You do not have permission to edit this page, for the following reasons:

This IP address has been blocked from editing Wikipedia.
This does not affect your ability to read Wikipedia pages.
Most people who see this message have done nothing wrong. Some kinds of blocks restrict editing from specific service providers or telecom companies in response to recent abuse or vandalism, and can sometimes affect other users who are unrelated to that abuse. Review the information below for assistance if you do not believe that you have done anything wrong.

The IP address or range 18.206.0.0/16 has been blocked (disabled) by ‪ST47‬ for the following reason(s):

The IP address that you are currently using has been blocked because it is believed to be a web host provider. To prevent abuse, web hosts may be blocked from editing Wikipedia.
You will not be able to edit Wikipedia using a web host provider because it hides your IP address, much like a proxy or VPN.
We recommend that you attempt to use another connection to edit. For example, if you use a proxy or VPN to connect to the internet, turn it off when editing Wikipedia. If you edit using a mobile connection, try using a Wi-Fi connection, and vice versa. If you are using a corporate internet connection, switch to a different Wi-Fi network. If you have a Wikipedia account, please log in.
If you do not have any other way to edit Wikipedia, you will need to request an IP block exemption.

How to appeal if you are confident that your connection does not use a web host's IP address:
If you are confident that you are not using a web host, you may appeal this block by adding the following text on your talk page: ((unblock|reason=Caught by a web host block but this host or IP is not a web host. My IP address is _______. Place any further information here. ~~~~)). You must fill in the blank with your IP address for this block to be investigated. Your IP address can be determined here. Alternatively, if you wish to keep your IP address private you can use the unblock ticket request system. There are several reasons you might be editing using the IP address of a web host (such as if you are using VPN software or a business network); please use this method of appeal only if you think your IP address is in fact not a web host.

Administrators: The IP block exemption user right should only be applied to allow users to edit using web host in exceptional circumstances, and they should usually be directed to the functionaries team via email. If you intend to give the IPBE user right, a CheckUser needs to take a look at the account. This can be requested most easily at SPI Quick Checkuser Requests. Unblocking an IP or IP range with this template is highly discouraged without at least contacting the blocking administrator.

This block will expire on 05:36, 30 September 2026.

Even when blocked, you will usually still be able to edit your user talk page, as well as email administrators and other editors.

For information on how to proceed, please read the FAQ for blocked users and the guideline on block appeals. The guide to appealing blocks may also be helpful.

Other useful links: Blocking policy · Help:I have been blocked
Your IP address is in a range that has been blocked on all Wikimedia Foundation wikis. The block was made by ‪Jon Kolbert‬. The reason given is Open proxy/Webhost: See the help page if you are affected .
- Start of block: 05:37, 21 February 2024
- Expiry of block: 05:37, 21 February 2029
Your current IP address is 18.206.153.34. The blocked range is 18.206.0.0/16. Please include all above details in any queries you make. If you believe you were blocked by mistake, you can find additional information and instructions in the No open proxies global policy. Otherwise, to discuss the block please post a request for review on Meta-Wiki. You could also send an email to the stewards VRT queue at stewards@wikimedia.org including all above details.

You can view and copy the source of this page:

((Unreferenced|date=September 2018))
[[File:US Navy 110406-N-OY799-152 Machinery Repairman 3rd Class Heather Fogle, from Midlothian, Texas, checks the outside diameter of a shear pin in the m.jpg|thumb|A sailor checks the outside diameter of a shear pin in the machinery repair shop aboard US aircraft carrier [[USS John C. Stennis|''John C. Stennis'']].]]

A '''shear pin''' is a mechanical detail designed to allow a specific outcome to occur once a predetermined force is applied. It can either function as a safeguard designed to break to protect other parts, or as a conditional operator that will not allow a mechanical device to operate until the correct force is applied.

==As safeguards==
In the role of a mechanical safeguard, a shear pin is a safety device designed to [[Shearing (physics)|shear]] in the case of a mechanical overload, preventing other, more expensive or less-easily replaced parts from being damaged. As a mechanical [[sacrificial part]], it is analogous to an [[electric fuse]].

They are most commonly used in [[Powertrain|drive trains]], such as a [[snow blower]]'s [[Screw conveyor|auger]] or the [[propeller]]s attached to marine engines.

Another use is in [[pushback (aviation)|pushback]] bars used for large [[aircraft]]. In this device, shear pins are frequently used to connect the "head" of the towbar – the portion that attaches to the aircraft – to the main shaft of the towbar. In this way, the failure of the shear pin will physically separate the aircraft and the tractor. The design may be such that the shear pin will have several different causes of failure – towbar rotation about its long axis, sudden braking or acceleration, excessive steering force, etc. – all of which could otherwise be extremely damaging to the aircraft.

