be produced in Victoria with mostly components imported from the US. Not related to the AC3 Thunderbolt.
  • 1x QF 2-pounder gun
  • 2x Vickers machine gun
  • 1x single-row Wasp radial engine