Silver sulfide
Ball-and-stick model of silver sulfide
Sample of silver sulfide
Names
IUPAC name
Silver(I) sulfide
Other names
Silver sulfide
Argentous sulfide
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.040.384 Edit this at Wikidata
EC Number
  • 244-438-2
UNII
  • InChI=1S/2Ag.S/q2*+1;-2 ☒N
    Key: XUARKZBEFFVFRG-UHFFFAOYSA-N ☒N
  • [S-2].[Ag+].[Ag+]
Properties
Ag2S
Molar mass 247.80 g·mol−1
Appearance Grayish-blackish crystal
Odor Odorless
Density 7.234 g/cm3 (25 °C)[1][2]
7.12 g/cm3 (117 °C)[3]
Melting point 836 °C (1,537 °F; 1,109 K)[1]
6.21·10−15 g/L (25 °C)
6.31·10−50
Solubility Soluble in aq. HCN, aq. citric acid with KNO3
Insoluble in acids, alkalies, aqueous ammoniums[4]
Structure
Cubic, cI8 (α-form)
Monoclinic, mP12 (β-form)
Cubic, cF12 (γ-form)[3][5]
Im3m, No. 229 (α-form)[5]
P21/n, No. 14 (β-form)
Fm3m, No. 225 (γ-form)[3]
2/m (α-form)[5]
4/m 3 2/m (β-form, γ-form)[3]
a = 4.23 Å, b = 6.91 Å, c = 7.87 Å (α-form)[5]
α = 90°, β = 99.583°, γ = 90°
Thermochemistry
76.57 J/mol·K[6]
143.93 J/mol·K[6]
−32.59 kJ/mol[6]
−40.71 kJ/mol[6]
Hazards
Occupational safety and health (OHS/OSH):
Main hazards
 May cause irritation
GHS labelling:
GHS07: Exclamation mark[2]
Warning
H315, H319, H335[2]
P261, P305+P351+P338[2]
NFPA 704 (fire diamond)
[7]
NFPA 704 four-colored diamondHealth 0: Exposure under fire conditions would offer no hazard beyond that of ordinary combustible material. E.g. sodium chlorideFlammability 0: Will not burn. E.g. waterInstability 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
0
0
0
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

Silver sulfide is an inorganic compound with the formula Ag
2S. A dense black solid, it is the only sulfide of silver. It is useful as a photosensitizer in photography. It constitutes the tarnish that forms over time on silverware and other silver objects. Silver sulfide is insoluble in most solvents, but is degraded by strong acids. Silver sulfide is a network solid made up of silver (electronegativity of 1.98) and sulfur (electronegativity of 2.58) where the bonds have low ionic character (approximately 10%).

Formation

Silver sulfide naturally occurs as the tarnish on silverware. When combined with silver, hydrogen sulfide gas creates a layer of black silver sulfide patina on the silver, protecting the inner silver from further conversion to silver sulfide.[8] Silver whiskers can form when silver sulfide forms on the surface of silver electrical contacts operating in an atmosphere rich in hydrogen sulfide and high humidity.[9] Such atmospheres can exist in sewage treatment and paper mills.[10][11]

Structure and properties

Three forms are known: monoclinic acanthite (β-form), stable below 179 °C, body centered cubic so-called argentite (α-form), stable above 180 °C, and a high temperature face-centred cubic (γ-form) stable above 586 °C.[5] The higher temperature forms are electrical conductors. It is found in nature as relatively low temperature mineral acanthite. Acanthite is an important ore of silver. The acanthite, monoclinic, form features two kinds of silver centers, one with two and the other with three near neighbour sulfur atoms.[12] Argentite refers to a cubic form, which, due to instability in "normal" temperatures, is found in form of the pseudomorphosis of acanthite after argentite.

History

In 1833 Michael Faraday noticed that the resistance of silver sulfide decreased dramatically as temperature increased. This constituted the first report of a semiconducting material.[13]

Silver sulfide is a component of classical qualitative inorganic analysis.[14]

References

  1. ^ a b Lide, David R., ed. (2009). CRC Handbook of Chemistry and Physics (90th ed.). Boca Raton, Florida: CRC Press. ISBN 978-1-4200-9084-0.
  2. ^ a b c d Sigma-Aldrich Co., Silver sulfide. Retrieved on 2014-07-13.
  3. ^ a b c d Tonkov, E. Yu (1992). High Pressure Phase Transformations: A Handbook. Vol. 1. Gordon and Breach Science Publishers. p. 13. ISBN 978-2-88124-761-3.
  4. ^ Comey, Arthur Messinger; Hahn, Dorothy A. (February 1921). A Dictionary of Chemical Solubilities: Inorganic (2nd ed.). New York: The MacMillan Company. p. 835.
  5. ^ a b c d e "Silver sulfide (Ag2S) crystal structure". Non-Tetrahedrally Bonded Elements and Binary Compounds I. Landolt-Börnstein - Group III Condensed Matter. Vol. 41C. Springer Berlin Heidelberg. 1998. pp. 1–4. doi:10.1007/10681727_86. ISBN 978-3-540-31360-1.
  6. ^ a b c d Pradyot, Patnaik (2003). Handbook of Inorganic Chemicals. The McGraw-Hill Companies, Inc. p. 845. ISBN 978-0-07-049439-8.
  7. ^ "MSDS of Silver Sulfide". saltlakemetals.com. Utah, USA: Salt Lake Metals. Archived from the original on 2014-08-10. Retrieved 2014-07-13.
  8. ^ Zumdahl, Steven S.; DeCoste, Donald J. (2013). Chemical Principles (7th ed.). Cengage Learning. p. 505. ISBN 978-1-111-58065-0.
  9. ^ "Degradation of Power Contacts in Industrial Atmosphere: Silver Corrosion and Whiskers" (PDF). 2002.
  10. ^ Dutta, Paritam K.; Rabaey, Korneel; Yuan, Zhiguo; Rozendal, René A.; Keller, Jürg (2010). "Electrochemical sulfide removal and recovery from paper mill anaerobic treatment effluent". Water Research. 44 (8): 2563–2571. Bibcode:2010WatRe..44.2563D. doi:10.1016/j.watres.2010.01.008. ISSN 0043-1354. PMID 20163816.
  11. ^ "Control of Hydrogen Sulfide Generation | Water & Wastes Digest". www.wwdmag.com. 5 March 2012. Retrieved 2018-07-05.
  12. ^ Frueh, A. J. (1958). The crystallography of silver sulfide, Ag2S. Zeitschrift für Kristallographie-Crystalline Materials, 110(1-6), 136-144.
  13. ^ "1833 - First Semiconductor Effect is Recorded". Computer History Museum. Retrieved 24 June 2014.
  14. ^ Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 978-0-08-037941-8.

External links

Wikimedia Commons has media related to Silver sulfide.
Silver compounds
Sulfides (S2−)
Authority control databases: National
Categories