==As conditional operators==
In the role as a conditional operator, a shear pin will be used to prevent a mechanical device from operating before the criteria for operation are met. A shear pin gives a distinct threshold for the force required for operation. It is very cheap and easy to produce delivering a very high reliability and predictable tolerance. They are almost maintenance-free and can remain ready for operation for years with little to no decrease in reliability. Shear pins are only useful for a single operating cycle, after each operation they have to be replaced. A very simple example is the plastic or wire loop affixed to the handles of common [[fire extinguisher]]s. Its presence prevents accidental discharge by only allowing the handle to be depressed once a high amount of initial force is applied; by breaking, it allows the handle to subsequently be depressed more easily.

Many designs take advantage of the maintenance-free state of constant readiness. For example, a hydraulic damper protecting a structure from earthquake damage could be secured with a shear pin. During normal conditions the system would be completely rigid, but when acted upon by the force of an earthquake the shear pin would break and the hydraulic damping system would operate.

Their high reliability and low cost make them very popular for use in weapons. A typical example is using shear pins in an explosive device. A shear pin can here hold a striker pin in place, preventing the striker pin from striking an initiator (primer) unless the correct force is applied. That force can be the acceleration of a rifle [[grenade]] being launched. The force would snap the shear pin, allowing the striker pin to move backwards onto a primer, which in turn ignites a pyrotechnic delay composition for auto destruction. In this use shear pins prevent the striker pin from hitting the primer during handling or if the grenade was dropped by accident. Additionally, shear-pins are frequently used in [[anti-tank mine]] [[fuze]]s, to prevent them from being triggered by much lighter, non-target vehicles such as motorcycles. Typically, the shear-pin in an anti-tank mine is designed to snap (and release the spring-loaded [[firing pin]]) when a weight in excess of 1500 kilograms is applied to the pressure plate.

==Material==
A shear pin could potentially be made from any material although metal is the most common.

When making a metal object for a mechanical application, an [[alloy]] and [[Tempering (metallurgy)|tempering]] is usually selected to make the construction resistant to damage. This can for example be achieved by giving the material a high degree of elasticity so that, like a spring, the metal returns to its original shape after being deformed by an external force. A shear pin however is often tempered to make the metal [[Brittleness|brittle]], so that it breaks or shatters rather than bends when the required force is applied.

The material of a shear pin is selected and treated so that it is relatively resistant to [[Fatigue (material)|fatigue]]. That is, when subjected to small forces, each one insufficient to break the pin, the pin does not retain damage. If material fatigue were to weaken a shear pin, the pin could potentially be broken by a force smaller than the original threshold force causing the mechanism to operate unintentionally, or a safety shear pin to break during normal operation of the machinery it protects.

==Construction==
The pin itself may be as simple as a metal rod inserted into a channel drilled through two moving parts, locking them in place as long as the pin is intact.

It may also be a plain [[metal]] rod inserted through a hub and axle; the diameter of the rod, alloy and tempering of the metal, are all carefully chosen to allow the pin to [[Shearing (physics)|shear]] only when the predetermined threshold [[force]] or [[Shock (mechanics)|shock]] is reached.

A [[split pin]] (''cotter pin'' in American usage) can also be used as a shear pin.

==See also==
*[[Bolted joint]]
*[[Torque limiter]]

<!--
==References==
((Reflist))-->

==External links==
*((Commonscatinline|Shear pin))

[[Category:Hardware (mechanical)]]
[[Category:Mechanical engineering]]
[[Category:Safety equipment]]
[[Category:Torque]]

Pages transcluded onto the current version of this page (help):

Template:Ambox (view source) (template editor protected)
Template:Commons category-inline (view source) (template editor protected)
Template:Commonscatinline (view source) (template editor protected)
Template:Find sources mainspace (view source) (template editor protected)
Template:If empty (view source) (protected)
Template:Sister-inline (view source) (template editor protected)
Template:Unreferenced (view source) (template editor protected)
Module:Arguments (view source) (protected)
Module:Category handler (view source) (protected)
Module:Category handler/blacklist (view source) (protected)
Module:Category handler/config (view source) (protected)
Module:Category handler/data (view source) (protected)
Module:Category handler/shared (view source) (protected)
Module:Commons link (view source) (template editor protected)
Module:Find sources (view source) (template editor protected)
Module:Find sources/config (view source) (template editor protected)
Module:Find sources/links (view source) (template editor protected)
Module:Find sources/templates/Find sources mainspace (view source) (template editor protected)
Module:If empty (view source) (protected)
Module:Message box (view source) (protected)
Module:Message box/ambox.css (view source) (protected)
Module:Message box/configuration (view source) (protected)
Module:Namespace detect/config (view source) (protected)
Module:Namespace detect/data (view source) (protected)
Module:Unsubst (view source) (protected)
Module:Yesno (view source) (protected)

Return to Shear pin.

Retrieved from "https://en.wikipedia.org/wiki/Shear_pin"